You are here: Home > Pole Line Hardware > Anchors and Rods > POWER DRIVE ANCHORS
We found 25 results matching your criteria.
POWER DRIVE ANCHORS
Sort By:
1
MSI-D10426 10" SOLID SQUARE HUB TWIN HELIX POWER DRIVEN ANCHOR 1-3/8" HUB - 6000 FT. LB. FOR 3/4" AND 1" RODS *10" SOLID SQUARE HUB TWIN HELIX POWER DRIVEN ANCHOR 1-3/8" HUB - 6000 FT. LB. FOR 3/4" AND 1" RODS H-D10426-HUB1021637

  • Installation is performed using a power digger. An anchor wrench fits over the square hub and a torque measurement device is required to determine proper installation.
  • Correct installation is achieved only when the anchor is installed using the appropriate torque for the particular soil and anchor type.
  • Installation torque is usually measured using a device connected in series with the wrench, digger, and Kelley Bar during installation.

Our Price: $144.20
MACLEAN D2104 10" TWIN SOLID SQUARE HUB HELIX POWER DRIVEN ANCHOR 1-1/2" HUB - 6000 FT. LB. FOR 3/4" AND 1" RODS MACLEAN D2104 *10" TWIN SOLID SQUARE HUB HELIX POWER DRIVEN ANCHOR 1-1/2" HUB - 6000 FT. LB. FOR 3/4" AND 1" RODS H-D2104

  • Installation is performed using a power digger. An anchor wrench fits over the square hub and a torque measurement device is required to determine proper installation.
  • Correct installation is achieved only when the anchor is installed using the appropriate torque for the particular soil and anchor type.
  • Installation torque is usually measured using a device connected in series with the wrench, digger, and Kelley Bar during installation.

Our Price: $148.80
ALLIED BOLT 492 4" TWIN SOLID SQUARE HUB HELIX POWER DRIVEN ANCHOR 1-3/8" HUB - 6000 FT. LB. FOR 3/4" AND 1" RODS *4" TWIN SOLID SQUARE HUB HELIX POWER DRIVEN ANCHOR 1-3/8" HUB - 6000 FT. LB. FOR 3/4" AND 1" RODS H-492

  • Installation is performed using a power digger. An anchor wrench fits over the square hub and a torque measurement device is required to determine proper installation.
  • Correct installation is achieved only when the anchor is installed using the appropriate torque for the particular soil and anchor type.
  • Installation torque is usually measured using a device connected in series with the wrench, digger, and Kelley Bar during installation.

Our Price: $91.73
SALE Price: $75.62
You save $16.11!
*1-1/2" TWIN SQUARE HUB ANCHOR – 7000 FT-LB INSTALLATION TORQUE D2847 *8" TWIN SOLID SQUARE HUB HELIX POWER DRIVEN ANCHOR 1-1/2" HUB - 7000 FT. LB. FOR 3/4" AND 1" RODS H-D2847

  • Installation is performed using a power digger. An anchor wrench fits over the square hub and a torque measurement device is required to determine proper installation.
  • Correct installation is achieved only when the anchor is installed using the appropriate torque for the particular soil and anchor type.
  • Installation torque is usually measured using a device connected in series with the wrench, digger, and Kelley Bar during installation.

Our Price: $135.47
MSI D10426  8" TWIN SOLID SQUARE HUB HELIX POWER DRIVEN ANCHOR 1-3/8" HUB - 6000 FT. LB. FOR 3/4" AND 1" RODS *8" TWIN SOLID SQUARE HUB HELIX POWER DRIVEN ANCHOR 1-3/8" HUB - 6000 FT. LB. FOR 3/4" AND 1" RODS D8426-HUB1021636

  • Installation is performed using a power digger. An anchor wrench fits over the square hub and a torque measurement device is required to determine proper installation.
  • Correct installation is achieved only when the anchor is installed using the appropriate torque for the particular soil and anchor type.
  • Installation torque is usually measured using a device connected in series with the wrench, digger, and Kelley Bar during installation.

