The Buckingham OX BLOCK™50061 rope snatch block with an integrated friction bar is used for hurtman rescue, lowering loads, snubbing loads, and raising loads. Allows the rigging professional to handle loads with greater control and when lowering loads, tension is transferred from worker to the Ox Block

BUCK 5007R1 OX BUCK RIGGER SINGLE SHEAVE BUCKRIGGER

BuckRigger pulleys by Buckingham feature a swivel side plate that allows for quick and easy rope installation without removing pulley from the connecting device. The single sheave pulley with swivel eye features a 1/2 rope capacity and a WLL of 1800 lbf.

This handline system is made to raise and lower material at a work site.

The kit can also be purchased with 60′, 100′, and 120′ rope lengths. Custom rope lengths available upon request.
*Handline hook and snap are not intended for human support.

Buckingham’s lightweight BuckLimiter™ yoyo retractable unit features a compact design that uses Aluminum Alloy Construction Inside & Outside!

The Buckingham OX BLOCK™50061 rope snatch block with an integrated friction bar is used for hurtman rescue, lowering loads, snubbing loads, and raising loads. Allows the rigging professional to handle loads with greater control and when lowering loads, tension is transferred from worker to the Ox Block

The Buckingham OX BLOCK™50061 rope snatch block with an integrated friction bar is used for hurtman rescue, lowering loads, snubbing loads, and raising loads. Allows the rigging professional to handle loads with greater control and when lowering loads, tension is transferred from worker to the Ox Block

Buckingham’s lightweight BuckLimiter™ yoyo retractable unit features a compact design that uses Aluminum Alloy Construction Inside & Outside!

Made of 5/16" (8 mm) three-strand polypropylene tow rope or throw rope is spliced to eye of the snap hook.

Klein Swivel Hook with Plunger Latch. Forged steel with swivel clevis and quik-acting plunder-style latch....

Block & Tackle available with standard snap hooks or guarded snap hooks ( with snap hook nose lengthened to extend over the latch or keeper. Hooks fit under insulated and engage pin on cross arm, 25' length. Block & Tackle Klein 1802-30-SR
Weight (lbs.): 2.80 Maximum safe load is 750 lbs. (338 kg). 25 ft rope length.

Klein Swivel Hook with Plunger Latch. Forged steel with swivel clevis and quick-acting plunder-style latch....

• Blocks without ropes and hooks
• Made of light galvanized steel and aluminum alloy
• Sheaves have bronze bushings
• This item is NOT an occupational protective device; do NOT use for human support
• Throat Opening Metric: 16 mm Swivel Opening: 1-3/16'' x 1'' Overall Length: 5''

Klein Swivel Hook with Plunger Latch. Forged steel with swivel clevis and quick-acting plunder-style latch....

Slingco’s Double Locking Snap Hook has a safe working load limit of 5,000 lb, with a side opening feature allowing quick access to remove the hand line.

Zinc plated for rust resistance this strong Snap Hook requires double pressure points for opening to ensure safety without allowing accidental opening.

Slingco’s Hand Line Blocks feature a 3" nylon fiberglass block, with a safe working load limit of 1,000 lb.

3" Hand Line Blocks sheave can accommodate a 5/8" diameter rope, and operates smoothly on the 1/2" diameter axle and swivel bearings. The side opening feature allows quick access to remove the hand line.