You are here: Home > Underground Tools > Fiber Optic Cable Blowing Equipment
We found 38 results matching your criteria.
Arnco Air-Trak II Replacement Parts CONDUX Fiber Blowers & Accessories FREMCO Fiber Blowing Machines
GMP Fiber Blowing Machines
Fiber Optic Cable Blowing Equipment
Sort By:
1
GMP 89000 TORNADO CABLE BLOWING MACHINE GMP 89000 TORNADO CABLE BLOWING MACHINE

GMP 89003 TORNADO
Designed to be safe, fast and effective, even on tough terrain, the "Tornado" cable blowing machine will move fiber optic cable of 0.23 to 1.25 in. (5.84-32 mm) diameter at speeds to 300 ft./min. (90 m/min.) into pre-installed innerduct or direct-buried duct. It can accommodate innerduct from .47 to 2.48 in. (12-63 mm). A conversion kit allows the Tornado to place 12.7/10mm, 12/10mm or 10/8mm micro duct into the innerduct.

Our Price: $39,093.33
CONDUX 08782010 Gulfstream 400 Fiber Optic Cable Blower Gulfstream 400 Fiber Optic Cable Blower Condux 08782010

Gulfstream 400 Fiber Optic Cable Blower Package 1A
(includes Cable Packs # 1-4, and Duct Packs #2-5)

Extremely easy to transport, the blower and all accessories
conveniently fit into a lightweight job box with wheels.


Designed for the installation of fiber optic cables with diameters from
0.23" (5.8 mm) to 1.13" (28.7 mm) into microduct.
Order Duct and Cable Packs separately, to ensure the
correct size for your needs.
GS400, GS 400

Our Price: $34,343.07
FREMCO 101-41021 MultiFlow RAPID for SINGLE CABLE Fiber Blower MultiFlow RAPID for SINGLE CABLE Fiber Blower FREMCO 101-41021

MultiFlow RAPID Single Cable 101-41021 and Relining 101-41002
This machine is very flexible as it can both be configurated for single cable and for relining. It can blow many different combinations of ducts and microducts.
  • Designed for RELINING of multiple micro ducts, but it can also be operated for SINGLE CABLES
  • Fiber/Cable OD: 5.5-32 mm
  • Duct size OD: 10-63 mm
  • Preparation time: 8-10 min
  • Blowing distance: up to 16,404 feet
  • Floating distance (with water):up to 32,808 feet
INCLUDES:
  • Inlet guide incl. rollers and digital counter (US Item No.: 103-190109002)
  • Flex block (Item No.: 103-200210001)
  • 1 set of chains (chosen on page 2)*
  • 1 Portable work station. It protects the machine during transportation and creates a better work posture.

Our Price: $25,738.00
GMP89300 AIR STREAM MICRO FIBER BLOWING MACHINE AIRSTREAM MICRO FIBER BLOWING MACHINE GMP 89300

AIRSTREAM MICRO FIBER BLOWING MACHINE GMP 89300
AIR STREAM Fiber Blower

Our Price: $22,821.33
FREMCO 101-41001 POWERFLOW RAPID  Fiber Blower PowerFlow RAPID Fiber Blower FREMCO 101-41001

POWERFLOW RAPID
  • Easy to operate and designed for rough conditions. This hydraulic machine can blow a large variety of larger cables, fibers and ducts.
  • Fiber/Cable OD: 5.5-25 mm
  • Duct size OD: 10-63 mm
  • Preparation time: 8-10 min
  • Blowing distance: up to 16,404 feet
  • Floating distance (with water): up to 32,808 feet
INCLUDES:
  • Inlet guide incl. rollers and digital counter (US Item No.: 103-190109002)
  • Flex block (Item No.: 103-200210001)
  • 1 set of chains (chosen on page 2)*
  • 1 Portable work station. It protects the machine during transportation and creates a better work posture.

Our Price: $22,675.87
Condux 08784601 Gulfstream 350™ Fiber Optic Cable Blower Pneumatic Blower base kit Gulfstream 350™ Fiber Optic Cable Blower Pneumatic Blower base kit Condux 08784601

Condux Gulfstream 350 Fiber Optic Cable Blower is all pneumatic and comes complete with a convenient storage case.

Our Price: $20,892.77
Condux 08785000 M17 Kaeser Air Compressor 220psi 35cfm M17 Kaeser Air Compressor 220psi 35cfm Condux 08785000

Condux 08785000 Mobiliar M17 Air Compressor with Aftercooler / Air Conditioner, with 220psi 35cfm is a rugged and dependable unit that is perfect for variety of applications with a folding handle, oversized pneumatic tires, and compact compact design, this unit is easy to move around virtually any job-site. The M17 features Kaeser's power saving Sigma Profile airend.