Our Price: $126.19
SALE Price: $98.14
You save $28.05!
2-1/2" SOCKET ANCHOR 8" 8000 FT. LB. FOR 3/4" AND 1" RODS  Allied Bolt 3521 `2-1/2" SOCKET ANCHOR 8" 8000 FT. LB. FOR 3/4" AND 1" RODS Allied Bolt 3521

2-21/2" SOCKET ANCHOR 8" 8000 FT. LB. FOR 3/4" AND 1" RODS Allied Bolt 3521.

  • Installation is performed using a drive wrench which fits into the anchor hub.
  • Proper anchor selection depends on the type of soil and guying requirements.
  • The Anchors have a 3" helix pitch.
  • Installation uses standard tools.
  • Anchors are painted with rust inhibiting blue paint after fabrication.

*To be used with 7ft 1" D100, 3.5ft 1" D10031, or D75 3/4" 12632 Pisa rods only.

Our Price: $83.43
SALE Price: $73.00
You save $10.43!
2-1/4" SOCKET ANCHOR 8"  10000 FT. LB. FOR 3/4" AND 1" RODS Allied Bolt 3511 `2-1/4" SOCKET ANCHOR 8" 10000 FT. LB. FOR 3/4" AND 1" RODS Allied Bolt 3511

2-1/4" SOCKET ANCHOR 8" 10000 FT. LB. FOR 3/4" AND 1" RODS Allied Bolt 3511.

  • Installation is performed using a drive wrench which fits into the anchor hub.
  • Proper anchor selection depends on the type of soil and guying requirements.
  • The Anchors have a 3" helix pitch.
  • Installation uses standard tools.
  • Anchors are painted with rust inhibiting blue paint after fabrication.

To be used with 7ft 1" D100, 3.5ft 1" D10031, or D75 3/4" 12632 Pisa rods only.

Our Price: $76.64
SALE Price: $63.12
You save $13.52!
2-1/4" SOCKET ANCHOR 8" 8000 FT. LB. FOR 3/4" AND 1" RODS Allied Bolt 3501 `2-1/4" SOCKET ANCHOR 8" 8000 FT. LB. FOR 3/4" AND 1" RODS Allied Bolt 3501

2-1/4" SOCKET ANCHOR 8" 8000 FT. LB. FOR 3/4" AND 1" RODS Allied Bolt 3501.

  • Installation is performed using a drive wrench which fits into the anchor hub.
  • Proper anchor selection depends on the type of soil and guying requirements.
  • The Anchors have a 3" helix pitch.
  • Installation uses standard tools.
  • Anchors are painted with rust inhibiting blue paint after fabrication.

To be used with 7ft 1" D100, 3.5ft 1" D10031, or D75 3/4" 12632 Pisa rods only.

Our Price: $76.64
SALE Price: $63.12
You save $13.52!
1-1/2” SINGLE SOLID SQUARE HUB ANCHOR 10" HELIX POWER HUB ANCHOR – 7000 FT-LB INSTALLATION TORQUE H-D1104-7 1-1/2” SQUARE HUB ANCHOR – 7,000 FT-LB 10" INSTALLATION TORQUE H-D1104-7

1-1/2” SINGLE SOLID SQUARE HUB ANCHOR 10" HELIX POWER HUB ANCHOR – 7000 FT-LB

  • Installation is performed using a power digger. An anchor wrench fits over the square hub and a torque measurement device is required to determine proper installation.
  • Correct installation is achieved only when the anchor is installed using the appropriate torque for the particular soil and anchor type (see reference charts).
  • Proper anchor selection depends on the type of soil and guying requirements.
  • Installation torque is usually measured using a device connected in series with the wrench, digger, and Kelly Bar during installation.
*To be used with 7ft 1" D100, 3.5ft 1" D10031, or D75 3/4" 12632 Pisa rods only.

