Tools-Hardware-Supplies

Rentals





You are here: Home > GMP Lashers & Tools > Duct Rodders
Sort By:
Page of 1
Splice Repair Kit GMP 89411
Splice Repair Kit 1/4 GMP 89411
Our Price: $15.90

These kits come complete with the everyday essentials you'll need for your rodding. Easily attached to the frame with UV treated tie wraps, the canvas pouch has plenty of room to store your accessories and keeps with the rodder where they belong.  Comes with the Male End Fitting Repair
Splice Repair Kit GMP 89413
Splice Repair Kit 3/8 or 1/2 GMP 89413
Our Price: $19.90

These kits come complete with the everyday essentials you'll need for your rodding. Easily attached to the frame with UV treated tie wraps, the canvas pouch has plenty of room to store your accessories and keeps with the rodder where they belong.  Comes with the Male End Fitting Repair.
Splice Repair Kit 1/2 GMP 89415
Splice Repair Kit 1/2 GMP 89415
Our Price: $20.75

These kits come complete with the everyday essentials you'll need for your rodding. Easily attached to the frame with UV treated tie wraps, the canvas pouch has plenty of room to store your accessories and keeps with the rodder where they belong.  Comes with the Female End Fitting Repair
Splice Repair Kit GMP 89417
Splice Repair Kit 1/4 Rod GMP 89417
Our Price: $44.00

These kits come complete with the everyday essentials you'll need for your rodding. Easily attached to the frame with UV treated tie wraps, the canvas pouch has plenty of room to store your accessories and keeps with the rodder where they belong. Comes with the Splice Repair Kit.
Duct Rodder  1/4" x 300 GMP 89206
Duct Rodder 1/4" x 300 GMP 89206
Our Price: $407.14

GMP 1/4" x 300 1/4in (12mm) x 300ft (91m). Weight 171lbs (8 kgs) standard unmarked continuous duct rodders are used to pull or push lines or cables through ducts, tubes or conduits. Gmp's duct rodders are light weight, durable and corrosion resistant. They are coated with a tough UV stabilized safety orange polypropylene and are not affected by water.
Continuous Duct Rodder 1/4 x 400 Unmarked 89208
Continuous Duct Rodder 1/4 x 400 Unmarked 89208
Our Price: $453.00

When loaded onto our durable yet maneuverable dispenser/carriers these duct rodders are fundamentally essential tools for underground task such as cleaning and locating ducts, threading lines or pulling cables. Rodders come with a male threaded end fitting and tapered head on the leading end and a femalethreaded fitting on the backend.
Duct Rodder  1/4" x 500 GMP 89210
Continuous Duct Rodder 1/4" x 500 GMP 89210
Our Price: $494.00

GMP 89210. 1/4in (6.7mm) x 500ft (152m). Weight: 21lbs standard unmarked continuous duct rodders are used to pull or push lines or cables through ducts, tubes or conduits. Gmp's duct rodders are light weight, durable and corrosion resistant. They are coated with a tough UV stabilized safety orange polypropylene and are not affected by water.
Tonable Duct Rodder  3/8" x 600' GMP 89230
Tonable Duct Rodder 3/8" x 600' GMP 89230
Our Price: $1,025.00

The GMP toneable duct rodders are available in 3/8" and 1/2" diameter. Detectable duct rods are used to find, follow and accurately map the duct route without digging or trenching. The traceable duct rod is used in conjunction with bith a single transmitter and a receiver. The easily identifiable signal is transmitted along the entire length of the duct rod.
Continuous Duct Rodder 1/2" x 1000'  89268
Continuous Duct Rodder 1/2" x 1000' 89268
Our Price: $1,705.00

When loaded onto our durable yet maneurable dispenser/carriers these duct rodders are fundamentally essential tools for underground task such as cleaning and locating ducts, threading lines or pulling cables.
Tonable Duct Rodder  1/2" x 1000' GMP 88268
Tonable Duct Rodder 1/2" x 1000' GMP 88268
Our Price: $1,750.00

The GMP toneable duct rodders are available in 3/8" and 1/2" diameter. Detectable duct rods are used to find, follow and accurately map the duct route without digging or trenching. The traceable duct rod is used in conjunction with both a signal transmitter and a receiver. The easily identifiable signal is transmitted and a receiver. The easily transmitter signal identifiable signal is transmitted along the entire length of the duct rod.
Powered Duct Rod Pusher GMP 89004
Our Price: $19,750.00

*  Hydraulically powers GMP 1/2 Duct Rodders in to and out of conduits.
   * Pushes and pulls with forces up to 300 lbs.
   * Rod speeds up to 130/min (40 meters/min)
   * Accurately measures footage and speed with an electronic monitoring system that works in either direction. The readout can be scaled to feet or meters.
   * When pulling back, the fiberglass rod is placed directly back onto the cassette.
   * Features rod access areas for wiping the rod clean during the pull back operation.  Also comes with a package of rod wiper pads (GMP #32290)
   * Duct Clamp on the machine, and the specially designed Duct Mounting
     Clamp Assembly (GMP #32221) provided on the rodder cassette, help stabilize both pieces of equipment during use.
   * Comes with a gasoline driven power pack and hoses.
   * Pusher is mounted on a lightweight, brightly painted, tubular-steel frame that can be tilted at a 30-degree angle to the manhole to reduce initial bending of the fiberglass rod.
   * Must order 1/2 Duct Rodder Separately. Also, user must provide length of 1-1/4 innerduct between Rod Pusher and Rodder Cassette, and another length of 1-1/4 innerduct between the pusher and the duct to be rodded.
PART # GMP 89004