Toggle mobile menu
FREE! 2018 CALENDAR
The TA54 Tamper is ideal for soil compaction around utility poles, sign and fence posts. It provides 1,600 blows per minute with a long 2-1/2 inch stroke for optimum compaction.The TA54103 furnished with a (3"x8")kidney shoe and an on/off control valve containing -8 SAE O-Ring ports that can be set up with port adapters, couplers, and/or hoses.This model is controlled by the operator at the tool.operating range: 3-9 gpm (26-34 lpm)preasure: 1,000-2,000 PSI
18HP Arnco Power Pack TM351. Can be used with the Manta Ray Utility Anchor System.REFURBISHED
The C-71-5H Earth Drill is the work-horse of the Ground Hog line, tried and tested for over 30 years. Also known as an " Anchor Drill". This is a two man drill. Auger Bits sold separately.
Auger Extension 3' GROU-EX3, Ground Hog offers a large range of augers and accessories for our earthdrills to cover all types of soil conditions and customer requirements.
Ground Hog offers a large range of augers and accessories for our earthdrills to cover all types of soil conditions and customer requirements
Ground Hog Pengo Drill 4" x 3'. Ground Hog offers a large range of augers and accessories for our earthdrills to cover all types of soil conditions and customer requirements.
This is one of the two drive end wrenches for the complete tool system for installing anchors made by A.B. Chance. This bar is 67 pounds and is 7 feet tall. Large Hub Fits 1-1/2 solid & 2.5" socket driveinside dimension 1.54 Outside dimension 2.44
To determine which Kelly Bar Adapter you need first measure your Kelly Bar across the flats for the correct Kelly Bar Adapter size. Then determine the maximum torque possible from the Digger motor to choose the correct Kelly Bar Adapter.Two torque ratings are available,10,000 and 15,000 ft-lbs.
This is one of the two drive end wrenches for the complete tool system for installing anchors made by A.B. Chance. This bar is 57 pounds and is 7 feet tall. Standard Drive-End Wrench installs 8,000 ft.-lb. (sma4,000 ft.-lb. Standard-Strength PISA anchors,ll hub) Tough One ® anchors,10,000 ft.-lb. (small hub) TougOne® anchors,6,000 ft.-lb. Mid-Strength PISA anchors. Fits 1-3/8 solid & 2.25" socket driveinside 1.46outside 2.16
6 1/2" BOLT 5 1/4 CENTER This is an attachment and goes with the Kelly Bar Drive End Wrench and the Kelly Bar Adapter to install anchors. The Locking dog weighs 20 pounds and is 7 inches high. C3030069HD
To determine which Kelly Bar Adapter you need first measure your Kelly Bar across the flats for the correct Kelly Bar Adapter size. Then determine the maximum torque possible from the Digger motor to choose the correct Kelly Bar Adapter.Two torque ratings are available,10,000 and 15,000 ft-lbs. 18 pounds.
Especially designed for use with the Chance portable anchor
installer. This tool bolts directly to the installer's output flange or
Kelly bar adapter having six 1/2" dia. holes on a 5-1/4" bolt circle.
Adjustable pivoting plates accept rods from 3/4" to 1-1/4" diameter.
For manually-installed foundations, eyenut must be temporarily
installed for installation. Has four holes on 5-1/4" bolt circle for
attachment. Includes four 1/2" x 1-1/2" bolts, nuts and lockwashers.
To be used with 7ft 1" D100, 3.5ft 1" D10031, or D75 3/4" 12632 Pisa rods only.Pin for Shear Torque Indicator. Sold in packs of 100.
SHEAR PIN HUBBELL C3030045
Little Beaver The LB-1 kit consist of:
MANTA LB-4SSC 50102, 4 X 42" Auger with Carbide Tip for HDL-210 Replacement
MANTA LB-9054 50117 4" X 36" Auger Snap-On Extension
Complete setup to drive a Manta Ray anchor into the ground. When pulled the Manta Ray will lock horizontally into the ground never coming loose. One of the best ways to assemble a down guy.REFURBISHED
The SGC-14 drive steel kit also a GADD set will install the drive Manta Ray Anchors.For 1-1/4" x 6" chuck hammer/breakers Sets are 8' total length: include shank, 3 couplers, 2 extensions, 1 drive tip, gad extractor bar, & carrying bag
Light Duty Hand Pump.The LL-2 Anchor Locking kit is designed to Load Lock and proof test Small Manta Rayand Duckbill anchors. It is manually operated and has a maximum capacity of 8000pounds (36kN). It can accommodate anchors installed vertically or at angle to theground. The anchor capacity is easily read on the included gauge. The design of the LL-2is such that the load on the anchor in pounds is equal to the pressure in psi (pounds persquare inch) as read on the gauge. It includes an accessory kit to allow attachment toanchors equipped with SAR-58 style anchor rods, AT-16 (1/2” UNC) or AT-12 (3/8”UNC) anchor rods, or cabled anchors. The kit also includes a Rod Clamp and cable slingaccessory to allow gripping of SAR-58 Style anchors below the ends of the threads.
1-1/8" hex x 6" shank, 15-1/2" OAL
The SGC-18 drive steel kit also a GADD set will install the drive Manta Ray AnchorsKit with 1-1/8" x 6" chuck hammer/breakers SGC-18Sets are 8' total length: include shank, 3 couplers, 2 extensions, 1 drive tip, gad extractor bar, & carrying bag
MANTA 50655 SG-4HD HEAVY DUTY COUPLER
1-1/4" hex x 6" shank,
Out Of Stock
The GT18 hydraulic power unit AKA Hydraulic Power Pack is engineered for continuous
professional use and is optimized to deliver ideal flows and pressures to both
Type 1 and Type 2 hydraulic tools. Its powerful 18 HP Briggs & Stratton
engine and best-in-class cooling system deliver the power and heat rejection
pros need to keep tools working uninterrupted all day in all types of
conditions. The GT18 features a computerized all-electric throttle control
system that idles-down the engine when tools aren't running, saving fuel and extending
service life. Its feature-rich, dependable operation make the GT18 the
workhorse of the industry.
Pulling Eye 1/2" - 1" Wagner Smith PE-1 6000lbs. PE-1 AUXILIARY PULLING EYE PENGO30,000 LB. ULTIMATE BREAK STRENGTH