Our Price: $73.57
1-1/2" SINGLE SOLID SQUARE HUB ANCHOR 10" HELIX POWER HUB ANCHOR – 8000 FT-LB 1-1/2” SQUARE HUB ANCHOR 10" 8000 FT-LB INSTALLATION TORQUE H-D1104-8/Allied

1-1/2" SINGLE SOLID SQUARE HUB ANCHOR 10" HELIX POWER HUB ANCHOR – 8000 FT-LB

  • Installation is performed using a power digger. An anchor wrench fits over the square hub and a torque measurement device is required to determine proper installation.
  • Correct installation is achieved only when the anchor is installed using the appropriate torque for the particular soil and anchor type (see reference charts).
  • Proper anchor selection depends on the type of soil and guying requirements.
  • Installation torque is usually measured using a device connected in series with the wrench, digger, and Kelly Bar during installation.
*
To be used with 7ft 1" D100, 3.5ft 1" D10031, or D75 3/4" 12632 Pisa rods only.

Our Price: $73.57
1-1/2” SINGLE SOLID SQUARE HUB ANCHOR – 5,500 FT-LB INSTALLATION TORQUE 1-1/2” SQUARE HUB ANCHOR 14" 5,500 FT-LB INSTALLATION TORQUE H-D1134

1-1/2” SINGLE SOLID SQUARE HUB ANCHOR 14" HELIX POWER HUB ANCHOR – 5,500 FT-LB

  • Installation is performed using a power digger. An anchor wrench fits over the square hub and a torque measurement device is required to determine proper installation.
  • Correct installation is achieved only when the anchor is installed using the appropriate torque for the particular soil and anchor type (see reference charts).
  • Proper anchor selection depends on the type of soil and guying requirements.
  • Installation torque is usually measured using a device connected in series with the wrench, digger, and Kelly Bar during installation.
*To be used with 7ft 1" D100, 3.5ft 1" D10031, or D75 3/4" 12632 Pisa rods only.

Our Price: $119.97
SALE Price: $93.31
You save $26.66!
1-1/2" SINGLE SOLID SQUARE HUB ANCHOR 8" HELIX POWER HUB ANCHOR – 7000 FT-LB INSTALATION TORQUE H-D184-7 1-1/2” SQUARE HUB ANCHOR 8" 7,000 FT-LB INSTALLATION TORQUE H-D184-7

1-1/2" SINGLE SOLID SQUARE HUB ANCHOR 8" HELIX POWER HUB ANCHOR – 7000 FT-LB

  • Installation is performed using a power digger. An anchor wrench fits over the square hub and a torque measurement device is required to determine proper installation.
  • Correct installation is achieved only when the anchor is installed using the appropriate torque for the particular soil and anchor type (see reference charts).
  • Proper anchor selection depends on the type of soil and guying requirements.
  • Installation torque is usually measured using a device connected in series with the wrench, digger, and Kelly Bar during installation.
*To be used with 7ft 1" D100, 3.5ft 1" D10031, or D75 3/4" 12632 Pisa rods only.

Our Price: $59.74
1-3/8” SQUARE HUB ANCHORS – 6,000 FT-LB. INSTALLATION TORQUE H-D84-6 1-3/8” SQUARE HUB ANCHORS 8" 6,000 FT-LB. INSTALLATION TORQUE H-D84-6

1-3/8” SQUARE HUB ANCHORS – 6,000 FT-LB. INSTALLATION TORQUE

  • Installation is performed using a power digger. An anchor wrench fits over the square hub and a torque measurement device is required to determine proper installation.
  • Correct installation is achieved only when the anchor is installed using the appropriate torque for the particular soil and anchor type (see reference charts).
  • Proper anchor selection depends on the type of soil and guying requirements.
  • Installation torque is usually measured using a device connected in series with the wrench, digger, and Kelly Bar during installation.
*To be used with 7ft 1" D100, 3.5ft 1" D10031, or D75 3/4" 12632 Pisa rods only.

