Tiiger Cube Pump
*USE WITH TIIGER POLE PULLER*
Full reversing control. The Cube is equipped with a commercial grade gasoline engine for years of trouble free service and all terrain pneumatic tires for easy portability.10" All terrain pneumatic tires for easy portability on most surfaces. 3/4 Inch steel handle for lasting durability and quality. 1 1/2 Gallon hydraulic fluid reservoir, 1" steel tubing frame and a 4 way/ 3 position manual valve with relief.
pole puller, Tiiger hydraulic utility pole puller, pole pulling equipment
ELK RIVER Manhole Retrieval System EZE-Man™ Confined Space Systems ELK 05632
EZE-Man Confined Space System 7' (05632)
Elk River is the field-proven leader in tripod entry and rescue systems. Confined space Entry and Rescue Systems are designed for lowering and lifting personnel into and out of confined spaces where a tripod system is required. This system is Man-Rated to 310 lbs.
Eagle 2 Gas Detector RKI 724-001
One to Six Gas Confined Space Monitor RKI’s Eagle 2 gas detector can simultaneously display measurements from up to six different sensors. The Eagle 2′s range of applications extends past that of just a confined space gas detector for LEL, O2, CO, and H2S with two different PID sensors available, methane elimination, and volume measurements for CH4 or H2 via a thermal conductivity sensor. Special accessories like dilution fittings, float probes, and long sample hoses allow the Eagle 2 to perform specific tasks like tank and transformer testing. gas tester, manhole package, 4 gas tester, gas meter, gas sniffer, gas detection, gas detector.
WINCH PELSUE PH10C
Designed to protect an area 33" x 33", this 42" high guard rail collapses to only 44" square x 4" for....
Elk River Manhole Retrieval System Economy EZE-Man™ 7’ ELK 05612
Economy EZE-Man Confined Space System 7' (05612)
Elk River is the field-proven leader in tripod entry and rescue systems.
Confined space Entry and Rescue Systems are designed for lowering and
lifting personnel into and out of confined spaces where a tripod system
is required. This system is Man-Rated to 310 lbs.
Economy EZE-Man Confined Space Systems Includes:
* Deluxe EZE-Man™Winch 3:1 Ratio
* Tripod Pulley
* Tripod Head Assembly
* Tripod Leg Assembly
* One Auto-lock Carabiner*
* Tote Bag
* Tripod Bag
* Winch Bag
* Harness bag
* Five D-ring Universal® Harness
* Rope Grab with Lanyard
* Nylon Rope Lifeline
* All Snaphooks & carabiners meet new ANSI Z359.1-2007 Standards
TRASH PUMP GX240 QP3TH
QP3TH Trash Pump 7.9HP Honda, GX240 Gas Engine 3" Suction. Gas powered trash pump.
Hoses/Fittings sold seperately.
CONDUX 08030003 Power Dart® Blower
The Condux Power Dart Blower Is a pneumatic rodding system especially suited for long duct runs.
A three-motor system allows you to choose the right speed for your needs.
With all three motors engaged, it will deliver up to 300 cfm (8.5 m3/min) of
air at 3 psi (.2 bar) max. pressure, easily blowing 1⁄2" (13 mm) poly line or
measuring tape over 2,000 feet (610 m) in conduit up to 6 inches (152 mm) in diameter.
Requires a 3,000 watt generator 110 Volt model includes a 30 amp twist plug adapter.
TRASH PUMP GX160 QP2TH
2" Suction, Trash Pump, 211 GPM, 98 ft. MAX Head; Honda GX160
Gas powered Trash Pump
Hoses/fittings sold separately
GX-2012 Gas Sensor RKI GT720-0290-22-F
Comes with Li-ion battery pack/ charger/ AC and DC adapters. Also come with 3' hose and probe..Built around high-quality micro-sensor technology, the GX-2012 is RKI’s smallest personal 5 sensor gas monitor with a built in sample pump. Weighing only 12.3 ounces, two operating modes: Normal (for confined spaces) and Bar Hole. The GX-2012 can monitor the standard confined space gases (LEL combustibles, Oxygen content, Carbon Monoxide, and Hydrogen Sulfide), and it can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability.The GX-2012 can be used for gas line purge testing as well as standard safety testing. gas tester, manhole package, 4 gas tester, gas meter, gas sniffer, gas detection, gas detector.
