You are here: Home > Underground Tools > Cable Sheaves
We found 62 results matching your criteria.
Condux Sheaves Current Tools and Sheaves Fiber Optic Underground Sheaves
GMP Sheaves Hogg & Davis Collapsible Power Reels
Cable Sheaves

Sort By:
1
Condux 08637825 24" Overhead Fiber Optic Cable Sheave 24" Overhead Fiber Optic Cable Sheave Condux 08637825

3" X 24 (22) FO OVERHEAD FIVER OPTIC SHEAVE
Specially designed in cooperation with Alcoa Fujikura Ltd. for
guiding fiber optic or CATV cable safely and efficiently. Condux Cable Sheaves feature an innovative hanger arm that eliminates the possibility of cable coming off the sheave or binding against the support arm. With the removal of a pin, the hanger arm separates and allows cable to be slipped in easily, even at midpoints. Aka Bicycle Wheel.
12-inch (305 mm) or 24-inch (610 mm) sheave diameters allow for a gentle cable arc. Aluminum sheave construction means durability with less weight. Maximum capacity is 1,500 lbs.


Condux 08637800 24" Underground Fiber Optic Cable Sheave 24" Underground Fiber Optic Cable Sheave Condux 08637800

The Underground Fiber Optic Sheave has all the features of the Overhead Sheave but with an additional second arm for convenient tie-off. Replacement Sheaves available.

Specially designed in cooperation with Alcoa Fujikura Ltd. for guiding fiber optic or CATV cable safely and efficiently, Condux Cable Sheaves feature an innovative hanger arm that eliminates the possibility of cable coming off the sheave or binding against the support arm. With the removal of a pin, the hanger arm separates and allows cable to be slipped in easily, even at midpoints.

12-inch (305 mm) or 24-inch (610 mm) sheave diameters allow for a gentle cable arc. Aluminum sheave construction means durability with less weight. Maximum capacity is 1,500 lbs.

Condux 08042611 - 4K Single Hooked Hanger Sheave Aluminum 5"X11" 4K Single Hooked Hanger Sheave Aluminum 5"X11" Condux 08042611

Tie off in manhole to guide cable into and out of duct. 4,000 lbs cable tension load capacity. For less demanding cable pulling applications than Condux 10,000 lbs sheaves, replacement Sheaves available.
Sheave size: 5" X 11"
127 X 279(mm)
Forged hook with 1.12" opening
Material: Aluminum


CONDUX 60 Degree Quad Block 8" 08539220 60 Degree Quad Block 8" Condux 08539220

A series of 6 Nylatron® sheaves allow cable to make a gradual 60° turn
for easy pulling through manhole or pull box openings.
Support bar sold separately.

GMP 10727 Alloy Capstan  7" Alloy Capstan 7" GMP 10727

This general purpose capstan is used for a wide variety of pulling and hoisting applications. Cast from a high strength aluminum alloy for low weight. Will fit on any 2-7/16 in. (62 mm) diameter winch extension shaft equipped with a bayonet or pin type mount. The working surface is 7-1/4 in. diameter x 8 in. (184 mm x 200 mm) wide. The maximum allowable pull is 4000 lbs. (1814 kgs).

Our Price: $775.09
Huskie Tools MCB750 BULLDOG CABLE BENDER BIG DADDY 3-PIECE SET (750 MCM) BULLDOG CABLE BENDER BIG DADDY 3-PIECE SET (750 MCM) Huskie Tools MCB750

Bending large gauge electrical cables is difficult, especially in tight spaces. Bulldog Bender gives you the power and leverage to easily install, bend, & terminate cables in service panels, LB conduit bodies, switch gear, motor controls, wireways, and meter bases.

  • Four tool sizes cover wide range of cable sizes up to 1000 MCM.
  • Provides power and leverage to easily install, bend, & terminate cables.
  • High-strength steel construction and durable powder coat finish ensure long tool-life.
  • 90° offset dowel orientation allows ease of use in a variety of applications.
  • Pro Handle with Adapter Bar allows left/right cable bends in tight electrical enclosures.

