Q683XCX Series: "X" Style Full Body Harness

• Steel climber with a replaceable unpolished gaff. Features a roomy ankle area & a triangular strap ring.
• · The 17 degree gaff angle makes this the most forgiving gaff on the market.

AERIAL LIFT EVACUATION KIT BASH-FE700SRKSC. RESCUE KIT. Kit includes 50' of 1/2" polyester line, two carabiners, descent device, & storage bag.

Bashlin's Bell Wrench Holster is made of thick, durable harness leather with a metal keeper for the wrench.  This fits all models of the Klein Bell Wrench series.

Size 9 to 11, 16" black rubber hot gloves, rated maximum usage 17,000 voltage.
Leave 1" of exposed rubber glove for every 10kV.

**MUST BE USED WITH LEATHER GLOVES TO PREVENT DEATH OR SERIOUS INJURY**

Absolutely NO REFUNDS or EXCHANGES on hot glove items. This is for potential safety and liability issues. We apologize for the inconvenience.

.

Bashlin Climber Straps are durable, pliable and comfortable. They are durable riveted and feature a protective buckle shild. The NP series straps are made of flexible coated webbing. This material has a leather-like texture and flexibility with the wear and streanth of synthetic material.

89N Series: Climber Straps

The 10S-14 is a durable canvas bag with a metal frame and hard bottom. The shorter length makes this bag ideal for carrying hand tools or a hydraulic compression tool It measures 14" long, 10" high and 7" wide.
Length: 14"
Height: 10"
Width: 7"

This bag is available in canvas or coated polyester. Designed to carry the essential items used by a lineman. It has a...

Bashlin 3006 Carabiners Screw Lock Steel 5" OAL with 1 1/4" opening

• Bashlin's carabiners are rated at a minimum of 5000 lb.
• *OAL is overall length*

They are double riveted and feature a protective buckle shield. Available in neoprene nylon or bioplastic coated webbing that has a leather like texture and flexibility with the wear and strength of synthetic material.

Bashlin's V Climber pads eliminate straps and buckles for easy donning and have a comfortable wrap around padding for comfort. They fit most standard climbers, and are available in the standard "T" design (150V) or with a metal insert for positive climber control.

Bashlin Fall Line Rope Grab System BASH-BLF52-50
Constructed from durable stainless steel.
Designed for use on 5/8" twisted rope & a maximum lanyard length of 3'.
Moves easily up & down the line.
Features a 3" d-ring for lanyard attachment.

The Floridian 88-D21 has a Superior design and performance make this belt the industry standard. It combines a
padded, contour cushion section with flares for the two shifting D-rings and 5 1/2" back. This belt gives excellent support and climbing comfort.
Size:36-44, to obtain the correct D-to-D (D-ring to D-ring) size, measure around the back from hipbone
to hipbone and then add 2" (51 mm).

FREE 2021 CALENDAR

• BASHLIN 27 Nice compact design.
  Combines all the tools you need to properly care for the gaffs on your Bashlin climbers.
  Includes a gaff guage, 6" file w/ a wooden handle, sharpening stone, & instructions.
  This kit is for use on Bashlin pole gaffs

Bashlin 33L Handline Carrier

• Protection for the worker & equipment
• Fits over the tongue & buckle section of the belt
• Designed t ostraighten & drop rope

High Voltage Hot Glove Leather Protectors constructed from cowhide with a 3" cuff (12" OAL) , size 11.
**MUST BE USED WITH RUBBER GLOVES TO PREVENT DEATH OR SERIOUS INJURY**Absolutely NO REFUNDS or EXCHANGES on hot glove items. This is for potential safety and liability issues. We apologize for the inconvenience.

High Voltage Hot Glove Leather Protectors constructed from cowhide with a 5" cuff (14" OAL), size 10
**MUST BE USED WITH RUBBER GLOVES TO PREVENT DEATH OR SERIOUS INJURY**
Absolutely NO REFUNDS or EXCHANGES on hot glove items. This is for potential safety and liability issues. We apologize for the inconvenience.

The 145 Hook n' Loop pads are made with rugged woven nylon material and have a cinch type hook and....

Hot glove storage bag made of canvas for 16" gloves. Bashlin glove bags are made of heavy-duty cotton duck, double sewn. They have ventilation and drain holes in the bottom. Button snap closures and an attachment hook are standard.

Bashlin's newest belt hugs the hips and has extra D-rings for carrying a secondary lanyard. The upper D's are positioned in just the right place. The arc resistant cushion promotes cooling and ventilation. It is soft, and requires no break-in.
Bahlin 88MX4DMP: 4 D-Ring Tool Belt

• 4 D-Ring Belt
• The freedom of a single tongue
• Full floating D-saddle
• Durable 7" back
• Features a moisture wicking nylon mesh cushion

The Bashlin 140 series pads will hold the shank securely and at a slight angle for better control.  It has a soft leather inside and....

The 150 series leather pad offers comfort for both the shin and the calf.  The shank area has thick padding (150TS) or it is available with no padding at all (150T).  The leather lugs are securely riveted for long wear.

