You are here: Home > Aerial Lineman Tools > Manta Ray Earth Anchor System
We found 37 results matching your criteria.
Sort By:
1
Refurbished Manta Ray Utility Anchor System Manta Ray Utility Anchor System/R

Complete setup to drive a Manta Ray anchor into the ground. When pulled the Manta Ray will lock horizontally into the ground never coming loose. One of the best ways to assemble a down guy.

REFURBISHED USED

Our Price: $13,750.00
MANTA STANLEY GPU 18-8 50382 MANTA STANLEYGPU 18-8 50382 HYDRAULIC POWER PACK

The GT18 hydraulic power unit AKA Hydraulic Power Pack is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both Type 1 and Type 2 hydraulic tools. Its powerful 18 HP Briggs & Stratton engine and best-in-class cooling system deliver the power and heat rejection pros need to keep tools working uninterrupted all day in all types of conditions. The GT18 features a computerized all-electric throttle control system that idles-down the engine when tools aren't running, saving fuel and extending service life. Its feature-rich, dependable operation make the GT18 the workhorse of the industry.



Our Price: $6,642.00
18HP Arnco Power Pack TM351/R 18HP Arnco Power Pack TM351/R

18HP Arnco Power Pack TM351. Can be used with the Manta Ray Utility Anchor System.

REFURBISHED

Our Price: $5,250.00
MANTA HB-90 50364 MANTA HB-90 50364 STANLEY HYDRAULIC JACKHAMMER [1-1/4 inch]

The Stanley BR87 Hydraulic Jack Hammer is a heavy duty tool for work in the 90 pound class and above for 8+" concrete applications. It is highly productive in utility construction, street maintenance, repair of water and gas mains, and general contracting jobs. A feathering on/off valve controls speed, making start up and initial tool placement easy. A diaphragm accumulator provides trouble free operation and will handle system back pressures up to 250 psi (17 bar) Operates on open center systems and is available in 1-1/8 or 1-1/4 inch chuck hex sizes.

Our Price: $3,035.03
Load Locker , Hydraulic Control Valve and Plate LL-150127 MANTA RAY Load Locker KIT 50127, Hydraulic Control Valve and Plate LL-1

  1. The Manta Ray load locker Manta Ray LL-1 is required to load lock and proof test the anchor. It is a double acting hollow hydraulic jack with a base reaction plate and a direct reading gauge. The load locker can be used with the same hydraulic from the line truck used to drive the jack hammer.The base plate is designed for anchors that are installed at an angle to the ground. It has a large bearing surface and a small cross member. For angled guy anchors the two cross members should be placed toward the tower and perpendicular to the axis of the anchor rod. The kit includes the Manta LL-1FPM 50141 (10) Ton Load Locker, Manta LL-3 50134 Base Plate, Manta LL-1FPM Homak 32in. Industrial Steel Storage box ,Manta LL-1ASB 50132 Adapter Load Locker Setting Bar, Manta LL-1TJ 50148 Tapered Jaw set, 5/32 Hex Driver 51188 (For adjustment of the Bypass Valve on LL-1FPM) and Manual.

Our Price: $2,843.00
MANTA LB-1 50093 Kit Complete MANTA LB-1 50093 Kit Complete

Little Beaver The LB-1 kit consist of:

  • HDL-210 Two man handle with 10 cu" displace motor 200 RPM.
  • 9092-M one piece Torque Tube, short.
  • 9054-4X36 Extension, Snap-on, 4X36.
  • 4X42-SSC Auger, Snap-on, Carbide Point.
  • 9093-A Torque Tube Bracket, Wiggle Joint for NPTT, incl. Mounting Bolts.
  • 9027 Point, Standard.
  • 3012-2 Bolt, HEX NC, 3/8 X 1 pltd GR 5.
  • 9027-KEP, Nut, KEP NC, 3/8 pltd. (Nut w/ Lock Washer)
  • 9023-4, Blade, 4 inches.
  • 9024, Bolt Hex NC, 1/4 X 7/8 pltd. GR 5.
  • 9026-KEP, Nut, KEP NC, 1/4 pltd. (Nut w/ Lock Washer)
  • 9023-C4RT, Blade, Carbide 4" Ripper Teeth.