Our Price: $541.32
Huskie Tools MCB40-3 BULLDOG CABLE BENDER PUP 3-PIECE SET (4/0 AWG) BULLDOG CABLE BENDER PUP 3-PIECE SET (4/0 AWG) Huskie Tools MCB40-3

Bending large gauge electrical cables is difficult, especially in tight spaces. Bulldog Bender gives you the power and leverage to easily install, bend, & terminate cables in service panels, LB conduit bodies, switch gear, motor controls, wireways, and meter bases.

  • Four tool sizes cover wide range of cable sizes up to 1000 MCM.
  • Provides power and leverage to easily install, bend, & terminate cables.
  • High-strength steel construction and durable powder coat finish ensure long tool-life.
  • 90° offset dowel orientation allows ease of use in a variety of applications.
  • Pro Handle with Adapter Bar allows left/right cable bends in tight electrical enclosures.

Our Price: $334.12
Huskie Tools MCB500-3 BULLDOG CABLE BENDER PUP 3-PIECE SET (500 MCM) BULLDOG CABLE BENDER PUP 3-PIECE SET (500 MCM) Huskie Tools MCB500-3

Bending large gauge electrical cables is difficult, especially in tight spaces. Bulldog Bender gives you the power and leverage to easily install, bend, & terminate cables in service panels, LB conduit bodies, switch gear, motor controls, wireways, and meter bases.

  • Four tool sizes cover wide range of cable sizes up to 1000 MCM.
  • Provides power and leverage to easily install, bend, & terminate cables.
  • High-strength steel construction and durable powder coat finish ensure long tool-life.
  • 90° offset dowel orientation allows ease of use in a variety of applications.
  • Pro Handle with Adapter Bar allows left/right cable bends in tight electrical enclosures.

Our Price: $426.52
Huskie Tools MCBT1000 BULLDOG CABLE BENDER T-1000 3-PIECE SET (1000 MCM) BULLDOG CABLE BENDER T-1000 3-PIECE SET (1000 MCM) Huskie Tools MCBT1000

Bending large gauge electrical cables is difficult, especially in tight spaces. Bulldog Bender gives you the power and leverage to easily install, bend, & terminate cables in service panels, LB conduit bodies, switch gear, motor controls, wireways, and meter bases.

  • Four tool sizes cover wide range of cable sizes up to 1000 MCM.
  • Provides power and leverage to easily install, bend, & terminate cables.
  • High-strength steel construction and durable powder coat finish ensure long tool-life.
  • 90° offset dowel orientation allows ease of use in a variety of applications.
  • Pro Handle with Adapter Bar allows left/right cable bends in tight electrical enclosures.

Our Price: $726.12
Cable Feeding  Sheave 2" Current Tools 520FS Cable Feeding Sheave 2" Current 520FS

Current Tools 520FS Cable Feeding Sheave 2"
Tube designed to fit into standard sizes of all types of conduit.

  • Tube designed to fit into standard sizes of all types of conduit
  • Tube is split for easy removal of cable after installation
  • 5” wide aluminum sheaves with self-lubricating bearings
  • For feeding & pulling of cable into conduit

Our Price: $376.73
Condux 08617215  Cable Feeding Sheave 1 1/2" Cable Feeding Sheave 1 1/2" Condux 08617215

Condux 08617215 Cable Feeding Sheave plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 1.04"
Slot Length 5"
I.D Tube Width 1.25"
O.D. Tube Width 1.44"
Load Capacity 1500 Lbs

Condux 08617312 Cable Feeding Sheave 1-1/4" Cable Feeding Sheave 1-1/4" Condux 08617312

Condux 08617312 Cable Feeding Sheave plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 0.88"
Slot Length 5"
I.D Tube Width 1.06"-1.19"
Load capacity 1500"


Condux 08617220  Cable Feeding Sheave 2" Cable Feeding Sheave 2" Condux 08617220

Condux 08617220 Cable Feeding Sheave plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 1.38"
Slot Length 6"
I.D Tube Width 1.75"-1.95"
Load capacity 2600"


Condux 08617230 Cable Feeding Sheave 3" Cable Feeding Sheave 3" Condux 08617230

Condux 08617230 Cable Feeding Sheave plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 2.25"
Slot Length 12"
I.D Tube Width 2.62"
O.D Tube Width 2.95"
Load capacity 4800"


Cable Feeding Sheave 3" Current Tools 530FS Cable Feeding Sheave 3" Current 530FS

Current Tools 530FS Cable Feeding Sheave 3"
Tube designed to fit into standard sizes of all types of conduit.

