You are here: Home > American Polywater
We found 31 results matching your criteria.
AMERICAN POLYWATER CABLE PULLING LUBRICANTS AND CLEANERS
Sort By:
1
AquaKleen™ KIT W/ Finger Sprayer Fiber Cleaner POLYWATER AQ-KIT2 AquaKleen™ KIT W/ Finger Sprayer Fiber Cleaner POLYWATER AQ-KIT2

Includes:
(2) 2-ounce (60 ml) AquaKleen™ Type AQ Finger Sprayer
175 microfiber towels in a sealed plastic dispenser pack with cleaning pad
2.5 mm FiberKleen™ foam swab (100 pack)


Water-based
Less toxic
Eco-friendly
94% pure deionized water
Convenient packaging
Non-hazardous for air shipment
Meets Telcordia specification GR-2923-CORE
“Generic Requirements for Fiber Optic Connector Cleaning Products.”

AquaKleen™ is a special blend of 94% pure deionized water with cleaning
solvents. AquaKleen™ Cleaner is friendly to the environment, less toxic,
and safer for use by humans.

FiberKleen™ towelette dispenser contains 175 lint-free, high-quality
microfiber towels that are used to clean ferrules, bulkheads and fiber
endfaces. The engineered design of the nonwoven, highly absorbent
towel traps the dirt and debris re-moved from ferrules, making cleaning
easier and more effective.
Variety of swabs also available.

Our Price: $110.61
CableFree® Loosener POLYWATER CF-35 CableFree® Loosener POLYWATER CF-35

Inlcudes:
1-quart bottle (.95 liter)

Loosens stuck cable by softening binding agents such as wax, rust, soap, dirt, bitumen.
Lubricates to minimize the force required to pull the cable out once it has broken free.
Leaves empty conduit undamaged and ready for re-use after cleaning and drying.
Lowers duct reclamation costs by eliminating expensive cut-ins.
Limits liability. Meet NEC Code for Removal of Abandoned Cable.

CableFree® Loosener is a white, water-based, general-purpose dissolver/lubricant.
It is a thick, pourable liquid for convenient loading into conduit. It dissolves waxes, bitumen,
soil deposits, and lifts rust. It also provides a lubricating film to ease cable removal once
the cable has broken free

QUANTITY
As a rule of thumb, 1 quart of CableFree® Loosener should be used for every 50 feet of 1" conduit
(1 liter per 15m of 2.5cm conduit). For larger conduits, the following equation provides a starting
estimate of the amount of Loosener for a particular cable removal:

Q = .02 x L x D (Metric Formula: Q = .024 x L x D)

where: Q = quantity required in quarts (liters for metric)
L = length of the conduit in feet (meters for metric)
D = diameter of the conduit in inches (centimeters for metric)

Our Price: $30.55
CLEANER DEGREASER POL-HPY-12 CLEANER DEGREASER POL-HPY-12

POL-HPY-12 16 OZ. AEROSOL CAN.
Multipurpose Cleaner/Degreaser for
Electrical Maintenance and Cable Cleaning.
High Solvency – Excellent for cable splice preparation and electrical equipment cleaning.
Multipurpose – One cleaning solvent for electrical installations.
No Residue – Type HP™ evaporates completely with no residue.
Non-Conductive – Will not short across typical electrical voltages.
Harmless – Compatible with most plastics and rubbers.
Safe – Replaces chlorinated electrical cleaners.
Polywater® Type HP™ is the best option for reducing the number of different solvents used in maintenance and cleaning operations. It is excellent for termination of medium and high voltage cables, and for degreasing a wide variety of apparatus, including switchgear, contacts, transformers, and electrical motors. Type HP™ evaporates slowly, allowing more working time compared to other cleaners. It has an adjustable spray head with three settings, offering additional control over the amount of solvent being used.

Our Price: $7.66
Communications Gel Lubricant POLYWATER  CGL-128 Communications Gel Lubricant POLYWATER CGL-128

Includes: 1-gallon (3.8 liter) pail

Polywater® Lubricant CGL is a high performance, gel cable pulling for
fiber optic, copper or coaxial cable pulls.

Polywater® Lubricant CGL provides maximum friction reduction between cable
and conduit under both low and high sidewall bearing pressures. It is slow-drying
and leaves a lubricating film after its water base has evaporated.


