Includes 2 Splice Ferrules, 1 End Ferrule,3 Glue Packages, 1 Emery Cloth
and a canvas storage bag (mounts on reel)

End Ferrule Repair Kit for Little Buddy Fish Tape Includes End Ferrule, Adhesive, Emery Cloth, Instructions. use with Jameson Little Buddy Duct Rodder.

Jam 10-146 End Ferrule Splice Kit Litttle Buddy

JAMESON 10-160 PULLING EYE FOR LITTLE BUDDY FISH TAPE.

Splice repair kit includes splice ferrule, epoxy glue package and emery cloth. Splice. Repair Kit For Big Buddy 1/2" Jameson 11-140.

Roller Guide for Big Buddy. Guides rod around bends, sweeps, misalignment's, wires.

Swivel coupling connects two rods when single length is not long enough it provides rotation when pulling line, wire or rope. For Big Buddy 1/2" rod

The flexible stinger tip attaches to the end fitting of your Big Buddy®/Mega Buddy®. Ideal accessory for guiding rod through bends, sweeps and misalignments. Includes (1) stinger tip with 3/8-16 thread. Guides rod through bends, sweeps and misalignments

Stinger Tip 6 FT. Big Buddy Jameson 11-25-6ST

Replacement Feed Roller for Big Buddy Guide Pulley Jameson 11-5
The replacement Feed Roller is easy to install and ensures smooth and easy operation when feeding your Big Buddy Rod.

Big Buddy® EZ-REEL™ Conduit Rodder, 1/2 in. x 500 ft. Replacement Rod.
Jameson introduced EZ-REEL™ pre-loaded replacement reels, providing improved speed and safety when replacing damaged duct rod.

Big Buddy® EZ-REEL™ Conduit Rodder, 1/2 in. x 600 ft. Replacement Rod.
Jameson introduced EZ-REEL™ pre-loaded replacement reels, providing improved speed and safety when replacing damaged duct rod.

Marked Duct Rodder, Good Buddy II 3/8" x 400' Jameson 11A-25-400M is available in lengths up to 600', the....

EZ-Reel® pre-loaded replacement reels improve speed and safety of swapping out damaged duct rod.

This splice kit is designed for 5/16-in. diameter fiberglass rod and includes everything you need to fix your Duct Hunter's broken rod. Kit includes (1) splice ferrule, (1) emery cloth and (1) two-component epoxy adhesive set.

Duct Hunter™ EZ-REEL™, 5/16 in. x 400 ft. Replacement Rod.
Jameson introduced EZ-REEL™ pre-loaded replacement reels, providing improved speed and safety when replacing damaged duct rod.

Includes Roller Guide, End Ferrule, Splice Ferrule, 2 Adhesives,
2 Emery Cloth and a canvas storage bag (mounts on reel)

Jameson splicer repair kit comes with splice ferrule, adhesive, emery cloth, and instructions. Use with Duct Hunter 7/16 Detectable Rodder Traceable Rodder

Includes Roller Guide, End Ferrule, Splice Ferrule, 2 Adhesives, 2 Emery Cloth and a canvas storage bag. (mounts on reel).

The Mini-Duct Hunter™ Accessory Kit is designed for 3/16-in. diameter fiberglass rod and includes everything you need to splice broken rod or replace end ferrules on the job site.

The Duct Hunter Accessory Kit is designed for 1/4-inch diameter fiberglass rod and includes everything you need to splice broken rod or replace end ferrules on the job site. All items store in a canvas pouch that attaches to the rodder frame for easy access. For use with fiberglass rod measuring 1/4 inch in diameter Includes a canvas pouch with (1) heavy-duty spring leader with chain, (1) end ferrule, (1) splice ferrule, (2) emery cloths, (2) two-component epoxy adhesive sets and (1) piece of heat shrink tubing.

1/4 in. Duct Hunter™ Splice Repair Kit. Splice Ferrule, Adhesive, Shrink Tube, Emery Cloth, Instructions

Jameson Swivel Eye for the Easy Buddy. Attaches to end fitting of rod so pull line can be attached to rod.

The accessory kit is designed for 1/4-in. diameter fiberglass rod and includes everything you need to splice broken rod or replace end ferrules on the job site.

The splice repair kit is designed for 1/4-in. diameter fiberglass rod and includes everything you need to fix your Easy Buddy broken rod.
Kit includes

• (1) splice ferrule
• (1) emery cloth
• (1) two-component expoxy adhesive set.

