SEDCATCH Dew S1.5x5
Dewatering Sock - 10 oz. 1.5 ft. x 5 ft PUMPING SOCK
Also known as a sediment sock or pumping sock.
Multiquip 2" Submersible Water Pump ST2037
ST2037 2 Inch Discharge, 115V 1Ø, 1.0 HP, 73 GPM, 37' Total Head
This lightweight, compact submersible
centrifugal pump is ideal for moving water in multiple confined and open
area applications. This is a powerful, versatile, low maintenance pump
that is perfect for a wide range of operations supporting Contractors,
Service Utilities, Municipalities, and Homeowners. Further, the ST2037
incorporates a rugged cast aluminum housing, internal thermal overload
protection, dual shaft seals, sealed ball bearings impeller and molded
25’ Power Cable with strain relief.
REQUIRED COMPONENTS SOLD SEPARATELY
- 1.0HP, 115V/9.8A, 1Ø, UL & CUL Listed Electric Motor.
- Built-in Overload Protection.
- 2” (NPT) Female Discharge Port.
- Reliable double mechanical oil-filled seals.
- Cast iron/steel motor casing serves as heat conductor.
- Pumps Liquid Up To 120° F.
- 25’ of molded power cord w/strain relief
Dewaters Flat Surfaces Up To 1/2” Levels.
: 2" M x F NPT HOF 3281-20AALMale Camlock Female Threads - Type A - SHORT SCREW ON ALUMINUM COUPLER
&DISCHARGE HOSE SOLD SEPARATELY Discharge Hose
Multiquip 2" Submersible Trash Pump ST2040T
This portable 2-inch (50 mm) submersible pump is best for removing water from confined areas. One of the most popular sizes, the ST2040T can be used in many applications where debris will be found in the water. Great for use in sumps.
Allegro 9404-05 DC 1.5" Submersible Dewatering/Sludge Pump
This 1.5" submersible, portable, and electrically powered dewatering pump is designed for trouble-free operation in the removal of water from enclosed sumps, irrigation areas or serve a variety of general dewatering/pumping chores. Can operate on any 12 volt truck or automobile battery. Battery clips on the power cord are included for easy connection to the battery. The pump features a 12VDC motor driven impeller pump and the electric motor section that has a high efficiency sealing system that prevents water from entering the motor and also permits initial and temporary dry running. The shafts seal may be damaged with extended dry running. All pumps and hoses feature fire hose-style quick connect 2" fitting, and watertight o-ring seals to keep motor dry.
Model - Submersible
Discharge Bore - 1.5"
Motor Output HP - 1/3
Phase - Single
Total Head (Max.) - 25'
Capacity (Max.) Gal/Min - 43
Max Liquid Temp. - 150DF
Pump RPM - 1750
Rated Current Amps - 30
Length of Cable - 30'
Cord Size - 8/2
Diameter - 10"
Length - 23"
Width - 26"
Height - 19-1/4"