Polywater® CGL is a gel material and can be applied by hand or using Polywater’s LP Pumps.

Polywater® Lubricant CGL is safe for the aquatic environment. It meets California regulation
CCR 22. Polywater® CGL is suitable for use on PE and low-smoke zero-halogen
(LSZH) communication cable jackets.

Polywater® WCGL (winter grade) has the same characteristics as Polywater® CGL
and is specially formulated for use in temperatures as low as -20°F (-30°C).

Our Price: $21.36
Communications Gel Lubricant POLYWATER  CGL-640 Communications Gel Lubricant POLYWATER CGL-640


Includes: ONE 5-gallon (3.8 liter) pail.
Polywater® Lubricant CGL is a high performance, gel cable pulling for
fiber optic, copper or coaxial cable pulls.
Polywater® Lubricant CGL provides maximum friction reduction between cable
and conduit under both low and high sidewall bearing pressures. It is slow-drying
and leaves a lubricating film after its water base has evaporated.

Polywater® CGL is a gel material and can be applied by hand or using Polywater’s LP Pumps.
Polywater® Lubricant CGL is safe for the aquatic environment. It meets California regulation
CCR 22. Polywater® CGL is suitable for use on PE and low-smoke zero-halogen
(LSZH) communication cable jackets.
Polywater® WCGL (winter grade) has the same characteristics as Polywater® CGL
and is specially formulated for use in temperatures as low as -20°F (-30°C).

Polywater® Lubricant CGL is also a superior pulling lube for pulling power wire/cables into all types of conduit.

Our Price: $43.33
Communications Pourable Lubricant POLYWATER  CPL-128 Communications Pourable Lubricant POLYWATER CPL-128

Includes:1-gallon (3.8 liter) jug



Polywater® Lubricant CPL is a high performance, pourable liquid cable
pulling lubricant for long fiber optic, copper or coaxial cable pulls.

Polywater® Lubricant CPL provides maximum friction reduction
between cable and conduit under both low and high sidewall bearing
pressures. It is slow-drying and leaves a lubricating film after its water
base has evaporated. Polywater® CPL is a liquid lubricant and can be
applied by pouring into an up-turned duct or funnel.

Polywater® Lubricant CPL is safe for the aquatic environment. It meets
California regulation CCR 22. Polywater® CPL is suitable for use on PE
communication cable jackets.

Polywater® WCPL (winter grade) has the same characteristics
as Polywater® CPL and is specially formulated for use in
temperatures as low as -20°F (-30°C).

Our Price: $18.71
SALE Price: $8.54
You save $10.17!
Communications Pourable Lubricant POLYWATER  CPL-640 Communications Pourable Lubricant POLYWATER CPL-640 5gal bucket

Includes: ONE 5-gallon (18.9 Liter) pail
Polywater® Lubricant CPL is a high performance, pourable liquid cable pulling
lubricant for long fiber optic, copper or coaxial cable pulls.
Polywater® Lubricant CPL provides maximum friction reduction between cable
and conduit under both low and high sidewall bearing pressures. It is slow-drying
and leaves a lubricating film after its water base has evaporated. Polywater® CPL
is a liquid lubricant and can be applied by pouring into an up-turned duct or funnel.
Polywater® Lubricant CPL is safe for the aquatic environment. It meets
California regulation CCR 22. Polywater® CPL is suitable for use on
PE communication cable jackets.
Polywater® WCPL (winter grade) has the same characteristics as
Polywater® CPL and is specially formulated for use in
temperatures as low as -20°F (-30°C).

Our Price: $68.22
ELECTRICAL CONTACT CLEANER POL-FD-9 ELECTRICAL CONTACT CLEANER POL-FD-9

16 OZ. AEROSOL CAN.
A Fast-Drying Cleaner
for Electrical and General Industrial Use
Fast Evaporating – Saves time and ensures moisture doesn’t compromise the splice.
Multipurpose – One cleaning solvent for electrical installations.
Safer – Suitable replacement for chlorinated cable/electrical cleaners and spray degreasers.
Variety of Packaging – To meet different end uses.
Non-Conductive – Will not short across typical electrical voltages.
FD™ Electrical Contact Cleaner is a fast-drying, multi-purpose industrial and maintenance cleaner. It is suitable for electrical and communication maintenance cleaning. It replaces ozone-depleting CFC’s, trichloroethane, trichloroethylene, HCFCs, perchloroethylene, and other carcinogenic chlorinated solvents. FD™ Cleaner effectively dissolves industrial grimes, greases, lubrication fluids, silicone, tars, adhesives, and fluxes.
FD™ Electrical Contact Cleaner leaves no residue once dried. It is excellent for cleaning contacts, meters, communication equipment.