GMP89011  M17 BREEZE AIR COMPRESSOR M17 BREEZE AIR COMPRESSOR GMP89011

The Air Compressor is designed specifically for use with our Micro Fiber Cable Blowing Machines. This reliable & efficient screw compressor, powered by a gasoline engine, provides a maximum working pressure of 220 psi (15 bar) with 35.3cfm (1000 litres/m) flow.

Our Price: $20,157.99
Condux 08783805-50 Gulfstream 250™ Micro Fiber Blower Standard Kit, Gulfstream 250™ Micro Fiber Blower Standard Kit, Condux 08783805-50

The Gulfstream 250 is an effective and economical approach to middle mile fiber installations. Able to install fiber optic cable ranging in size from 2.5mm - 8mm into duct from 5mm - 18mm, the Gulfstream 250 offers portability, convenience and power in a cost effective package

Our Price: $14,705.64
FREMCO 101-230320001 DUCTROD RAPID Push a Duct Rod into an Underground Duct DUCTROD RAPID Push a Duct Rod into an Underground Duct FREMCO 101-230320001

DUCTROD RAPID
Designed to push a duct rod into an underground duct. It is equipped with a flexible clamping unit, allowing you to attach the machine to the sidewall of the manhole securing more stable installation.

  • Fiber/Cable OD: 9-25 mm
  • Duct size OD: 10-40 mm
  • Preparation time: 2-4 min
  • Blowing distance: up to 500 feet

  • Tool free installation
When utilizing DuctRod RAPID, the configuration and installation can be deployed without any usage of tools.
This makes every job more effective as the machine can quickly be adapted to the specific job saving you time.
  • Adaptable to various manholes
It is equipped with a flexible clamping unit, allowing you to attach the machine to the sidewall of the manhole securing more stable installation.
  • Effective rod pushing
Each job is mechanized, which help you improve efficiency and minimizes the risk of costly errors. For rods up to 25 mm.
  • Adjustable Torque Distance and Speed
  • measurement for complete rod control
INCLUDES:
  • 1-¼“ duct clamp set (outlet) &
  • ¾ “ duct clamp set (inlet)
  • 1 set of chains (8-16 mm)
  • Control valve for DuctRod RAPID

Our Price: $13,322.69
FREMCO 101-190911002 NANOFLOW MAX  Fiber Blower NANOFLOW MAX Fiber Blower FREMCO 101-190911002

NANOFLOW MAX
  • Small but powerful fiber blowing machine, which can blow both blown fibre (EPFU) and micro/nano cables. Tested in accordance to IEC standards.
  • Fiber/Cable OD: 0.8-4.5 mm
  • Duct size OD: 3.0-12.7 mm
  • Preparation time: 3 min
  • Blowing distance: up to 3,940 feet
INCLUDES:
  • Filter and water separator
  • 2pcs. 24v, 2Ah Lithium-ion battery and battery charger (US socket)
  • MAX steel drive wheel for fiber size 0.8-3 mm
  • 2 x drive for fiber sizes 0.8-3 mm
  • 1 adaptor plate set chosen from the adapter plate kit

Our Price: $9,683.62
CONDUX 08675702 PORTABLE HYDRAULIC POWER PACK 13HP Portable 13HP Hydraulic Power Pack Condux 08675702

This portable power source is matched perfectly to the requirements for the Condux Fiber Optic Cable Blower and Puller. Utilizing a small footprint, the 13hp Power Pack features a variable flow switch (from 5gpm to 8gpm) to ensure that every job can be covered with just one machine.

Our Price: $8,787.51
GMP 32800 Hydraulic Power Pack GMP 32800 Hydraulic Power Pack

GMP 89003 TORNADO
Designed to be safe, fast and effective, even on tough terrain, the "Tornado" cable blowing machine will move fiber optic cable of 0.23 to 1.25 in. (5.84-32 mm) diameter at speeds to 300 ft./min. (90 m/min.) into pre-installed innerduct or direct-buried duct. It can accommodate innerduct from .47 to 2.48 in. (12-63 mm). A conversion kit allows the Tornado to place 12.7/10mm, 12/10mm or 10/8mm micro duct into the innerduct.

Our Price: $8,655.96
GMP 89060 - 250 CFM COMPRESSOR AFTERCOOLER 250 CFM COMPRESSOR AFTERCOOLER GMP 89060 - Special Order

The 250CFM Compressor Aftercooler has been designed to cool compressed air and remove water droplets prior to entering a GMP Cable Blowing Machine.Features a heavy-duty moisture separator and coalescing filter to trap moisture and condensed oil.