  • Tube is split for easy removal of cable after installation
  • 5” wide aluminum sheaves with self-lubricating bearings
  • For feeding & pulling of cable into conduit

Our Price: $480.15
Condux 08617230 Cable Feeding Sheave 3" Cable Feeding Sheave 3" Fits sch 80 Pipe Condux 08617270

Condux 08617270 Cable Feeding Sheave Fits sch 80 Pipe plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 2.24"
Slot Length 12"
I.D Tube Width 2.50"
O.D Tube Width 2.78"
Load capacity 4800"


Condux 08617200 Cable Feeding Sheave 4" Cable Feeding Sheave 4" Condux 08617200

Condux 08617200 Cable Feeding Sheave plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 3.00"
Slot Length 12"
I.D Tube Width 3.50"
O.D Tube Width 3.95"
Load capacity 6500"


Cable Feeding Sheave 4" Current Tools 540FS Cable Feeding Sheave 4" Current 540FS

Current Tools 540FS Cable Feeding Sheave 4"
Tube designed to fit into standard sizes of all types of conduit.

  • Tube is split for easy removal of cable after installation
  • 5” wide aluminum sheaves with self-lubricating bearings
  • For feeding & pulling of cable into conduit

Our Price: $568.79
Condux 08617340 Cable Feeding Sheave 4" Fits sch 80 Pipe Cable Feeding Sheave 4" Fits sch 80 Pipe Condux 08617340

Condux 08617340 Cable Feeding Sheave Fits sch 80 Pipe plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 3.00"
Slot Length 12"
I.D Tube Width 3.25"
O.D Tube Width 3.65"
Load capacity 6500"


Condux 08617250 Cable Feeding Sheave 5" Cable Feeding Sheave 5" Condux 08617250

Condux 08617250 Cable Feeding Sheave plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 3.75"
Slot Length 14"
I.D Tube Width 4.50"
O.D. Tube Width 4.90"
Load Capacity 6500 Lbs

Current Tools 550FS Cable Feeding Sheave 5" Cable Feeding Sheave 5" Current 550FS

Cable Feeding Sheave

  • Feeding sheave for 5” conduit
  • Tube designed to fit into standard sizes of all types of conduit
  • Tube is split for easy removal of cable after installation
  • 5″ wide aluminum sheaves with self-lubricating bearings
  • For feeding & pulling of cable into conduit

Our Price: $644.14
Cable Feeding Sheave 5" Duct Schedule 40 GMP 70567 Cable Feeding Sheave 5" Duct Schedule 40 GMP 70567

The GMP 70567 Cable Feeding Sheave, for the 5" Duct Schedule 40, slides into the end of conduit in a manhole wall, allowing the cable being fed into the conduit to roll smoothly over sheave from all angles. It has a frame that is composed of steel for durability while the sheave is made from aluminum alloy with self lubricating bearings. The sheave has split tube for easy convenient removal after cable is installed.

Our Price: $742.55
Condux 08617360 Cable Feeding Sheave 6" Fits sch 80 Pipe Cable Feeding Sheave 6" Fits sch 80 Pipe Condux 08617360

Condux 08617360 Cable Feeding Sheave Fits sch 80 Pipe plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 4.50"
Slot Length 14"
I.D Tube Width 5.00"
O.D Tube Width 5.56"
Load capacity 6500"


GMP 70570 Cable Feeding Sheave for 3" Duct Schedule 80 Cable Feeding Sheave for 3" Duct Schedule 80 GMP 70570

The GMP 70570 Cable Feeding Sheave, for the 3" duct schedule 80, slides into the end of conduit in a manhole wall, allowing the cable being fed into the conduit to roll smoothly over sheave from all angles. It has a frame made of steel for durability while the sheave is made from aluminum alloy with self lubricating bearings.The sheave has a split tube for easy convenient removal after cable is installed. * GMP 70570 ONLY

Our Price: $598.03
GMP 70565 Cable Feeding Sheave for 4" Duct Schedule 40 Cable Feeding Sheave for 4" Duct Schedule 40 GMP 70565

The GMP 70565 Cable Feeding Sheave, for the 4" duct schedule 40, slides into the end of conduit in a manhole wall, allowing the cable being fed into the conduit to roll smoothly over sheave from all angles. It has a frame made of steel for durability while the sheave is made from aluminum alloy with self lubricating bearings.The sheave has a split tube for easy convenient removal after cable is installed.