Our Price: $8.99
Fiber Concentrated Liquid Lubricant POLYWATER FTTX-35LR Fiber Concentrated Liquid Lubricant POLYWATER FTTX-35LR

Includes: 1-quart (.95 liter) bottle with sprayer


Polywater® FTTx Fiber Lubricant makes the installation of fiber drops easy.
The lubricant is concentrated, only a thin film is required for immediate tension
reduction that lasts even as the lubricant dries. Spray or wipe the cable or conduit.
Quick and easy to use without mess or excess lubricant.


Perfect for Fiber Optic Drops
Non-Staining, Quick Clean-Up
Easy Application with Spray or Wipe
Lubricates with Very Thin Film, Performs After Drying
Compatible with Common Cable Jackets – Including Polyethylene
Helps Prevent "Wet Link" Insertion Loss in Category 6 Data Cables


Polywater® FTTx Lubricant is easy to apply. It can be sprayed into conduit
or wiped onto cable, making the installation of multiple drops quick and convenient.
Use Polywater® FTTx to insure fast installation without mess.



Our Price: $14.01
Fiber Optic Cable Lubricant   POLYWATER F-640 Fiber Optic Cable Lubricant POLYWATER F-640

Fiber Optic Cable Lubricant POLYWATER F-640

Includes: 5-gallon pail (18.9 l)
Polywater® Lubricant F is a high performance, pourable liquid
lubricant recommended for long, difficult, lightguide cable pulls.
It is slow drying and leaves a lubricating film after its waterbase has
evaporated. Polywater® Lubricant F will not stress crack low
density polyethylene. It is compatible with all common types of cable jackets.
Polywater® Lubricant WF (winter grade) has the same characteristics
as Polywater® Lubricant F and is specially formulated for use in
temperatures as low as -20°F (-30°C).

Our Price: $72.81
SALE Price: $46.70
You save $26.11!
Fiber Optic Cable Lubricant  Qt Squeeze Bottle POLYWATER F-35 Fiber Optic Cable Lubricant Qt Squeeze Bottle POLYWATER F-35

Includes: 1-qt squeeze bottle (.95 l)

Polywater® Lubricant F is a high performance, pourable liquid lubricant
recommended for long, difficult, lightguide cable pulls. It is slow drying and
leaves a lubricating film after its waterbase has evaporated. Polywater® Lubricant
F will not stress crack low density polyethylene. It is compatible with
all common* types of cable jackets.

Polywater® Lubricant WF (winter grade) has the same characteristics as Polywater®
Lubricant F and is specially formulated for use in temperatures as low as -20°F (-30°C).

Our Price: $8.44
Fiber Optic Cable Lubricant POLYWATER F-128 Fiber Optic Cable Lubricant POLYWATER F-128

Includes: 1-gallon jug

Polywater® Lubricant F is a high performance, pourable liquid lubricant
recommended for long, difficult, lightguide cable pulls. It is slow drying and
leaves a lubricating film after its waterbase has evaporated. Polywater®
Lubricant F will not stress crack low density polyethylene. It is compatible with
all common* types of cable jackets.

Polywater® Lubricant WF (winter grade) has the same characteristics
as Polywater® Lubricant F and is specially formulated for use in temperatures
as low as -20°F (-30°C).


Our Price: $18.75
175-TOWEL  FiberKleen Fiber Cleaner Dispenser w/ Cleaning pad POLYWATER DT-D175 FiberKleen Fiber Cleaner Dispenser w/ Cleaning Pad 175-TOWEL CT POLYWATER DT-D175

FiberKleen™ towelette dispenser contains 175 lint-free, high-quality microfiber
towels that are used to clean ferrules, bulkheads and fiber endfaces.
The engineered design of the nonwoven, highly absorbent towel traps the dirt and debris
re-moved from ferrules, making cleaning easier and more effective. Variety of swabs also available.