Our Price: $7,036.31
Power Dart® Blower CONDUX 08030003 Power Dart® Blower Condux 08030003

The Condux Power Dart Blower Is a pneumatic rodding system especially suited for long duct runs. A three-motor system allows you to choose the right speed for your needs. With all three motors engaged, it will deliver up to 300 cfm (8.5 m3/min) of
air at 3 psi (.2 bar) max. pressure, easily blowing 1⁄2" (13 mm) poly line or
measuring tape over 2,000 feet (610 m) in conduit up to 6 inches (152 mm) in diameter.
Parts:
Carrier Kit for Power Dart® Blower Condux 08030011
Requires a 3,000 watt generator 110 Volt model includes a 30 amp twist plug adapter.

GMP 90060 FIBER OPTIC CABLE EZ-EXIT FIBER OPTIC CABLE EZ-EXIT GMP 90060

The fiber optic cable EZ-Exit tool eliminates damage to your fiber by easily guiding fiber optic cable past the sharp edges of a manhole chimney. The easy clamping feature allows the tool to be quickly installed in less than 30 seconds, reducing the total setup time of a fiber pull. Provides a rigid, low friction shoe that guides fiber over the sharp edges at the top and bottom of a manhole chimney while maintaining a bend diameter of 45” to accommodate up to some of the largest fiber cables.

Our Price: $1,427.13
CONDUX 08764110 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher CONDUX 08764110

CONDUX 08764110 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher

Duct Size OD (mm):12mm
Innerduct Eye ID Range:10-12mm

Includes
Duct Clamp: 08764142
Duct Seal:08764143
Innerduct Eye Part Number:08913547


CONDUX 08764140 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher CONDUX 08764140

CONDUX 08764140 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher

Duct Size OD (mm):10mm
Innerduct Eye ID Range:5-9mm

Includes

Duct Clamp: 08764142
Duct Seal:08764143
Innerduct Eye Part Number:08913547

CONDUX 08030011 Carrier Kit for  Power Dart® Blower -CONDUX 08030003 Power Dart® Blower Carrier Kit for Power Dart® Blower Condux 08030011

A convenient way to order a practical assortment of carriers and seal-off products for use with the Power Dart Blower or other applications.

CONDUX 08764150 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher CONDUX 08764150

CONDUX 08764150 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher

Duct Size OD (mm):12.7mm

Innerduct Eye ID Range:10-12mm

Includes
Duct Clamp: 08764112
Duct Seal:08764113
Innerduct Eye Part Number:08913545

GMP AIRSTREAM Tube Collect and Clamp Assemblies GMP AIRSTREAM Tube Collect and Clamp Assemblies

In order to customize your new "Air Stream" to your application, we ask that you pick, one each from the lists below, the Tube Collet and Clamp Assembly P/N, the Cable Guide Assembly P/N and the Cable Collet Assembly P/N.
TUBE COLLET AND CLAMP ASSEMBLIES

Our Price: $438.17
GMP 74100 Head Cable Guide 8.0mm D Head Cable Guide 8.0mm D GMP 74100

GMP 74100, Brass Cable Guiding Heads, are screwed on to the end of the cable to reduce friction during cable blowing. these bullet heads are constructed of corrosion resistant brass and made for repeated use.
Size OD: 8mm (0.32")

List Price: $201.84
Our Price: $178.09
You save $23.75!
CONDUX 08676844 Speed Ball Split Coupling SpeedBall Split Coupling Condux 08676844

CONDUX 08676844 Speed Ball Split Coupling

Hinged aluminum split coupling for temporarily joining all types on innerduct during a cable blowing process.

Inserts are sold separately

Dura-Line 20000009  Hydralube AT500 Winter Graded Jetting or Blowing Hydralube AT500 Winter Graded Jetting or Blowing Dura-Line 20000009

Hydralube AT-500 is a high performance silicone lubricant formulated specifically for use with...

Our Price: $177.14
GMP 74099 Head Cable Guide 7mm D Head Cable Guide 7mm D GMP 74099

GMP 74099, Brass Cable Guiding Heads, are screwed on to the end of the cable to reduce friction during cable blowing. these bullet heads are constructed of corrosion resistant brass and made for repeated use.
Size OD: 7mm (0.28")

List Price: $170.55
Our Price: $151.67
You save $18.88!
GMP 74097 Head Cable Guide 6.0mm D Head Cable Guide 6.0mm D GMP 74097

GMP 74097, Brass Cable Guiding Heads, are screwed on to the end of the cable to reduce friction during cable blowing. these bullet heads are constructed of corrosion resistant brass and made for repeated use.
Size OD: 6mm (0.24")

List Price: $159.47
Our Price: $140.71
You save $18.76!
Dura Line 20000129 Hydralube CH AT500 Summer 4-1Gal Hydralube CH AT500 Summer 4-1Gal/CS Dura-Line 20000129

Hydralube AT-500 is a high performance silicone lubricant formulated specifically for use with...