Our Price: $666.65
Cable Sheave Shackle 4"  GMP 71644 Cable Sheave Shackle 4" GMP 71644

These shackles are used to support a 4" cable sheave or quadrant block in a manhole equipped with pulling-in irons. 10,000 lbs. maximum rated load

Our Price: $668.80
GMP71724 Cable Sheave Wheel 4 X 26.5" Cable Sheave Wheel 4 X 26.5" GMP71724

These units are available in 11 in. (280 mm), 20 in. (510 mm) and 26 1/2 in. (675mm) dia., and are used with 3 in. (76mm), 4 in. (102mm), or 5 in. (130mm) cables

Our Price: $959.33
GMP 86570 Cable Shoe CABLE BENDING SHOE Cable Shoe CABLE BENDING SHOE 3" GMP 86570

Cable Shoe CABLE BENDING SHOE Help protect cables from sharp edges in and around manholes and conduit systems. Available in 2 sizes; 3" and 3.5". Made of cadmium plated, 13 gauge steel with a protective polymer coating to extend the life. Each shoe has a tieoff hole at either end for increasing stability during the pulling of cables through it. The trough like steel section is bent into a 75 degree arc with an extended end for easier insertion into duct.

Our Price: $19.95
GMP 86571 Cable Shoe CABLE BENDING SHOE 3.5" Cable Shoe CABLE BENDING SHOE 3.5" GMP 86571

Cable Shoe CABLE BENDING SHOE Help protect cables from sharp edges in and around manholes and conduit systems. Available in 2 sizes; 3" and 3.5". Made of cadmium plated, 13 gauge steel with a protective polymer coating to extend the life. Each shoe has a tieoff hole at either end for increasing stability during the pulling of cables through it. The trough like steel section is bent into a 75 degree arc with an extended end for easier insertion into duct.

Our Price: $23.23
Condux 08066301 Cain Double Hook  4" Cain Double Hook 4' Condux 08066301

4' (1.2 m) Chain, Double Hook, 3/8" (9 mm) Alloy Links. 7,100 (31,581 N) capacity

Used to tie off cable guides in the manhole. Not to be used for overhead lifting.

Condux 08066300 Cain Double Hook  8' Cain Double Hook 8' Condux 08066300

8' (2.4 m) Chain, Double Hook, 3/8" (9 mm) Alloy Links. 7,100 (31,581 N) capacity

Used to tie off cable guides in the manhole. Not to be used for overhead lifting.

Cable Bending Shoe I.D 3.19/O.D 3 Condux 08042100 Condux 08042100 Cable Bending Shoe

Condux 08042100 Cable Bending Shoe I.D 3.19/O.D 3.44

Protects cable from corner abrasion during pulling operations. Rugged, high-impact plastic.

Our Price: $21.67
Condux 08097000 Jamb Skid Base w/ Locking Pins Condux 08097000 Jamb Skid Base w/ Locking Pins

The Condux Jamb Skid is a device for supporting sheaves or quadrant blocks inside a manhole to pull cable into underground conduit.

By positioning the top of the jamb skid against the underside of the manhole opening, and using the camlock foot pedal, set-up can be done in a fraction of the time it takes to install a hanging sheave assembly. Pulling tension actually increases the stability of the Jamb Skid during the pull. No dangerous breakage of chains or straps. The Jamb Skid is especially useful when there are no pulling-in irons available, or when the existing irons do not align correctly with the duct opening. The Jamb Skid can be placed anywhere within a 360 radius inside the manhole.