Our Price: $13.08
FST™ Duct Sealant Water Block Foam Kit POLYWATER FST-250 FST™ Duct Sealant Water Block Foam Kit POLYWATER FST-250

Includes:
1 8.5-oz two-part Foam Sealant caulking tube style (cat# FST-250)
1 Mixing nozzles
1 Resealing cap

Seal water, dirt, oil, gases, rodents, or other contaminants out of conduit/duct or central office
Protect your investment in cable, electronics
Deter copper cable thieves
Cured foam is strong, resilient and chemically resistant
Provides superior protection in adverse field conditions
and where cable movement is present
Can hold 22 feet water-head pressure over an extended period of time
Will tolerate cable movement

Foam expands and cures quickly even when water is present
Seal ducts quickly and neatly
Two-part foam is mixed in nozzle as it is injected -- no mixing required
Saves time with no measuring
Packages are resealable, no waste
Cured foam is semi-permanent and can be removed
No known effects on common cable and wire jacketing compounds.

Our Price: $59.37
FST™ Duct Sealant Water Block Foam Kit POLYWATER FST-250KIT FST™ Duct Sealant Water Block Foam Kit POLYWATER FST-250KIT

Includes:
1 8.5-oz two-part Foam Sealant caulking tube style (cat# FST-250)
3 Mixing nozzles
4 24" Foam damming strips (cat# FST-DAM)
1 24" Abrasive strip
1 Pair disposable gloves
1 Positioning rod for foam dam
1 Pre-treating wipe (cat# HP-P158ID)
1 Resealing cap
1 Instruction sheet

Seal water, dirt, oil, gases, rodents, or other contaminants out of conduit/duct or central office
Protect your investment in cable, electronics
Deter copper cable thieves
Cured foam is strong, resilient and chemically resistant
Provides superior protection in adverse field conditions
and where cable movement is present
Can hold 22 feet water-head pressure over an extended period of time
Will tolerate cable movement

Foam expands and cures quickly even when water is present
Seal ducts quickly and neatly
Two-part foam is mixed in nozzle as it is injected -- no mixing required
Saves time with no measuring
Packages are resealable, no waste
Cured foam is semi-permanent and can be removed
No known effects on common cable and wire jacketing compounds.

FST™ Duct Sealant Water Block Foam Kit POLYWATER FST-250KIT

Our Price: $74.96
Grime-Away™ Multipurpose Cleaning Individual premoistened Wipes POLYWATER HTC-1 Grime-Away™ Multipurpose Cleaning Individual Premoistened Wipes POLYWATER HTC-1

Includes: ONE Individual presaturated 8" x 12" premoistened wipe.

Grime-Away wipes are heavy-duty towelettes premoistened with a
multi-
purpose cleaning solution.

Grime-Away moisturizes and softens hands while cleaning tools and surfaces.

Grime-Away towels feature a textured side to quickly remove greases, dirt,
and
grime. They also feature a soft side to be gentler on skin.

Grime-Away is tested and approved for compatibility with rubber insulating
gloves. Salisbury by Honeywell used their “Criteria for Evaluating Chemicals in
Contact with Salisbury Natural Rubber Lineman Equipment” to determine the affect
of Grime-Away
on skin contact with insulating gloves. Salisbury approves Grime-Away
for cleaning hands which then contact insulating gloves (not for use on the gloves themselves).

Quickly Removes:

  • Transformer Oils
  • Cable Gels
  • Silicone Greases
  • Gray and Black Oxide Inhibitors
  • Dirt/Soil
  • Adhesives
  • Caulk
  • C Cement
  • HDD Pipe Thread Grease
  • Tar/Asphalt

Use On:

  • Tools
  • Transformers
  • Work Surfaces
  • Equipment
  • Service Vehicles
  • Machinery
  • Skin
  • And More

Our Price: $0.63
Grime-Away™ Multipurpose Cleaning Wipes CANISTER POLYWATER HTC-D72 Grime-Away™ Multipurpose Cleaning Wipes CANISTER POLYWATER HTC-D72

Includes: Dispenser with 72 10" x 12" premoistened wipes

Grime-Away wipes are heavy-duty towelettes premoistened with a
multi-
purpose cleaning solution.
Grime-Away moisturizes and softens hands while cleaning tools and surfaces.
Grime-Away towels feature a textured side to quickly remove greases, dirt,
and
grime. They also feature a soft side to be gentler on skin.
Grime-Away is tested and approved for compatibility with rubber insulating
gloves. Salisbury by Honeywell used their “Criteria for Evaluating Chemicals in
Contact with Salisbury Natural Rubber Lineman Equipment” to determine the affect
of Grime-Away
on skin contact with insulating gloves. Salisbury approves Grime-Away
for cleaning hands which then contact insulating gloves (not for use on the gloves themselves).