Our Price: $124.14
CONDUX 08761424 Cable Seal for Gulfstream™ 400 Cable Seal for Gulfstream™ 400 Condux 08761424

Replacement Cable Seal for Fiber Optic Cable Blowers are sold in pack of 4.
Cable Diameter: 0.35-.42
These seals work the the appropriate Cable Venturi for the following blower models:
HD Blower
Deluxe Lightweight Blower
Mini-Blower/Pusher

Dura Line 20000008 Hydralube AT500 Summer Grade, Jetting or Blowing Hydralube AT500 Summer Grade, Jetting or Blowing 12QT Dura Line 20000008

Hydralube AT-500 is a high performance silicone lubricant formulated specifically for use with...

Our Price: $120.00
Polywater® J-640 Cable Lubricant for Heavy Cable Installations Polywater® J-640 Cable Lubricant for Heavy Cable Installations

Grime-Away wipes are heavy-duty towelettes premoistened with a multi-purpose cleaning solution. Grime-Away moisturizes and softens hands while cleaning tools and surfaces. Dispenser with 72 10" x 12" premoistened wipes

Our Price: $91.99
GMP AIRSTREAM Cable Guide Assemblies GMP AIRSTREAM Cable Guide Assemblies

In order to customize your new "Air Stream" to your application, we ask that you pick, one each from the lists below, the Tube Collet and Clamp Assembly P/N, the Cable Guide Assembly P/N and the Cable Collet Assembly P/N.
CABLE GUIDE ASSEMBLIES

Our Price: $89.15
CONDUX 08761435 Cable Seal for Gulfstream™ 400 Cable Seal for Gulfstream™ 400 Condux 08761435

Replacement Cable Seal for Fiber Optic Cable Blowers are sold in pack of 4.
Cable Diameter: 1.05-1.13
These seals work the the appropriate Cable Venturi for the following blower models:
HD Blower
Deluxe Lightweight Blower
Mini-Blower/Pusher

GMP AIRSTREAM Cable Seal Collet Assembly GMP AIRSTREAM Spare Cable Seal (5 Pack)

In order to customize your new "Air Stream" to your application, we ask that you pick, one each from the lists below, the Tube Collet and Clamp Assembly P/N, the Cable Guide Assembly P/N and the Cable Collet Assembly P/N.
SPARE CABLE SEAL (5 Pack)

Our Price: $78.75
Polywater® HS-128 HydraSol® Cable Gel Remover 1gl Polywater® HS-128 HydraSol® Cable Gel Remover 1gl

HydraSol® Remover softens, removes and suspends cable filling greases. The solvent remains active and is only slowly "used up." HydraSol® Remover is good for multiple cleaning for economy and efficiency.

Our Price: $70.60
Polywater® HS-32 HydraSol® Cable Gel Remover 1-quarter Bottle Polywater® HS-32 HydraSol® Cable Gel Remover 1-quarter Bottle

HydraSol® Remover softens, removes and suspends cable filling greases. The solvent remains active and is only slowly "used up." HydraSol® Remover is good for multiple cleaning for economy and efficiency. 1-quart /0.95-liter bottle with flip-top cap

Our Price: $26.39
GMP AIRSTREAM Spare Tube Seal O Ring (5 Pack) GMP AIRSTREAM Spare Tube Seal O Ring (5 Pack)

In order to customize your new "Air Stream" to your application, we ask that you pick, one each from the lists below, the Tube Collet and Clamp Assembly P/N, the Cable Guide Assembly P/N and the Cable Collet Assembly P/N.
SPARE TUBE SEAL O RING (5 Pack)

Our Price: $4.08
Dura Line 20001834 Straight Micro Coupler 8.5/6mm Straight Micro Coupler 8.5/6MM Dura Line 20001834

STRAIGHT COUPLERS
• Easy assembly/disassembly, no tools required, low profile design

• Provide an air and water tight connection
• Designed and tested to meet or exceed industry standards
• Color coded to easily identify by size
• Available for all Microduct sizes 5mm–27mm
• Specially designed to ensure a smooth interior transition
• Withstand chemical and harsh environment conditions
• "HD" or "Heavy Duty" denotes enhanced pull-out and pressure characteristics
(currently size 18/10 next page)

Polywater® HS-1 HydraSol® Cable Gel Remover Polywater® HS-1 HydraSol® Cable Gel Remover water-based cleaner for removing cable filling grease

HydraSol® Remover softens, removes and suspends cable filling greases. The solvent remains active and is only slowly "used up." HydraSol® Remover is good for multiple cleaning for economy and efficiency.

Our Price: $2.09
   
 
1