Constructed of solid aluminum, the Jamb Skid is both strong and lightweight. In most instances it can be installed by one person. The complete unit is created by combining a base unit with one of several extension units, depending upon the height required. Locking 11/4" (32 mm) pins, allow the height adjustment of the Jamb Skid. Also, the width adjusts from 7" (178 mm) to 11"" (279 mm) to accept all Condux sheave assemblies up through 8" (203 mm).

Condux 08097001 Jamb Skid 63-80" Extension Condux 08097001 Jamb Skid 63-80" Extension

The Condux Jamb Skid is a device for supporting sheaves or quadrant blocks inside a manhole to pull cable into underground conduit.

By positioning the top of the jamb skid against the underside of the manhole opening, and using the camlock foot pedal, set-up can be done in a fraction of the time it takes to install a hanging sheave assembly. Pulling tension actually increases the stability of the Jamb Skid during the pull. No dangerous breakage of chains or straps. The Jamb Skid is especially useful when there are no pulling-in irons available, or when the existing irons do not align correctly with the duct opening. The Jamb Skid can be placed anywhere within a 360 radius inside the manhole.

Constructed of solid aluminum, the Jamb Skid is both strong and lightweight. In most instances it can be installed by one person. The complete unit is created by combining a base unit with one of several extension units, depending upon the height required. Locking 11/4" (32 mm) pins, allow the height adjustment of the Jamb Skid. Also, the width adjusts from 7" (178 mm) to 11"" (279 mm) to accept all Condux sheave assemblies up through 8" (203 mm).

Condux 08097002 Jamb Skid 78-109" Extension Condux 08097002 Jamb Skid 78-109" Extension

The Condux Jamb Skid is a device for supporting sheaves or quadrant blocks inside a manhole to pull cable into underground conduit.

By positioning the top of the jamb skid against the underside of the manhole opening, and using the camlock foot pedal, set-up can be done in a fraction of the time it takes to install a hanging sheave assembly. Pulling tension actually increases the stability of the Jamb Skid during the pull. No dangerous breakage of chains or straps. The Jamb Skid is especially useful when there are no pulling-in irons available, or when the existing irons do not align correctly with the duct opening. The Jamb Skid can be placed anywhere within a 360 radius inside the manhole.

Constructed of solid aluminum, the Jamb Skid is both strong and lightweight. In most instances it can be installed by one person. The complete unit is created by combining a base unit with one of several extension units, depending upon the height required. Locking 11/4" (32 mm) pins, allow the height adjustment of the Jamb Skid. Also, the width adjusts from 7" (178 mm) to 11"" (279 mm) to accept all Condux sheave assemblies up through 8" (203 mm).

Condux 08097003 Jamb Skid 107-138" Extension Condux 08097003 Jamb Skid 107-138" Extension

The Condux Jamb Skid is a device for supporting sheaves or quadrant blocks inside a manhole to pull cable into underground conduit.

By positioning the top of the jamb skid against the underside of the manhole opening, and using the camlock foot pedal, set-up can be done in a fraction of the time it takes to install a hanging sheave assembly. Pulling tension actually increases the stability of the Jamb Skid during the pull. No dangerous breakage of chains or straps. The Jamb Skid is especially useful when there are no pulling-in irons available, or when the existing irons do not align correctly with the duct opening. The Jamb Skid can be placed anywhere within a 360 radius inside the manhole.

Constructed of solid aluminum, the Jamb Skid is both strong and lightweight. In most instances it can be installed by one person. The complete unit is created by combining a base unit with one of several extension units, depending upon the height required. Locking 11/4" (32 mm) pins, allow the height adjustment of the Jamb Skid. Also, the width adjusts from 7" (178 mm) to 11"" (279 mm) to accept all Condux sheave assemblies up through 8" (203 mm).