Quickly Removes:

  • Transformer Oils
  • Cable Gels
  • Silicone Greases
  • Gray and Black Oxide Inhibitors
  • Dirt/Soil
  • Adhesives
  • Caulk
  • C Cement
  • HDD Pipe Thread Grease
  • Tar/Asphalt

Use On:

  • Tools
  • Transformers
  • Work Surfaces
  • Equipment
  • Service Vehicles
  • Machinery
  • Skin
  • And More

Our Price: $11.99
HydraSol® Remover Durable Saturated Wipes POLYWATER HS-1 HydraSol® Remover Durable Saturated Wipes POLYWATER HS-1

Includes: One Saturated lint-free wipe in foil pack.

Durable Saturated Wipe - HydraSol® Remover is available in a presoaked
towelette. The large, tear-resistant towelette comes in an easy-open foil pack.
The towelette is especially effective for smaller cleaning jobs. Saves money over bulk
use with rags.
And now available in handy 72-count self-dispensing and resealable canisters!

  • Maximum Solvency Power on PE/PJ or ETPR Greases
  • Rinses Off With Water--Water Base
  • Good For Multiple Cleanings
  • No Chlorinated Solvent, CFC, or Glycol Ether Content
  • Available in a Variety of Convenient Packages

HydraSol® Remover's components are on the FDA's and FEMA's
"generally recognized as safe" lists. They have
low toxicity whether by oral,
inhalation or dermal exposure. The product is water-based (over 50% water).

HydraSol® Remover softens, removes and suspends cable filling greases.
The solvent remains active and is only slowly "used up." HydraSol® Remover
is good for multiple cleaning for economy and efficiency.

HydraSol® Remover is easy to rinse off hands and tools. Dissolved
grease isn't "redeposited" as the cleaner residue dries.

Our Price: $0.66
Pad N Pole™ REPAIR W/ Tool  POLYWATER BRK-KITG Pad N Pole™ REPAIR W/ Tool POLYWATER BRK-KITG

Includes:
1 PowerPatch® Pad N Pole™ Repair Adhesive Cartridge
6 Mixing Nozzles
1 Strip of Sanding Cloth
6 HP™ Tandem Cleaning and Drying Wipes (HP-P158ID)
6 Foam Brushes
1 Square Foot Patch Material
1 Instruction Sheet
1 Dispensing Tool


The PowerPatch® Pad N Pole™ Repair system repairs and restores damaged
utility enclosures, preventing human, water, pest or debris entry through the
repaired defect.

PowerPatch® Pad N Pole™ two-part adhesive bonds to fiberglass, polyethylene,
metal, concrete and composites. Fiberglass cloth (saturated with the adhesive)
provides structural integrity for a durable, long-lasting repair.

PowerPatch® Pad N Pole™ Repair comes in a kit that contains everything needed
for a repair. The adhesive is easy to dispense and quickly wets the fiberglass cloth.
The fiberglass can be layered as necessary to create a thicker and stronger structure.
Repairs are quick and easy, and can be done in the field with a single visit with
little to no training.


Seals defects from unwanted entry
Easy to use - quick repair
Protects and seals enclosure
Complete field repair in single visit

Our Price: $129.01
Prelube 2000™  Cable Blowing Lubricant POLYWATER P-35 Prelube 2000™ Cable Blowing Lubricant POLYWATER P-35

Prelube 2000™ Cable Blowing Lubricant POLYWATER P-35

Our Price: $13.65
Prelube™ 5000  Microcable Blowing Lubricant POLYWATER PM-8 Prelube™ 5000 Microcable Blowing Lubricant POLYWATER PM-8

