Tools-Hardware-Supplies

Rentals & Services

LINKS





You are here: Home > JONARD TOOLS
We found 141 results matching your criteria.
Cable Installation Fishing Compression & Crimping
Fiber Optic Tools Pliers
Scissors & Knives Screw & Nut Drivers
Termination & Unlocking Tools Voice Data & Video
Wire & Cable Cutter Wire & Cable Stripper
Wrenches
Sort By:
1 2 3 ... 18
M18 FUEL HAMMER DRIVE W/IMPACT COMBO KIT
M18 FUEL HAMMER DRIVE W/IMPACT COMBO KIT
INCLUDES:
• (1) 2704-20 1/2" Hammer Drill
• (1) 2753-20 1/4" Hex Impact Driver
• (2) REDLITHIUM XC 5.0™ Batteries
• (1) M12-M18 Multi-Voltage Charger
• (2) Belt Clip
• (2) Bit Holder
• (1) Carrying Case
• (1) Side Handle

FEATURES:
• POWERSTATE™ Brushless Motor delivers 1,200 in-lbs of Peak Torque and up to 2,000 RPM for Faster Drilling Speeds
• REDLINK PLUS™ Intelligence prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM XC5.0(tm) Batteries deliver more work per charge and more work over the life of the battery

SPECIFICATIONS:
• Pull Impact Driver Specs from 2753-20
• Pull Hammer Drill specs from 2704-20

The 2897-22 M18 FUEL™ 2-Tool Combo Kit is the highest performing Hammer Drill & Impact Driver Combo Kit on the market. Included is the M18 FUEL™ Hammer Drill (2704-20), the Most Powerful 18-volt cordless drill on the market. Delivering up to 1,200 in-lbs of torque and up to 2,000 RPM, it provides faster drilling speed under heavy load to increase productivity. Also included is the M18 FUEL™1/4” Hex Impact Driver (2753-20), the Most Powerful Impact Driver in its class. At 1800 in-lbs of fastening torque, this impact drives screws faster but also provides greater control over power and speed thanks to its proprietary 4-mode DRIVE CONTROL™. M18 FUEL™ features the most advanced cordless technology available; a POWERSTATE™ Brushless Motor, REDLINK PLUS™ Electronic Intelligence and REDLITHIUM™ Battery Technology, resulting in longer motor life, more run time and more power.

Our Price: $451.25
Qty Add
M18 FUEL™ 1/2" High Torque Impact Wrench with Friction Ring Kit 2763-22
M18 FUEL™ 1/2" High Torque Impact Wrench with Friction Ring Kit 2763-22
WHAT'S INCLUDED:
(1) M18 FUEL™ 1/2" High Torque Impact Wrench with Friction Ring (Bare Tool) (2763-20)
(2) M18™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack (48-11-1840)
(1) M18™ & M12™ Multi-Voltage Charger (48-59-1812)
(1) Carrying Case

The M18 FUEL™ 1/2" High Torque Impact Wrench with Friction Ring Kit features the most powerful cordless wrench in its class, delivering up to 700 ft-lbs of maximum fastening torque, 1,100 ft-lbs of nut-busting torque and up to 2X more runtime. The POWERSTATE™ Brushless Motor outperforms competitors with constant power output, and the Milwaukee® designed impact mechanism delivers up to 700 ft-lbs of maximum fastening torque. The REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack delivers more work per charge and more work over pack life than any other battery. It features an onboard fuel gauge to help you monitor the charge more accurately, so there’s less downtime on the job. REDLINK PLUS™ Intelligence allows the operator to choose between 2 fastening modes with Milwaukee’s proprietary DRIVE CONTROL™ feature and ensures maximum performance and protection from overload, overheating and over-discharge.

This 18-volt lithium-ion FUEL™ High-Torque Impact Wrench offers quick, tool-free socket changes with a 1/2" friction ring anvil. You’ll get ultimate comfort during extended use with the new contoured soft grip. The kit includes 2 REDLITHIUM™ XC 4.0 Extended Capacity Battery Packs, a multi-voltage charger and a carrying case.