Our Price: $2,438.93
MANTA-LL-2-LOAD-LOCKER MANTA LL-2 LOAD LOCKER

Light Duty Hand Pump.The LL-2 Anchor Locking kit is designed to Load Lock and proof test Small Manta Ray
and Duckbill anchors. It is manually operated and has a maximum capacity of 8000
pounds (36kN). It can accommodate anchors installed vertically or at angle to the
ground. The anchor capacity is easily read on the included gauge. The design of the LL-2
is such that the load on the anchor in pounds is equal to the pressure in psi (pounds per
square inch) as read on the gauge. It includes an accessory kit to allow attachment to
anchors equipped with SAR-58 style anchor rods, AT-16 (1/2 UNC) or AT-12 (3/8
UNC) anchor rods, or cabled anchors. The kit also includes a Rod Clamp and cable sling
accessory to allow gripping of SAR-58 Style anchors below the ends of the threads.

Our Price: $2,075.27
Manta Ray Gadd Set SGC-18 MANTA 50244 SGC 18 Kit 1-1/8" x 6" chuck hammer/breakers SGC-18

The SGC-18 drive steel kit also a GADD set will install the drive Manta Ray Anchors
Kit with 1-1/8" x 6" chuck hammer/breakers SGC-18
Sets are 8' total length: include shank, 3 couplers, 2 extensions, 1 drive tip, gad extractor bar, & carrying bag

Our Price: $1,420.00
Manta Ray Gadd Set SGC-14 MANTA 50243 SGC 14 Kit 1-1/4" x 6" chuck hammer/breakers SGC-14

The SGC-14 drive steel kit also a GADD set will install the drive Manta Ray Anchors.
For 1-1/4" x 6" chuck hammer/breakers
Sets are 8' total length: include shank, 3 couplers, 2 extensions, 1 drive tip, gad extractor bar, & carrying bag


Our Price: $1,420.00
Paving Breaker model 190 -  American Pneumatic Tools American Pneumatic Tools Paving Breaker model 190 1-1/8 Shank

Tough and dependable, the high performance Model 190 Paving Breaker or Jack Hammer is the most powerful tool American Pneumatic Tool makes. 1-1/8 Shank. It is designed for big jobs such as heavy demolition and concrete breaking. Since the Model 190 has the ability to penetrate the hardest concrete it is the choice for road building and foundation removal.The 190 is now equipped with the patented Automatic Ball Valve.

Our Price: $990.67
Paving Breaker model 117 -  American Pneumatic Tools American Pneumatic Tools Paving Breaker model 117 30#

APT 5200 117 30# JACKHAMMER
1X4-1/4" PAVING BREAKER

This 30 lb class Paving Breaker is an ideal tool for light to medium demolition work as well as for use in confined areas. This lightweight tool will break up concrete floors, and can be used in any other type of general demolition work. The M117 is now equipped with the patented Automatic Ball Valve. (Pat. # 8,276,682 B2)

FEATURES:
  • New! Patented Automatic Ball Valve
  • Drop forged steel handle
  • Built-in automatic oiler
  • Replaceable chuck bushing
  • Rubber handle grips
  • Latch type retainer
  • Swivel hose connector with universal coupler
  • Four bolt back head
  • Noise reducing muffler available

Our Price: $874.67
Backfill Tamper - American Pneumatic Tools Backfill Tamper-American Pneumatic Tools

The APT Model 131 Backfill Tamper is used for soil compaction, temporary filling of holes, ashphalt packing etc.