Prelube™ 5000 Microcable Blowing Lubricant POLYWATER PM-8

Our Price: $22.65
QuicKleen™ Fiber Cleaner w/2oz-Sprayer POLYWATER QC-KIT2 QuicKleen™ Fiber Cleaner w/2oz-Sprayer POLYWATER QC-KIT2

Inlcudes:
175 microfiber towels in a sealed plastic dispenser pack with cleaning pad
(2)
2-ounce (60 ml) Type QC pump-spray plastic bottle
2.5 mm FiberKleen™ foam swab (100 pack)
all in a handy nylon bag

QuicKleen is a unique solvent blend that cleans completely, leaves no residue,
and evaporates quickly. No water content means no streaking or residue. Cleaner is
available in a convenient 2-ounce spray package, and as part of an all inclusive kit.

FiberKleen towelette dispenser contains 175 lint-free, high-quality microfiber towels
that are used to clean ferrules, bulkheads and fiber end faces. Keeps towels safe from
contamination and easily fits into tool kits and bags.

The engineered design of the specially woven towel traps the dirt and debris removed
from ferrules, making cleaning easier and more effective. Also available are 2.5 mm swabs for easy cleaning.

  • Maximizes connectivity
  • Optimized for 1625 nm standard
  • Leaves no residue
  • Evaporates quickly
  • No streaking
  • Convenient packaging
  • Non-hazardous for air shipment

Our Price: $110.61
SqueekyKleen™ Qt Telcom Cleaner w/ Spayer POLYWATER TC-35LR SqueekyKleen™ Qt Telcom Cleaner w/ Spayer POLYWATER TC-35LR

New SqueekyKleen cleans and fans fiber in two wipes without alcohol,
saving time and money. No follow-up with alcohol required
to get fibers squeaky clean and separated when prepping for splicing.
SqueekyKleen
is less harsh on hands and reduces chemical odors and vapor
concentrations to a minimum in splice trailers and vaults. SqueekyKleen's
unique
formulation and specially designed high-performance towelette work to remove pik
from the entire surface of loose-tube or ribbon fibers, leaving no residue. SqueekyKleen

helps keep splice equipment clean of contamination for better fiber alignment and splice
quality. Safe on acrylate and Mylar
®.

Our Price: $14.72
SqueekyKleen™ Telcom Cleaner-Saturated Wipe POLYWATER TC-1 SqueekyKleen™ Telcom Cleaner-Saturated Wipe POLYWATER TC-1

Inlcudes: one Individual saturated wipe.

New SqueekyKleen cleans and fans fiber in two wipes without alcohol, saving
time and money.
Hear the difference! No follow-up with alcohol required to get fibers
squeaky clean and separated when prepping for splicing. SqueekyKleen
is less
harsh on hands and reduces chemical odors and vapor concentrations to a
minimum in splice trailers and vaults. SqueekyKleen's
unique formulation and
specially designed high-performance towelette work to remove pik from the entire
surface of loose-tube or ribbon fibers, leaving no residue. SqueekyKleen
helps
keep splice equipment clean of contamination for better fiber alignment and splice
quality. Safe on acrylate and Mylar
®.

Cleans off pik without the use of alcohol

Minimal wiping (2 wipes only)
No residue
Safe to use on ribbon fiber
Fans fiber quickly
Cleans fiber squeaky clean
Tested and approved

Our Price: $1.61
Type FO™  Anhydrous Alcohol Prep Wipe POLYWATER FO-1 Type FO™ Anhydrous Alcohol Prep Wipe POLYWATER FO-1

Includes: ONE 5" x 8" Wipe in Sealed Foil Pouch
Fast Evaporating
Non-Abrasive
No Residue
Convenient Package
Non-Chlorinated
Excellent Solvency
Available in Bulk
99.8% Anhydrous Alcohol
Type FO™ is great for cleaning glass fiber or connector end faces for better
light transmission performance. Type FO™ quickly removes dust, oils, and contaminants,
while leaving no residue. The anhydrous alcohol in FO™ has essentially no water content.
Avoiding water is important with optic fiber cleaning.
Type FO™ is available in a convenient pre-saturated towelette. The towels
are durable and non-linting. Pre-saturated wipes are a convenient option for
field use. The package limits vapor exposure and eliminates spill hazards.
There is no need to transport bulk quantities of flammable alcohol.