Our Price: $471.87
Qty Add
M18 FUEL™ 7/16" Hex High Torque Impact Wrench Kit 2765-22
M18 FUEL™ 7/16" Hex Quick Release Chuck High Torque Impact Wrench Kit 2765-22
WHAT'S INCLUDED:
(1) M18™ Lithium-Ion AC/DC Wall and Vehicle Charger (2710-20)
(1) M18 FUEL™ 7/16" Hex Utility Impacting Drill (2765-20)
(2) M18™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack (48-11-1840)
(1) Contractor Bag

The M18 FUEL™ High Torque Impact Wrench W/7/16 quick connect is the most powerful 18-volt cordless impact wrench in its class. The POWERSTATE™ Brushless Motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components. The REDLITHIUM™ Extended Capacity Battery Pack delivers more work per charge and more work over pack life than the competitors. The onboard fuel gauge helps you monitor the charge more accurately, so there’s less downtime on the job. REDLINK PLUS™ intelligence ensures maximum performance and protection from overload, overheating and over-discharge. The 7/16" quick connect allows users fast, secure insertion/removal of auger bits and socket adapters. A new contoured soft grip gives you ultimate comfort during prolonged use. The kit includes the new multi-voltage charger, so you can charge all M12 and M18 lithium-ion batteries with one charger.

Our Price: $548.75
Qty Add
Torque Wrench, Full Head 7/16", 20 in/lb JONARD TWAF-71620
Torque Wrench, Full Head 7/16", 20 in/lb JONARD TWAF-71620

Torque Wrench Full Head is a full size open end wrench that behaves like a traditional open end wrench. Designed for "F" Connectors, these wrenches help prevent over tightening. An audible click tells you the connection has been properly achieved.

These wrenches all have angle heads, sized for 7/16" F connectors and are designed with an ergonomic cushioned handle for user comfort and protection. These wrenches work in tightening mode only. Torque wrenches are configured for 20 in./lb. (2.26 in Newton Meters) covering most manufacturers' recommended torque requirements for their F connectors

Our Price: $24.64
Qty Add
Torque Wrench, Full Head 7/16", 30 in/lb JONARD TWAF-71630
Torque Wrench, Full Head 7/16", 30 in/lb JONARD TWAF-71630

Torque Wrench Full Head is a full size open end wrench that behaves like a traditional open end wrench. Designed for "F" Connectors, these wrenches help prevent over tightening. An audible click tells you the connection has been properly achieved.

These wrenches all have angle heads, sized for 7/16" F connectors and are designed with an ergonomic cushioned handle for user comfort and protection. These wrenches work in tightening mode only. Torque wrenches are configured for 30 in./lb. (3.39 in Newton Meters) covering most manufacturers' recommended torque requirements for their F connectors.


Our Price: $24.64
Qty Add
Torque Wrench, Full Head 7/16", 40 in/lb JONARD TWAF-71640
Torque Wrench, Full Head 7/16", 40 in/lb JONARD TWAF-71640

Torque Wrench Full Head is a full size open end wrench that behaves like a traditional open end wrench. Designed for "F" Connectors, these wrenches help prevent over tightening. An audible click tells you the connection has been properly achieved.

These wrenches all have angle heads, sized for 7/16" F connectors and are designed with an ergonomic cushioned handle for user comfort and protection. These wrenches work in tightening mode only. Torque wrenches are configured for 40 in./lb. (4.52 in Newton Meters) covering most manufacturers' recommended torque requirements for their F connectors. The 40 in./lb. (4.52 in Newton Meters) torque wrench can also be used on bonding hardware.


Our Price: $24.64
Qty Add
Torque Wrench W/ SST 7/16", 30 in/lb JONARD TWAFST-71630
Torque Wrench W/ SST 7/16", 30 in/lb JONARD TWAFST-71630

Torque wrench is set at 30 in./lb. with security shield attached. Security shield measures 4 ¾" (120mm), is permanently attached and pivots in 90 degree increments. Ideal for hard to reach shielded F connector fittings where a pre-set torque is required.

Our Price: $33.57
Qty Add
Torque Wrench, Speed Head, 7/16", 20 in/lb JONARD TWAS-71620
Torque Wrench, Speed Head, 7/16", 20 in/lb JONARD TWAS-71620

Torque Wrench Speed Head is designed to act like a ratcheting wrench. The tool skips over the corners of the bolt or nut being turned so no repositioning of the tool is required (allowing continuous turning).

Designed for "F" Connectors, these wrenches help prevent over tightening. An audible click tells you the connection has been properly achieved. These wrenches all have angle heads, sized for 7/16" F connectors and are designed with an ergonomic cushioned handle for user comfort and protection. These wrenches work in tightening mode only. Torque wrenches are configured for 20 in./lb. (2.26 in Newton Meters) covering most manufacturers' recommended torque requirements for their F connectors. Torque wrench is 6 1/2" long.


Our Price: $25.00
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
   
 
1 2 3 ... 18