Our Price: $874.67
MANTA LB-4SSC 50102 4 X 42" Auger with CarbideTip replacement MANTA LB-4SSC 50102 4 X 42" Auger with Carbide Tip REPLACEMENT

MANTA LB-4SSC 50102, 4 X 42" Auger with Carbide Tip for HDL-210 Replacement

Our Price: $250.67
Hydraulic Hose EACH  25' With Flush HC16-25 Hydraulic Hose 25' With Flush HC16-25 *EACH*

*MUST BUY TWO*
/Hydraulic Hose EACH 25' nominal size and 25 length w/ HTMA flush face couplers. A maximum 50 ft hose length is recommended. 227.73 EACH. TWO ARE REQUIRED FOR MANTA RAY AND/OR POLE PULLER

Our Price: $236.72
MANTA 50655 SG-4HD HEAVY DUTY COUPLER MANTA 50655 SG-4HD HEAVY DUTY COUPLER

MANTA 50655 SG-4HD HEAVY DUTY COUPLER

Our Price: $183.41
MANTA 50231 SG 14  1-1/4" x 6"  chuck shank /breakers SG-14 MANTA 50231 SG 14 1-1/4" x 6" chuck shank /breakers SG-14


1-1/4" hex x 6" shank,


Our Price: $179.00
MANTA 50232 SG 18  1-1/8" x 6"  chuck shank /breakers SG-18 MANTA 50232 SG 18 1-1/8" x 6" chuck shank /breakers SG-18


1-1/8" hex x 6" shank, 15-1/2" OAL


Our Price: $173.40
MANTA LB 9023-C4RT MANTA LB 9023-C4RT

The Manta LB 9023-C4RT includes a 4" carbide Ripper Teeth blade, 4'' and 5" blade.
Does NOT include tube auger.

Our Price: $147.18
MANTA LB-9054 50117 4 X 36" Auger Snap-On Extension MANTA LB-9054 50117 4 X 36" Auger Snap-On Extension

MANTA LB-9054 50117 4" X 36" Auger Snap-On Extension

Our Price: $133.67
Manta Ray Anchor MRSR ANCHOR H-20229 UT II MRSR ANCHOR

17.25 x 12.5" " 36,000 lbs  Utilimate Strength Anchor Working loads (2-1 safety factor) 20,000 lbs (89Kn). This is anchor is hot dipped galvanized and designed to be used in normal/medium soils. It accepts anchor rods .D-75″ or D100 rods to 1.0″ (25 mm).threads

Our Price: $116.50
3 Inch Butt-American Pneumatic Tools APT-3566 3 Inch Butt-American Pneumatic Tools APT-3566

3" diameter solid

Our Price: $92.72
Half Moon Butt American Pneumatic Tools APT-2655 Half Moon Butt American Pneumatic Tools APT-2655

American Pneumatic tool tampers are available with a choice of three types of butts. This butt is a half moon shaped butt. Applications range from foundation and pavement repair to the installation of power and telephone poles.

Our Price: $90.01
6 Inch Butt - American Pneumatic Tools 6 Inch Butt - American Pneumatic Tools APT-260

6" diameter internally reinforced

Our Price: $87.09
Manta Ray Anchor MR1 Manta Ray Anchor MR1 H-20036-UT-II

*MR1* 7" x 14 1/2" 40,000 lbs (178 Kn) Utilimate Strength Anchor To be used with 7ft 1" D100, 3.5ft 1" D10031, or D75 3/4" 12632 Pisa rods only.Working loads (2-1 safety factor) 20,000 lbs (89Kn). This is anchor is hot dipped galvanized and designed to be used in normal/medium soils. It accepts anchor rods .1″ threads D100 Rod

Our Price: $76.86
Hydraulic Hose EACH  25' With Flush HC16-25 HST 80801002 Female Quick Connect hydraulic fitting

Female Quick Connect Hydraulic Coupler fitting w/ HTMA flush face 3/4 NPT female threads. ONE EACH ARE REQUIRED FOR TIIGER POLE PULLER

Our Price: $68.33
Manta Ray Anchor MR2 Manta Ray Anchor MR2 20199-UT-II-MR2

*MR2* 20199-UT-II-MR2 4" x 14 1/2" 40,000 lbs Manta Ray Anchor(178 Kn) Utilimate Strength Anchor To be used with 7ft 1" D100, 3.5ft 1" D10031, or D75 3/4" 12632 Pisa rods only. Working loads (2-1 safety factor) 20,000 lbs (89Kn). This anchor is hot dipped galvanized and designed to be used exclusively in hard/dense/cobble soils. It accepts anchor rods w/ 1.0″ threads (25 mm D100 Rod