Our Price: $55.31
SALE Price: $43.02
You save $12.29!
2-1/2” TURBO DRIVE SOCKET ANCHOR 10" HELIX POWER HUB ANCHOR – 15,000 FT-LB FOR 3/4" AND 1" RODS H-TD250-104 2-1/2” TURBO DRIVE SOCKET ANCHOR 10" HELIX POWER HUB ANCHOR – 15,000 FT-LB FOR 3/4" AND 1" RODS H-TD250-104

2-1/2” TURBO DRIVE SOCKET ANCHOR 10" HELIX POWER HUB ANCHOR – 15,000 FT-LB FOR 3/4" AND 1" RODS

  • Installation is performed using a drive wrench which fits into the anchor hub.
  • Proper anchor selection depends on the type of soil and guying requirements.

*To be used with 7ft 1" D100, 3.5ft 1" D10031, or D75 3/4" 12632 Pisa rods only..

Our Price: $100.59
2-1/4" TURBO DRIVE SOCKET ANCHOR 10" HELIX POWER HUB ANCHOR – 10,000 FT-LB FOR 3/4" AND 1" RODS H-TD225-104 2-1/4" TURBO DRIVE SOCKET ANCHOR 10" HELIX POWER HUB ANCHOR – 10,000 FT-LB FOR 3/4" AND 1" H-TD225-104

2-1/4" TURBO DRIVE SOCKET ANCHOR 10" HELIX POWER HUB ANCHOR – 10,000 FT-LB FOR 3/4" AND 1" RODS

  • Installation is performed using a drive wrench which fits into the anchor hub.
  • Proper anchor selection depends on the type of soil and guying requirements.

*To be used with 7ft 1" D100, 3.5ft 1" D10031, or D75 3/4" 12632 Pisa rods only.

Our Price: $78.80
2-1/4" TURBO DRIVE SOCKET ANCHOR – 10,000 FT-LB FOR 3/4" AND 1" RODS H-TD225-84/ALL3511 2-1/4" TURBO DRIVE SOCKET ANCHOR 8" HELIX POWER HUB ANCHOR – 10,000 FT-LB FOR 3/4" AND 1" RODS H-TD225-84/ALL3511

2-1/4" TURBO DRIVE SOCKET ANCHOR – 10,000 FT-LBFOR 3/4" AND 1" RODS – 3/8" THICK HELIX

  • Installation is performed using a drive wrench which fits into the anchor hub.
  • Proper anchor selection depends on the type of soil and guying requirements.

*To be used with 7ft 1" D100, 3.5ft 1" D10031, or D75 3/4" 12632 Pisa rods only.

Our Price: $76.64
SALE Price: $61.88
You save $14.76!
Anchor, Tool, Shear Pins-50lbs Hubbell C3030045/S Anchor, Tool, Shear Pins-50lbs Hubbell C3030045

HUBBELL C3030045/S Shear Pin 50lbs (SURPLUS)
Pin for Shear Torque Indicator. Sold Each

To be use with PISA® Anchor Rod 1" X 7' D100 PISA® Anchor Rod 1" x 3' 1/2" or PISA® Anchor Rod 3/4" x 7' D75 Only.

Our Price: $1.03
2-1/4" SOCKET ANCHOR 10" 8000 FT. LB. FOR 3/4" AND 1" RODS Hubbell C1025205 Anchor, Tough One, 10in, 8,000 ft-lb rating, 2.25in hub,1in threads Hubbell C1025205

2-1/4" SOCKET ANCHOR 10" 8000 FT. LB. FOR 3/4" AND 1" RODS

Tough One Anchor Helix, 8,000 Ft Lbs (10,848 N-M), 10" (254 mm) Helix for use with 0.75" (19.1 mm) or 1" (25.4 mm) Rod.

  • Installed with Chance anchor wrench C1021583
  • The anchor's sloped lead point improves penetration and helps soil flow from below the hub to above the anchor.
  • 1" threads to fit 3/4" and 1" diameter Pisa rod
  • Anchors are painted with a black paint

Our Price: $80.14
8" SOCKET ANCHOR 8000 FT. LB. FOR 3/4" AND 1" RODS Hubbell C1025204 Anchor, Tough One, 8in, 8,000 ft-lb rating, 2.25in hub,1in threads Hubbell C1025204

2-1/4" SOCKET ANCHOR 8" 8000 FT. LB. FOR 3/4" AND 1" RODS

Tough One Anchor Helix, 8,000 Ft Lbs (10,848 N-M), 8" (203 mm) Helix for use with 0.75" (19.1 mm) or 1" (25.4 mm) Rod.

