Polywater® Lubricant CGL 1gl is a high performance, gel cable pulling for fiber optic, copper or coaxial cable pulls. Polywater® Lubricant CGL is a high performance, gel cable pulling for fiber optic, copper or coaxial cable pulls.

Polywater® CPL 1gal Pourable Liquid Lubricant for Communications Cable Pulling. Polywater^® Lubricant CPL is a high-performance, pourable liquid cable pulling lubricant formulated specifically for the communications industry. It is recommended for long fiber optic, copper-paired or coaxial cable pulls.

Polywater® Lubricant CPL 5gal is a high performance, pourable liquid cable pulling lubricant for long fiber optic, copper or coaxial cable pulls.

Polywater® Lubricant F is a high performance, pourable liquid lubricant recommended for long, difficult, lightguide cable pulls. It is slow drying and leaves a lubricating film after its waterbase has evaporated.

Polywater® Lubricant F 5gl is a high performance, pourable liquid lubricant recommended for long, difficult, lightguide cable pulls.
It is slow drying and leaves a lubricating film after its water base has evaporated.

Polywater® Prelube 2000™ reduces frictional drag during the blowing of outside plant cable into duct. It increases the length of cable that can be blown in a single shot.

Polywater® Prelube 5000™ reduces frictional drag during the blowing of small diameter fiber optic microcable into microtube duct. It increases the length of cable that can be blown in a single shot.

Polywater® Lubricant CGL is a high performance, gel cable pulling for fiber optic, copper or coaxial cable pulls. Polywater® Lubricant CGL provides maximum friction reduction between cable and conduit under both low and high sidewall bearing pressures. It is slow-drying and leaves a lubricating film after its water base has evaporated.

Polywater® Prelube 2000™ reduces frictional drag during the blowing of outside plant cable into duct. It increases the length of cable that can be blown in a single shot.

GMP 74097, Brass Cable Guiding Heads, are screwed on to the end of the cable to reduce friction during cable blowing. these bullet heads are constructed of corrosion resistant brass and made for repeated use.
Size OD: 6mm (0.24")

Hydralube AT-500 is a high performance silicone lubricant formulated specifically for use with...

Hydralube AT-500 is a high performance silicone lubricant formulated specifically for use with...

Hydralube AT-500 is a high performance silicone lubricant formulated specifically for use with...