CONDUX 5 x 11 08042800 Heavy Duty Hanger Sheave CONDUX 5 x 11 08042800 Heavy Duty Hanger Sheave

Tie off in the manhole to guide cable into the duct. 12,000 lbs. (53,378 N) cable tension load capacity. Includes light duty arm which conveniently stores inside the heavy duty arm when not in use. Also may be used with alignment arm for cable removal (5" sheaves only). Alignment arm sold separately. Sheave Size: 5 x 11

CONDUX 5 x 20 08042810 Heavy Duty Hanger Sheave CONDUX 5 x 20 08042810 Heavy Duty Hanger Sheave

Tie off in the manhole to guide cable into the duct. 12,000 lbs. (53,378 N) cable tension load capacity. Includes light duty arm which conveniently stores inside the heavy duty arm when not in use. Also may be used with alignment arm for cable removal (5" sheaves only). Alignment arm sold separately. Sheave Size: 5 x 20"

CONDUX 5 x 26.5 08042820 Heavy Duty Hanger Sheave CONDUX 5 x 26.5 08042820 Heavy Duty Hanger Sheave

Tie off in the manhole to guide cable into the duct. 12,000 lbs. (53,378 N) cable tension load capacity. Includes light duty arm which conveniently stores inside the heavy duty arm when not in use. Also may be used with alignment arm for cable removal (5" sheaves only). Alignment arm sold separately. Sheave Size: 5 x 26.5

CONDUX 6 x 11 08042830 Heavy Duty Hanger Sheave CONDUX 6 x 11 08042830 Heavy Duty Hanger Sheave

Tie off in the manhole to guide cable into the duct. 12,000 lbs. (53,378 N) cable tension load capacity. Includes light duty arm which conveniently stores inside the heavy duty arm when not in use. Also may be used with alignment arm for cable removal (5" sheaves only). Alignment arm sold separately. Sheave Size: 6 x 11

Corner Cable Guide 4" Condux 08043100 Corner Cable Guide 4" Condux 08043100

Condux 080432100 Corner Cable Guide for pulling cable into manhole.

Aluminum and Nylatron
® sheaves for pulling cable into manholes. 5,000 lbs. (22,240 N) cable tension load capacity.

Corner Cable Guide 5" Condux 08043200 Corner Cable Guide 5" Condux 08043200

Condux 08043200 Corner Cable Guide for pulling cable into manhole.

Aluminum and Nylatron
® sheaves for pulling cable into manholes. 5,000 lbs. (22,240 N) cable tension load capacity.

Corner Cable Guide 8" Condux 08088800 Corner Cable Guide 8" Condux 08088800

Condux 08088800 Corner Cable Guide for pulling cable into manhole.

  • Maximum Cable Diameter: 8.25"
  • Maximum Working Load: 5,000 lbs.
  • Aluminum and Nylatron Cable Sheaves compatible
  • Replacement Sheave/Rollers: 08087911 8 x 11"
*Condux 08091440 Support Bar not included

Condux 08097040 Diameter Jamb Skid Pin 1-1/4" Diameter Jamb Skid Pin 1-1/4" Condux 08097040

The Condux Jamb Skid is a device for supporting sheaves or quadrant blocks inside a manhole to pull cable into underground conduit.

By positioning the top of the jamb skid against the underside of the manhole opening, and using the camlock foot pedal, set-up can be done in a fraction of the time it takes to install a hanging sheave assembly. Pulling tension actually increases the stability of the Jamb Skid during the pull. No dangerous breakage of chains or straps. The Jamb Skid is especially useful when there are no pulling-in irons available, or when the existing irons do not align correctly with the duct opening. The Jamb Skid can be placed anywhere within a 360 radius inside the manhole.

Constructed of solid aluminum, the Jamb Skid is both strong and lightweight. In most instances it can be installed by one person. The complete unit is created by combining a base unit with one of several extension units, depending upon the height required. Locking 11/4" (32 mm) pins, allow the height adjustment of the Jamb Skid. Also, the width adjusts from 7" (178 mm) to 11"" (279 mm) to accept all Condux sheave assemblies up through 8" (203 mm).

EZ Sheave™ Hook Type Sheaves 18" 4000Lbs  Current 418EZ EZ Sheave™ Hook Type Sheaves 18" 4000Lbs Current 418EZ

Current Tools 418 EZ Sheave™ Hook Type Sheaves 18" 4000Lbs
Wide opening with swing away connector bar allows unloading of cable without having to disassemble the hook sheave.

