Used in conjunction with buckles (part no. 1072) to support cables from strand. abstrap reels are uncut 50 foot lengths of plastic lashing strap. no sharp edges for installer to cut hands on while tensioning. the strapping is housed in a plastic reel that makes dispensing easy. Highly resistant to both UV (ultra violet) light and weather changes. High tensile strength after fastening.

BAND-IT® Ear-Lokt Buckles can be used with BAND-IT® Giant Band for superior fastening strength.

• 201 stainless steel offers good resistance to oxidation and many moderate corrosive agents
• Provides maximum strength
• Giant style buckle for use with 1 1/4" Band
• Installed with the C00369 Heavy Duty BAND-IT® Tool or G40269 Giant Tool
• Ear-Lokt style buckle for heavy duty applications, can hold a single or double wrapped band configuration

BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!

EASY SCALE®, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp.

Giant Band can be formed into a single or double wrapped clamp configuration, and offers the widest and thickest band to provide maximum strength.

• Produced with 201 Stainless Steel in a shiny finish
• Offers good resistance to oxidation and many moderate corrosive agents

BAND-IT Ear-Lokt Buckles can be used with many types of stainless-steel banding providing superior fastening strength. 100 box

• Ear-Lokt style buckle for standard duty applications including hose assemblies, cable bundling and general fastening,
• 201 Stainless Steel offers good resistance to oxidation and many moderate corrosive agents
• Can hold a single or double wrapped band configuration
• Band clamps can be formed over any contour or shape

BAND-IT® Ear-Lokt Buckles can be used with BAND-IT® Giant Band for superior fastening strength.

• 201 stainless steel offers good resistance to oxidation and many moderate corrosive agents
• Provides maximum strength
• Giant style buckle for use with 1 1/4" Band
• Installed with the C00369 Heavy Duty BAND-IT® Tool or G40269 Giant Tool
• Ear-Lokt style buckle for heavy duty applications, can hold a single or double wrapped band configuration

BAND-IT Ear-Lokt Buckles can be used with many types of stainless-steel banding providing superior fastening strength. 100 box

• Ear-Lokt style buckle for standard duty applications including hose assemblies, cable bundling and general fastening
• 201 Stainless Steel offers good resistance to oxidation and many moderate corrosive agents
• Can hold a single or double wrapped band configuration
• Band clamps can be formed over any contour or shape
• Can be applied on BAND-IT® band with the following BAND-IT® tools: C00169, C00369, C07569

BAND-IT 201 Stainless Steel Band 5/8" X 100' BAND-C20599STANDARD BOX

The G40269 is the strongest BAND-IT hand tool. This tool is designed for use with ¾", 1", 1-¼" width X .044" thick Giant Band & Buckle. Tool will tension beyond the limits of the 5500 lbs of force to yield 201 Stainless Steel Giant Band material.

BAND-IT's standard tool for use on band widths of 1/4" to 3/4" (.015" - .030" thickness). Drop forged tool with built in cutter, spring loaded gripper lever improves ease of use

Heavy Duty Banded Guy Attachment Cast Steel for 1-1/4" Banding.

Banded guy used With 1-1/4" band Two buckles required for all banded brackets and attachments

Aluma-form BGA-S25 Extra-Heavy Duty Banded Guy attachment with Clevis

ALUM BAB-5848 Single band 48" & Buckle 1-1/4 Two buckles required for all banded brackets and attachments

Banding & buckle 3/4" X 48" Aluma-Form BAB-3848. Two buckles required for all banded brackets and
attachment.

Allied Bole part # 2409, .044" x 1-1/4" Giant Band 201 Stainless Steel Banding. Average breaking strength is 5,500 lbs, strapping easily accessed from dispensing carton.

Aluma-Form band used to wrap around poles to hold attachments 10ft length. 1 1/4" wide 100ft length. Without drilling holes, Bolt-A-Band features a pre-cut, high quality stainless steel band with accompanying installation hardware. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required.
Two buckles required for all band brackets and attachments.

Aluma-Form band used to wrap around poles to hold attachments 100ft length. 3/4" wide x .30 x 100ft length. Without drilling holes, Bolt-A-Band features a pre-cut, high quality stainless steel band with accompanying installation hardware. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required.
Two buckles required for all band brackets and attachments.

Bolt Clamp Used to hold together banding around pole with hardware attached without drilling holes. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required. Two buckles required for all banded brackets and attachments

Bolt Clamp Used to hold together banding around pole with hardware attached without drilling holes. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required.
Two buckles required for all band brackets and attachments.

ALU 6B-ASO-8 Double Banded Standoff Bracket,-WayTslot Band 6"riser8"wide Double Banded Only no thru-bolt No holes for thru-bolt or lags. Used in Heavy duty pole applications.
Banding and Two buckles required for all band brackets and attachments. These items must be purchased separately.

Mounting bracket 14" X 5" with two 5/8" carriage bolts and nuts.
Two buckles required for all band brackets and attachments.

General purpose mount D-4080-BS1, 10"X5" with 5/8 carriage bolt and nut. Two buckles required for all banded brackets and attachments.

Mounting bracket of 3/4” Galvanized
Steel, 10” x 5” formed channel with
21/2” legs. 13/16” mounting hole.

All purpose mounting bracket used only on 1-1/4 banding with a 5/8" x 3" bolt. Longer bolt used for attachments. Example would be a bitch clamp. Two buckles required for all banded brackets and attachments

BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!

BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!

BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!

BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!

It Straps On, Blackened Stainless Steel Buckle, Ear-Lokt Style

• Finish: Blackened
• Thickness: .070"
• With 3/4"
• Tensile Strength: 95,000 PSI Minimum

It Straps On, Stainless Steel Buckle, Ear-Lokt Style

• Finish: Stainless Steel
• Thickness: .050"
• With 5/8"
• Tensile Strength: 95,000 PSI Minimum

It Straps On, Stainless Steel Buckle, Ear-Lokt Style

• Finish: Stainless Steel
• Thickness: .070"
• With 3/4"
• Tensile Strength: 95,000 PSI Minimum

It Straps On, Stainless Steel Giant Buckle, Ear-Lokt Style (25 BOX)

• Finish: Stainless Steel
• Thickness: .098"
• With 3/4"
• Tensile Strength: 75,000 PSI Minimum

BAND-IT's standard tool for use on band widths of 1/4" to 3/4" (.015" - .030" thickness). Drop forged tool with built in cutter, spring loaded gripper lever improves ease of use

The G40269 is the strongest BAND-IT hand tool. This tool is designed for use with ¾", 1", 1-¼" width X .044" thick Giant Band & Buckle. Tool will tension beyond the limits of the 5500 lbs of force to yield 201 Stainless Steel Giant Band material.

ALU J3-CSO-6-J2 Standoff Mount. Rises 2" off the pole and is 6" wide Includes 2-way t-slot and 2" pvc pipe strap.

Standoff Mount Aluma-Form ALU J3-CSO-6-J2

Band and one buckle.

Band and one buckle.