Our Price: $0.63
Type FO™ Anhydrous Alcohol 8-Oz Refillable bottle POLYWATER FO-8LF Type FO™ Anhydrous Alcohol 8-Oz Refillable bottle POLYWATER FO-8LF

Inlcudes: 8 oz Refillable Bottle w/Flip top

Fast Evaporating
Non-Abrasive
No Residue
Convenient Package
Non-Chlorinated
Excellent Solvency
Available in Bulk
99.8% Anhydrous Alcohol

Type FO™ is great for cleaning glass fiber or connector end faces for
better light transmission performance. Type FO™ quickly removes dust,
oils, and contaminants, while leaving no residue. The anhydrous alcohol in
FO™ has essentially no water content. Avoiding water is important with optic fiber cleaning.

Type FO™ is available in a convenient pre-saturated towelette. The towels
are durable and non-linting. Pre-saturated wipes are a convenient option for
field use. The package limits vapor exposure and eliminates spill hazards. There
is no need to transport bulk quantities of flammable alcohol.

Our Price: $12.87
TType FO™ Anhydrous Alcohol One Qt. Bottle POL-FO-32 Type FO™ Anhydrous Alcohol One Qt. Bottle POL-FO-32

Type FO™ Anhydrous Alcohol One Qt. Bottle POL-FO-32

Fast Evaporating
Non-Abrasive
No Residue
Convenient Package
Non-Chlorinated
Excellent Solvency
Available in Bulk
99.8% Anhydrous Alcohol

Type FO™ is great for cleaning glass fiber or connector end faces for
better light transmission performance. Type FO™ quickly removes dust,
oils, and contaminants, while leaving no residue. The anhydrous alcohol in
FO™ has essentially no water content. Avoiding water is important with optic fiber cleaning.

Type FO™ is available in a convenient pre-saturated towelette. The towels
are durable and non-linting. Pre-saturated wipes are a convenient option for
field use. The package limits vapor exposure and eliminates spill hazards. There
is no need to transport bulk quantities of flammable alcohol.

Our Price: $13.32
Type RP™  Rapid Power TELCOM/ CATV Cleaner & Degreaser Solvent Wipe POLYWATER RP-1 Type RP™ Rapid Power TELCOM/ CATV Cleaner & Degreaser Solvent Wipe POLYWATER RP-1

Includes: One Saturated 5" x 8" Wipe in Sealed Pouch

Type RP is a fast evaporating cleaner with excellent solvency properties.

Type RP is an effective splice and termination cleaner.

Type RP will clean semi-conducting cable shield, corrosion inhibiting
compound, silicone greases, filling gels, transformer oils and many other
contaminants found in electrical cleaning. It is compatible with most materials.


Type RP is available in convenient pre-saturated towelettes and cable prep kits.
Pre-saturated wipes are a great option for field use. The towels are durable and
non-linting. The pouch package limits vapor exposure and eliminates spill and splash hazards.


Type RP
passes IEEE 1493, Guide for the Evaluation of Solvents Used for
Cleaning Electrical Cables and Accessories.

Our Price: $0.56
ZipSeal™ Duct Sealant w/ Tool POLYWATER ZIP-50KIT1G ZipSeal™ Duct Sealant w/ Tool POLYWATER ZIP-50KIT1G

Includes:
1 50mL two-part foam sealant cartridge w/ resealing cap,
2 static mixing nozzles, 2 pairs disposable gloves
5 2” Zip-Discs w/ dispensing tool -50-11


ZipSeal™ Duct Sealant is a practical and efficient way to seal innerducts
and conduits. The revolutionary Zip-Disc insert and unique two-part foam installs
quickly and effectively. This innovative design allows for horizontal and vertical installation
with minimal drippage. The foam can be re-entered in just minutes.


ZipSeal™ can hold up to 10 feet water-head pressure.

Seals out Water, Sewer Gasses, and Rodents from Conduits

Installs in 45 Seconds
Easy to Re-enter
Holds up to 10 Feet Water-head Pressure
One Kit Seals Six 2-Inch (50mm) Conduits
Compatible with Cables and Conduits
Complies with TIA-758-B Standard 5.1.1.2.8, 5.4.2.3 and 7.4.2.8.1 Sealing Ducts

Our Price: $99.32
   
 
1