RKI 72-0290-22-A GX-2012 Gas Sensor Kit
GX-2012, 4 sensor, LEL / O2 / H2S / CO Li-Ion battery pack only with 100-240 VAC charger by RKI Instruments.The RKI GX-2012 is RKI instruments smallest personal 5 sensor gas monitor with a built in sample pump. Comes with 3' hose and probe.
Allegro 9404-05 DC 1.5" Submersible Dewatering/Sludge Pump
This 1.5" submersible, portable, and electrically powered dewatering pump is designed for trouble-free operation in the removal of water from enclosed sumps, irrigation areas or serve a variety of general dewatering/pumping chores. Can operate on any 12 volt truck or automobile battery. Battery clips on the power cord are included for easy connection to the battery. The pump features a 12VDC motor driven impeller pump and the electric motor section that has a high efficiency sealing system that prevents water from entering the motor and also permits initial and temporary dry running. The shafts seal may be damaged with extended dry running. All pumps and hoses feature fire hose-style quick connect 2" fitting, and watertight o-ring seals to keep motor dry.
Model - Submersible
Discharge Bore - 1.5"
Motor Output HP - 1/3
Phase - Single
Total Head (Max.) - 25'
Capacity (Max.) Gal/Min - 43
Max Liquid Temp. - 150DF
Pump RPM - 1750
Rated Current Amps - 30
Length of Cable - 30'
Cord Size - 8/2
Diameter - 10"
Length - 23"
Width - 26"
Height - 19-1/4"
GX-2012 Gas Sensor RKI GT720-0290-22-A
No Charger needed runs on Alkaline batteries. Built around high-quality micro-sensor technology, the GX-2012 is RKI’s smallest personal 5 sensor gas monitor with a built in sample pump. Weighing only 12.3 ounces, two operating modes: Normal (for confined spaces) and Bar Hole. The GX-2012 can monitor the standard confined space gases (LEL combustibles, Oxygen content, Carbon Monoxide, and Hydrogen Sulfide), and it can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability.The GX-2012 can be used for gas line purge testing as well as standard safety testing. gas tester, manhole package, 4 gas tester, gas meter, gas sniffer, gas detection, gas detector.
RKI GTGX KIT X2009 KIT Complete Set Up Kit
Complete Set Up Includes:
(1) RKI GX-2009 along with DC charger & manual: RKI GTGX2009 W/ DC/
(2) Hand Aspirated sample adapter with 10' hose & probe: RKI GT81-1160RK 10'
(3) Case for GX-2009: RKI GT20-0112RK-01CA
Allegro 9401-10 Winch, Guard Rail
This Winch is lightweight, portable, and can be mounted very easily. Both sides are made out of a high density aluminum with a yellow coating to protect it from the elements. The drum, the line spins around is 3 inches thick and is made out of thick steel, making the reel in time much less. The retrieval line used in this system is 36 inches of 1/2 inch x 35 feet Dura-Plex braided rope, which is known for its strength and durability. It has a 300 lbs workload capacity. A 9/16" snap hook (with safety snap design) that can attach to equipment or wrap back around to attach to itself when idle. (Do not use as personnel retrieval device) Allegro 9401 Guard Rail not included*
Condux 5"X11" 4K Single Hooked Hanger Sheave Aluminum
Tie off in manhole to guide cable into and out of duct. 4,000 lbs cable tension load capacity. For less demanding cable pulling applications than Condux 10,000 lbs sheaves, replacement Sheaves available.
Sheave size: 5" X 11"
127 X 279(mm)
Forged hook with 1.12" opening
CONDUX 08030011 Carrier Kit for Power Dart® Blower
A convenient way to order a practical assortment of
carriers and seal-off products for use with the Power Dart Blower or
What's in the box?