  • Installed with Chance anchor wrench C1021583
  • The anchor's sloped lead point improves penetration and helps soil flow from below the hub to above the anchor.
  • 1" threads to fit 3/4" and 1" diameter Pisa rod
  • Anchors are painted with a black paint

Our Price: $76.64
SALE Price: $61.88
You save $14.76!
Little Beaver 9051-GHLB Adaptor with 7/8" Square Drive for Groundhog Augers MANTA 9051-GHLB Little Beaver Adaptor with 7/8" Square Drive for Groundhog Augers

This adaptor adapts Little Beaver earth drills to Groundhog brands of augers. Features a 7/8" square drive connection.

Earth Drills

Our Price: $113.50
Little Beaver 30272 Adaptor, with Hardware, Keyed Shaft to Auger MANTA LB 30272 Little Beaver Adaptor Keyed Shaft to Auger w/Hardware for Groundhog Augers

Little Beaver Adaptor, with Hardware, Keyed Shft to Auger


Earth Drills

Our Price: $96.75
MANTA LB-30322 Little Beaver Utility Anchor Adaptor (Fits into #30272) MANTA LB-30322 Little Beaver Utility Anchor Adaptor (Fits into #30272)

Driving utility anchors is made easier with this special adaptor. With Little Beaver’s anchor handle, hydraulic earth drill and torque tube, one-man installation of utility anchors is now possible. (60 RPM only)

Our Price: $120.00
Pisa Anchor  Rod 1" X 7' H-D100 PISA® Anchor Rod 1" X 7' D100

PISA® Anchor Rod 1" X 7' 36,000lb Tensile Strenght

Chance introduced this system of utilizing the power of digging equipment to install screw anchors. The system consists of a screw anchor, anchor rod and a special installing wrench. Each anchor has a galvanized steel threaded anchor rod with an upset hex; single or twin helices and a galvanized guy wire nut which is screwed to the anchor rod end. PISA anchors can be installed in a matter of minutes.

Use with MR1 MR2MRSR Manta Ray or Power Drive Anchor Only.
Use with 1" EYENUT for-Pisa-Rod only J12585-D6567 or with 1" Thimble Eyenut J16512-ALL5095

Our Price: $59.50
SALE Price: $46.58
You save $12.92!
Thimble Eyenut 1" J16512-ALL5095 Single Thimble Eyenut 1" J16512-ALL5095 for 1" Hardware or D100 Pisa Rods

3/4" AND 1" SINGLE EYE NUT FOR HELICAL ANCHORS

Thimble eyenuts are tapped to fit 1" hot dip galvanized bolts made to ANSI Specifications and are designed to develop strength ratings consistent with the bolts with which they are used.

*Can be use with 1" Hardware or PISA® Anchor Rod 1" X 7' D100 PISA® Anchor Rod 3/4" x 7' D75

Our Price: $7.97
Triple Eyenut  1" J12585-KOR3127 Triple Eyenut 1" J12585

3/4" AND 1" TRIPLE EYE NUT FOR HELICAL ANCHORS

Eye nuts are forged from strength 1045 steel. Hot dip galvanized to meet ASTM Specification A153 class C. For Anchor rods only. Anchor Rod eyenut H-J12585-D6567-for-Pisa-Rod Hubbell 12585 Anchor Pisa Nut Tripleye Allied Bolt 5043 Triple eye nut

Use Only with PISA® Anchor Rod 1" X 7' D100 PISA® Anchor Rod 1" x 3' 1/2" w/Coupler D10031/2
Or PISA® Anchor Rod 3/4" x 7' D75 and Manta Ray Anchors

Our Price: $12.03
   
 
1