All Thread Rod 3/4 inches X 12 feet,hot dipped galvanized. ASTM A307 Grade B

All thread rod, commonly referred to as fully threaded rod, redi-rod, continuously threaded rod, TFL rod, and abbreviated ATR is used for general purpose fastening for anything from an anchor bolt to a through bolt. A variety of grades and materials are available.

" Must Ship LTL Freight"

-Due to the 10 ft length, this must ship LTL Freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.

All Thread Rod 5/8 inches X 12 feet,hot dipped galvanized. ASTM A307 Grade B

All thread rod, commonly referred to as fully threaded rod, redi-rod, continuously threaded rod, TFL rod, and abbreviated ATR is used for general purpose fastening for anything from an anchor bolt to a through bolt. A variety of grades and materials are available.

" Must Ship LTL Freight"

-Due to the 10 ft length, this must ship LTL Freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.

Used to secure two cable suspension clamps at opposite sides of utility pole.

• Collars are forged instead of welded for extra strength.
• Bolt provided with cone point at each end to ease starting.
• Hot dip galvanized to meet ASTM Specification F2329.
• Manufacturers mark (ABI) and tensile load designation mark (i.e.10M, 16M, 25M) appear on the unthreaded section of each bolt. ABI marking is registered with the U.S Patent Office per the Fastner Insignia Act.
• Minimum tensile strength: 13,550 lbf.
• Recommended torque value: 73 ft lb.
• Unthreaded section is 6".

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts. Length dimensions do not include the points.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts. Length dimensions do not include the points.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.

Double-Arming Bolt 3/4" x 10"
Washer Head Lag Studs are used for light-duty mounting of cable hangers and cable suspension clamps. Stud end is manufactured with a forged square washer head and a roll threaded stud with assembled square nut. Lag end has sharp rolled gimlet threads and a cone point.

All Threaded Rod 3/4 inches X 10 feet, electroplated allthread rod.

All Threaded Rod 3/4 inches X 10 feet,hot dipped galvanized.

Power-Strut Continuous thread rod in electro-galvanized finish is made of steel that offers strength and durability.
It measures 3/8 Inch diameter x 10 ft.
Sold Per Foot.

All Thread Rod 5/8 inches X 10 feet,hot dipped galvanized.

Power-Strut Continuous thread rod in electro-plated finish is made of steel that offers strength and durability.
It measures 5/8 Inch diameter x 10 ft.
sold per 10' stick