Submit Search
Toggle mobile menu
FREE! 2024 CALENDAR
1-1/2” SINGLE SOLID SQUARE HUB ANCHOR 10" HELIX POWER HUB ANCHOR – 7000 FT-LB
1-1/2" SINGLE SOLID SQUARE HUB ANCHOR 10" HELIX POWER HUB ANCHOR – 8000 FT-LB
1-1/2" SINGLE SOLID SQUARE HUB ANCHOR 8" HELIX POWER HUB ANCHOR – 7000 FT-LB
1-3/8” SQUARE HUB ANCHORS – 6,000 FT-LB. INSTALLATION TORQUE
HUBBELL C3030045/S Shear Pin 50lbs (SURPLUS) Pin for Shear Torque Indicator. Sold Each
To be use with PISA® Anchor Rod 1" X 7' D100 PISA® Anchor Rod 1" x 3' 1/2" or PISA® Anchor Rod 3/4" x 7' D75 Only.
2-1/4" SOCKET ANCHOR 10" 8000 FT. LB. FOR 3/4" AND 1" RODS
Tough One Anchor Helix, 8,000 Ft Lbs (10,848 N-M), 10" (254 mm) Helix for use with 0.75" (19.1 mm) or 1" (25.4 mm) Rod.
PISA® Anchor Rod 1" X 7' 36,000lb Tensile Strenght Chance introduced this system of utilizing the power of digging equipment to install screw anchors. The system consists of a screw anchor, anchor rod and a special installing wrench. Each anchor has a galvanized steel threaded anchor rod with an upset hex; single or twin helices and a galvanized guy wire nut which is screwed to the anchor rod end. PISA anchors can be installed in a matter of minutes. Use with MR1 MR2MRSR Manta Ray or Power Drive Anchor Only.Use with 1" EYENUT for-Pisa-Rod only J12585-D6567 or with 1" Thimble Eyenut J16512-ALL5095
3/4" AND 1" SINGLE EYE NUT FOR HELICAL ANCHORSThimble eyenuts are tapped to fit 1" hot dip galvanized bolts made to ANSI Specifications and are designed to develop strength ratings consistent with the bolts with which they are used.*Can be use with 1" Hardware or PISA® Anchor Rod 1" X 7' D100 PISA® Anchor Rod 3/4" x 7' D75
3/4" AND 1" TRIPLE EYE NUT FOR HELICAL ANCHORS Eye nuts are forged from strength 1045 steel. Hot dip galvanized to meet ASTM Specification A153 class C. For Anchor rods only. Anchor Rod eyenut H-J12585-D6567-for-Pisa-Rod Hubbell 12585 Anchor Pisa Nut Tripleye Allied Bolt 5043 Triple eye nut Use Only with PISA® Anchor Rod 1" X 7' D100 PISA® Anchor Rod 1" x 3' 1/2" w/Coupler D10031/2 Or PISA® Anchor Rod 3/4" x 7' D75 and Manta Ray Anchors