• 4,000 lb. capacity
• Forged steel hooks with 1" opening.
• 5" wide aluminum sheaves with self-lubricating bearings
• Sizes include 12", 18" and 24" diameter sheaves
• Flat base allows EZ Sheave™ sheaves to stand up for ease of access and storage

Our Price: $737.21
Condux 08539200 Heavy Duty Quadrant Block 5" Heavy Duty Quadrant Block 5" Condux 08539200

Protects fiber optic cable during installation. Pulling radius of 26" (660 mm); 13 aluminum rollers on bronze bearings allow cable to make a gradual 90° turn for easy pulling through manhole opening. Lightweight, corrosion-resistant aluminum side plates. Can be lowered into any manhole opening and chained in place for good alignment or used as a cable guide at street level. Support bar sold separately.
USED

Hook Type Sheave 12" 4000Lbs Current Tools 412 Hook Type Sheave 12" 4000Lbs Current Tools 412

Current Tools 412 Hook Type Sheave 12" 4000Lbs

  • 4,000 lb. capacity
  • Forged steel hooks with 1’’ opening
  • Welded steel frames
  • 5” wide aluminum sheaves with self-lubricating bearings

Our Price: $353.09
Current 812 Heavy duty Hook type Sheave ​12" Bull Wheel 8000 LB Hook type Sheave 12" Bull Wheel 8000 LB Current 812

Current Tools 812 Hook type Sheave 12" Bull Wheel 8000 LB

  • Forged steel hooks with 1 3/8” opening
  • Heavy duty welded steel frame
  • Self lubricating bearings

Our Price: $422.53
Hook Type Sheave 24", 4000 lbs. Current Tools 424 Hook Type Sheave 24", 4000 lbs. Current Tools 424

Current Tools 424 Hook Type Sheave 24", 4000 lbs.

  • 24” diameter hook sheave
  • 4000# Capacity
  • Forged steel hooks with 1″ opening
  • Welded steel frames
  • 5″ wide aluminum Sheaves with self-lubricating bearings

Our Price: $685.84
Hook Type Sheave 6", 4000 lbs. Current Tools 406 Hook Type Sheave 6", 4000 lbs. Current Tools 406

Current Tools 406 Hook Type Sheave 6", 4000 lbs.

  • Sheave Diameter: 6"
  • Sheave Pin: 406 - 362
  • Spring Clip: 406-3
  • Yoke Frame: 406-90
  • Max. Capacity: 4000 Lbs.
  • Forged steel hooks with 1" opening
  • Welded steel frames
  • 5" wide aluminum sheaves with self-lubricating bearings

Our Price: $242.29
Condux 08042420 Hooked Hanger Sheave 4 X 20", 10K Rating Hooked Hanger Sheave 4 X 20", 10K Rating Condux 08042420

Condux 08042420 Hooked Hanger Sheave 4 X 20, 10K Rating
Tie off in the manhole to guide cable into the duct. Also used with alignment arm for cable removal. Hinged yoke for easy cable installation and removal. 10,000 lbs. (44,480 N) cable tension load capacity. Alignment arm sold separately.
Specification:

  • Steel welded frame
  • Nylon cable protectors
  • Cast aluminum sheaves
  • Forged hook with 1./12" opening
  • Width: 4.75" (120 mm)
  • Maximum Cable Diameter: 4" (102 mm)
  • Minimum Bending Radius: 8.5" (215 mm)
  • Shaft: 1.25" (32 mm)
  • Sheave Diameter: 20" (508 mm)
  • Maximum Tension LB: 1,000 lbs. (44,480 N)
  • Material: Aluminum

Our Price: $1,663.78
Manhole Sheave  4" GMP 70284 Manhole Sheave 4" GMP 70284

GMP 70284 4" Manhole sheave The manhole sheave or "Pittsburgh" is used to guide pulling line or cable over the manhole edge when placing and removing cable in manholes which are equipped with pulling in irons to support a sheave and a shackle assembly. Also called a Lip roller

Our Price: $1,569.81
Mini Corner Cable Guide w/o Hook CONDUX 08045010 Mini Corner Cable Guide w/o Hook CONDUX 08045010

Features two hardened steel rollers that guide steel winch line over sharp edges. It is small but sturdy, allowing for easy handling and set-up along with heavy duty capacities. 10,000 lbs. (44,480 N) cable tension load capacity. Replacement Sheaves available, contact factory for information.