Roller Guide for Easy Buddy.  guide rod though bends, sweeps, misalignment's, wires.

Swivel Coupling connects two rods when single length is not long enough. It provides rotation when pulling line, wire or rope.

The end ferrule repair kit is designed for 1/4-in. diameter fiberglass rod and includes everything you need to replace your Easy Buddy® end ferrule.
Kit includes

• (1) end ferrule with 5/16 UNC-2A thread
• (1) emery cloth and
• (1) two-component epoxy adhesive set.

Use the loop section of the Easy Buddy Rod Grapple as a leader on the first rod, and push the rod into the duct....

The fixed pulling eye attaches to the end fitting of your Easy Buddy®. It is the ideal accessory for attaching pull line or grips to the rod. Includes (1) pulling eye with 5/16 UNC-2A thread.

This flexible spring leader attaches to the end fitting of your Easy Buddy®. It is has a pulling eye for attaching pull line or grips to the rod. Includes (1) flexible leader with pulling eye with 5/16 UNC-2A thread.

The 1/4" Sonde Adapter is used with Jameson's Buddy System of Conduit Rodders or the Duct Hunter System of Traceable
Rodders to locate in underground pipes or conduit. Sonde Adapters vary in size. This adapter fits the 1/4" Easy Buddy Duct Rodder.
Size: 1/4"

Replacement Rod Easy Buddy® EZ-REEL™, 1/4 in. x 300 ft.
EZ-REEL™ pre-loaded replacement reels, providing improved speed and safety when replacing damaged duct rod.

Replacement Rod Easy Buddy® Conduit Rodder EZ-Reel, 1/4" x 400', Marked Every 5'

Jameson 6-5 Replacement Feed Roller for Easy Buddy Rodder.
The replacement Feed Roller easy to install and ensures smooth and easy operation when feeding your Big Buddy Rod.

Easy Buddy® Conduit Rodder EZ-Reel, 1/4" x 500', Marked Every 5'

Includes 2 Splice Ferrules, 1 End Ferrule,3 Glue Packages, 1 Emery Cloth
and a canvas storage bag (mounts on reel)

This splice repair kit is designed for 3/8-in. diameter fiberglass rod and includes everything you need to fix your Good Buddy® broken rod.
Kit includes

• (1) splice ferrule,
• (1) emery cloth and
• (1) two-component epoxy adhesive set.

Jameson This end ferrule repair kit is designed for 3/8-in. diameter fiberglass rod and includes everything you need to replace your Good Buddy® end ferrule. Kit includes (1) end ferrule with 3/8-16 thread, (1) emery cloth and (1) two-component epoxy adhesive set.

Use the loop section of the Good Buddy Rod Grapple as a leader on the first rod, and....

To locate underground pipes or conduit, use sonde with Jameson's Buddy® Rodders and Fish Tapes or Duct Hunter™ Traceable Rodders. The heavy duty flexible chain adapter attaches rod to sonde. Fits 3/8" & 1/2" Buddy Rodders, 5/16" & 7/16" Duct Hunter Traceable Rodders.

Jameson flexible 12” x 3/16” dia. fiberglass stinger tip with fixed brass pulling eye easily attaches to the threaded end-ferrule on 3/8” Dia. Good Buddy® Conduit Rodders. This is the perfect accessory for guiding the rodder through tight bends, sweeps, and misalignments.
Includes
(1) stinger tip with 3/8 in., 5/15 in. and 7/16in. rods.

Jameson flexible 24” x 3/16” dia. fiberglass stinger tip with fixed brass pulling eye easily attaches to the threaded end-ferrule on 3/8” dia. Good Buddy® Conduit Rodders. This is the perfect accessory for guiding the rodder through tight bends, sweeps, and misalignments.
Includes
(1) stinger tip with 3/8 in., 5/15 in. and 7/16in. rods.

Includes 1 Splice Ferrule, 1 End Ferrule, 2 Glue Packages, 1 Emery Cloth
and a canvas storage bag (mounts on reel)

Includes 2 Splice Ferrules, 1 End Ferrule,3 Glue Packages, 1 Emery Cloth
and a canvas storage bag (mounts on reel)

Big Buddy® EZ-REEL™ Conduit Rodder, 1/2 in. x 800 ft. Replacement Rod.
Jameson introduced EZ-REEL™ pre-loaded replacement reels, providing improved speed and safety when replacing damaged duct rod.