Our Price: $67.50
MANTA 50084 GB-1 Canvas Bag MANTA 50084 GB-1 Canvas Bag

Canvas Bag for the Manta Ray Earth Anchor Drive Set (SGC)

Our Price: $60.00
Manta Ray Anchor MR3 H-20210-UT-II MR-3 Manta Ray Anchor MR3 H-20210-UT-II MR-3

20,000 lbs (89 Kn) Utilimate Strength Anchor Working loads (2-1 safety factor) 10,000 lbs (45 Kn). It is hot dipped galvanized and designed to be used for medium loads in normal/hard soils. It accepts anchor rods .50″ (13 mm) to .75″ (19 mm). Use with D62 5/8 Pisa Rod and J6516 twin eyenut dim:3.5x11.88



Our Price: $46.90
Hydraulic Hose EACH  25' With Flush HC16-25 HST 80801003 Male Quick Connect hydraulic fitting

Male Quick Connect Hydraulic Coupler fitting w/ HTMA flush face 3/4 NPT female threads.ONE EACH ARE REQUIRED FOR TIIGER POLE PULLER

Our Price: $35.83
Manta Ray Anchor MR3 H-20210-UT-II MR-3 Manta Ray Anchor MR4 H-20221-UT-II MR-4

20,000 lbs (89 Kn) Utilimate Strength Anchor Working loads (2-1 safety factor) 10,000 lbs (45 Kn). It is hot dipped galvanized and designed to be used for medium loads in normal/hard soils. It accepts anchor rods .50″ (13 mm) to .75″ (19 mm). Use with D62 5/8 Pisa Rod and J6516 twin eyenut dim:3.5x11.88



Our Price: $31.40
Pisa Anchor  Rod 1" X 7' H-D100 MANTA Pisa Anchor Rod 1" X 7' H-D100

To be used with 7ft 1" D100, 3.5ft 1" D10031, or D75 3/4" 12632 Pisa rods only.
Chance introduced this system of utilizing the power of digging equipment to install screw anchors. The system consists of a screw anchor, anchor rod and a special installing wrench. Each anchor has a galvanized steel threaded anchor rod with an upset hex; single or twin helices and a galvanized guy wire nut which is screwed to the anchor rod end. PISA anchors can be installed in a matter of minutes.

Our Price: $28.04
Pisa Anchor  Rod 1" X 7' H-D100 MANTA Pisa Anchor Rod H-D62 ROD PISA 5/8 X7

Use with Manta Ray MR-3 and MR-4 ONLY. 3/4" threads Chance introduced this system of utilizing the power of digging equipment to install screw anchors. Use with J-6516 Twin Eyenut

The system consists of a screw anchor, anchor rod and a special installing wrench. Each anchor has a galvanized steel threaded anchor rod with an upset hex; single or twin helices and a galvanized guy wire nut which is screwed to the anchor rod end. PISA anchors can be installed in a matter of minutes.

Our Price: $18.40
Anchor Rod Coupler H-D354 "PISA" 3/4" AND 1" RODS Anchor Rod Coupler H-D354 "PISA" 3/4" AND 1" RODS

3/4" & 1" Coupling,Part Number: D 354, Used with D100, D75 & D10031 Rods Only when additional rods must be installed, 36,000 Lbs. Ultimate Tensile Strength, Hot-dip galvanized. POWER INSERTED SCREW Anchor Rod Coupler "PISA", U.S. made versions available

Our Price: $10.04
Anchor Rod Coupler H-352 "PISA" 5/8" Anchor Rod Coupler H-352 "PISA" 5/8"

5/8" Coupling,Part Number: D 352, Used with D-62 5/8" Rod Only when additional rods must be installed 16,000 Lbs. Ultimate Tensile Strength Hot-dip galvanized U.S. made versions available. POWER INSERTED SCREW Anchor Rod COUPLER


Our Price: $9.20
Triple Eye Nut 1" 5043 THIMBLE EYENUT Triple Eye MANTA 1" H-J12585/D6567

Used in conjunction with D100 anchor rods for helical anchors. Eye nuts are forged from strength 1045 steel...

Our Price: $9.10
MANTA RAY ANCHOR TAGS MANTA RAY ANCHOR TAGS

Our Price: $1.43
   
 
1