Condux 08617415  Nylatron® Cable Feeding Sheave 1-1/2" Nylatron® Cable Feeding Sheave 1-1/2" Condux 08617415

Condux 08617415 Nylatron® Cable Feeding Sheave plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 1.04"
Slot Length 5"
I.D Tube Width 1.25"
O.D. Tube Width 1.44"
Load Capacity 1500 Lbs

Condux 08617420  Nylatron® Cable Feeding Sheave 2" Nylatron® Cable Feeding Sheave 2" Condux 08617420

Condux 08617420 Cable Feeding Sheave plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 1.38"
Slot Length 6"
I.D Tube Width 1.75"-1.95"
Load capacity 2600"


Condux 08617430 Nylatron® Cable Feeding Sheave 3" Nylatron® Cable Feeding Sheave 3" Condux 08617430

Condux 08617430 Nylatron® Cable Feeding Sheave plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 2.25"
Slot Length 12"
I.D Tube Width 2.62"
O.D Tube Width 2.95"
Load capacity 4800"


Condux 08617440 Nylatron® Cable Feeding Sheave 4" Nylatron® Cable Feeding Sheave 4" Condux 08617440

Nylatron® Condux 08617440 Cable Feeding Sheave plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 3.00"
Slot Length 12"
I.D Tube Width 3.50"
O.D Tube Width 3.95"
Load capacity 6500"


GMP 71717 Replacement Sheave Pin 1-5/16 X 5" for Jamb Skid Replacement Sheave Pin 1-5/16 X 5" for Jamb Skid GMP 71717

GMP 71717, Replacement Sheave Pin to lock the jamb skid height and secure sheave or quadrant block.
The 70640 Jamb Skid is used to support quadrant block and sheave when pulling cable through underground conduit.
Sheave Pin Diameter: 1-5/16 X 16"(33mm)

Our Price: $79.71
Right Angle Twin Yoke Sheave 50lbs​ Current Tools 4424 Right Angle Twin Yoke Sheave 50lbs Current 4424

Current Tools 4424 Right Angle Twin Yoke Sheave 50lbs

  • 4,000 lbs. Capacity
  • Forged steel hooks with 1’’ opening
  • Yokes rotate independently for various setups
  • Welded steel yoke frames
  • 5” wide aluminum sheave with self lubricating bearings

Our Price: $772.67
Slingco ZGP8209 Edge Mount Manhole Lead-In Cable Laying Roller (HEAVY DUTY) Slingco ZGP8209 Edge Mount Manhole Lead-In Cable Laying Roller (HEAVY DUTY)

The manhole cable roller leads the cable from the drum into the jointbox/manhole or the winch bond out of the manhole.
* The Diablo Rollers can be substituted with a heavy gauge 89mm tubular Steel Roller fitted oil impregnated maintenance free bushes for use with the heavier cables.

Features and benefits

  • Heavy duty tubular steel construction
  • Suitable for cables up to 130mm
  • 3 x 110mm diameter steel roller* fitted with sealed precision roller bearings
  • Zinc plated
  • Weight: 10 Kg

Our Price: $286.00
Condux 08091440  Support Bar  1-1/4" X 4' Support Bar 1-1/4" X 4' Condux 08091440

Condux 08091440, Support bar is used to support quadrant blocks or cable guides at street level.

  • 1-1/4"(32mm) X 4'(1.2m)
*Support Bar ONLY

GMP 71560 Underground Fiber Optic Sheave 24" & Shackle Assembly Underground Fiber Optic Sheave 24" & Shackle Assembly GMP 71560

GMP 71560 Underground Fiber Optic Sheave 24" & Shackle Assembly
Underground 24 in. fiber optic sheave and shackle assembly - working load 2,000 lbs. Designed to accommodate the special handling needs of pulling fiber optic cable. Among the unique needs of pulling fiber optic cable. Among the unique features are a lightweight design, one size shackle and the reduction of loose parts.

Our Price: $1,212.67
   
 
1