Power Dart Blower Seal-Off: 1 1/2"- 2 1/2" (38mm-64mm)
Power Dart Blower Seal-Off: 2 1/2"- 6" (64mm-152mm)
Power Dart Blower Seal-Off Body: 1/2"-6" 64152 (13mm-152mm)
Line Carrier: 2" (51mm)
Line Carrier: 4" (102mm)
Carrier, Chute 2.00 Nylon: 2" (51mm)
Carrier, Chute 3.00 Nylon: 3" (76mm)
Carrier, Chute 4.00 Nylon: 4" (102mm)
Duct Projectile: 2" (51mm)
Duct Projectile: 4" (102mm)
ALLEGRO DC BLOWER 9535-08DC
Featuring an 8" metal blower system with ducting built into a heavy duty polyester bag for all-in-one unit for ease of operation. Designed with zippered ends that allow blower use without removing blower from the bag. Zipper openings allow for plug/cord inlet and outlet. Easy to carry and store. Polypropylene nine blade fan, steel/powder coated housing and grill, carry handle with molded-in 2 speed switch. Ducting: Single-Ply lightweight vinyl/polyester PVC coated. Yellow with black wear-strip and integrated nylon attachment strap on one end. Dimensions: 27"l x 15"w x 12"h
Multiquip 2" Submersible Trash Pump ST2040T
This portable 2-inch (50 mm) submersible pump is best for removing water from confined areas. One of the most popular sizes, the ST2040T can be used in many applications where debris will be found in the water. Great for use in sumps.
Multiquip 2" Submersible Water Pump ST2037
ST2037 2 Inch Discharge, 115V 1Ř, 1.0 HP, 73 GPM, 37' Total Head
This lightweight, compact submersible
centrifugal pump is ideal for moving water in multiple confined and open
area applications. This is a powerful, versatile, low maintenance pump
that is perfect for a wide range of operations supporting Contractors,
Service Utilities, Municipalities, and Homeowners. Further, the ST2037
incorporates a rugged cast aluminum housing, internal thermal overload
protection, dual shaft seals, sealed ball bearings impeller and molded
25’ Power Cable with strain relief.
REQUIRED COMPONENTS SOLD SEPARATELY
- 1.0HP, 115V/9.8A, 1Ř, UL & CUL Listed Electric Motor.
- Built-in Overload Protection.
- 2” (NPT) Female Discharge Port.
- Reliable double mechanical oil-filled seals.
- Cast iron/steel motor casing serves as heat conductor.
- Pumps Liquid Up To 120° F.
- 25’ of molded power cord w/strain relief
Dewaters Flat Surfaces Up To 1/2” Levels.
: 2" M x F NPT HOF 3281-20AALMale Camlock Female Threads - Type A - SHORT SCREW ON ALUMINUM COUPLER
&DISCHARGE HOSE SOLD SEPARATELY Discharge Hose
Condux 08617215 Cable Feeding Sheave 1 1/2"
Condux 08617215 Cable Feeding Sheave plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Slot Width 1.04"
Slot Length 5"
I.D Tube Width 1.25"
O.D. Tube Width 1.44"
Load Capacity 1500 Lbs
Manhole Cover Lifter GMP 70157
This Utility Manhole Cover Lifter allows one tool to remove multiple cover types
It has a Small J-Hook, Medium L-Hook and a Large J-Hook
Condux 080023010 Hand Hole Hole with 7/8" Penta Socket
The Condux Hand Hole Hook lightens the load with its 7/8" penta socket that is applied on a 1/2" socket drive that is conveniently located at the end of the handle bar. which can easily unlock then hook and pull up any conventional man-hole with little effort.
This Hand hook has a 70 lbs workload.
INWESCO 82A63 4 WAY PENTA-SOCKET
Manufactured from 9/16 round steel bar
Zinc plated finish
Has two sizes of penta sockets (85A05 and 85A10)
also Has a standard 12 point 15/16 inch socket (for 5/8 inch hex bolts)
Has a pry blade
Condux 08023012 Hand Hole Hook with 1/2" Socket Drive
This Condux 27" Hand Hole Hook lightens the load with it's 1/2" socket drive conveniently located in the handle, can easily unlock then hook and pull up any conventional man-hole with little effort.This man-hole hook has 70 lbs workload. Hook ONLY.