Sold in pairs

• BD14B Series Climbers have been a field proven industry leader for over 65+ years
• · Aluminum climber with a replaceable unpolished gaff
• · 30% lighter than steel climbers
• · The 17 degree gaff angle makes this the most forgiving gaff on the market
• · Offset design places the gaff in the proper position for easier penetration
• · Standard Bashlin climbers include #2 gaff guard & #5 gaff gauge
• · Sold in pairs

• BD14B Series Climbers have been a field proven industry leader for over 65+ years
• · Aluminum climber with a replaceable unpolished gaff
• · 30% lighter than steel climbers
• · The 17 degree gaff angle makes this the most forgiving gaff on the market
• · Offset design places the gaff in the proper position for easier penetration
• · Standard Bashlin climbers include #2 gaff guard & #5 gaff gauge
• · Sold in pairs

• BD16BC Series Climbers have been a field proven industry leader for over 65+ years
• · Aluminum climber with a replaceable unpolished gaff
• · 30% lighter than steel climbers
• · The 17 degree gaff angle makes this the most forgiving gaff on the market
• · Offset design places the gaff in the proper position for easier penetration
• · Standard Bashlin climbers include #2 gaff guard & #5 gaff gauge
• · Sold in pairs

• For use w/ Bashlin climbers only. Use the gaff guage to maintain the correct shape, taper, & profile of your gaffs.
• Instructions included.

Bashlin 2 Gaff Guard

• Constructed from the highest quality Russet leather with a hook and loop attachment
• Helps keep the gaff sharp and protects the user from scratches and punctures wounds.
• Not only reduces damage to the user but also to the gaff.
• Sold in pairs

• Double backed design for added strength & durability, with russet leather pockets.
• Five pockets with a knife snap; fits a screwdriver, a rule, linemen/slip pliers, & a wrench.
• A two piece screw rivet set is included for securing to a belt
• Left hand
• Black leather

The 14p gaff allows any pair of Bashlin replaceable gaff climbers to preform better on CCA trated wood poles.The polished gaff penetrates deeper into the pole without sacrificing the correct shape. They can also be used in softer wood with Penta or Creosote treatment.

Bashlin's replacement gaffs are available for pole climbers. New screws for replacement are included.

The Wrangler 1511N has a 5" cushion section, a neoprene nylon back, and a 6 ply tongue and buckle section. It is lightweight with two fixed S-shaped "D" rings for gut strap attachment, tape sling, knife snap, glove bag ring and hammer loop on left.

D-Size: 21-28, To obtain the correct D-to-D (D-ring to D-ring) size, measure around the back from hipbone to hipbone
and then add 2".


Lineman Tool Belt Bashlin 1511N-D20

The Wrangler 1511N has a 5" cushion section, a neoprene nylon back, and a 6 ply tongue and buckle section. It is lightweight with two fixed S-shaped "D" rings for gut strap attachment, tape sling, knife snap, glove bag ring and hammer loop on left. To obtain the correct D-to-D (D-ring to D-ring) size, measure around the back from hipbone to hipbone and then add 2".

BASH-1511N-D30-D32

Constructed from the highest quality 3/4" russet leather

Bashlin's tool boards are made of ABS. This light, durable material does not fray or flake and has superior cold weather....

The 111HLS is our most popular linemen's holster. Like all Bashlin linemen's holsters, it is double backed design for added strength & durability, with russet leather pockets. It has four pockets with a knife snap; fits a screwdriver, a rule, & linemen/slip pliers. A two piece screw rivet set is included for securing to a belt.

The Bolt-Thru design allows threaded rod to pass thru the socket so that nuts can be secured on any threaded length. 3/4" x 1" x 1-1/8" squares....

Dual End Lineman Wrench 12" Lowell 103TDE
Triple Dual End Ratcheting Lineman Wrench.
Lineman's Wrenches for high line utility pole installation and repair.

The Bolt-Thru design allows threaded rod to pass thru the socket so that nuts can be secured on any threaded length. 3/4" x 1" x 1-1/8" squares....

Standard 10" Handle. The Bolt-Thru design allows threaded rod to pass thru the socket so that nuts can be secured on....

The Bolt-Thru design allows threaded rod to pass thru the socket so that nuts can be secured on any threaded length. 3/4" x 1" x 1-1/8" squares....

Bashlin 76PAT Patriot Wood Pole Fall Restraint Device 6" - 20"
The Patriot is here to free you from the tyranny and restrictions of other WPFRD's

• It is lightweight, at least 20% lighter than competitive product

• Ergonomic approved design reduces upper body strength

• Allows proper body position and leg placement when climbing

• 76PAT, 6" - 20" Pole Diameter

Bashlin 76PAT-T Patriot Wood Pole Fall Restriction Device - Transmission Model 6" - 30" Dia.
The Patriot is here to free you from the tyranny and restrictions of other WPFRD's.

• It is lightweight, at least 20% lighter than competitive product

• Ergonomics approved design reduces upper body strength

• Allows proper body position and leg placement when climbing a pole

• 76PAT-T, 6" - 20" Pole Diameter

Bashlin's 2011P-36 heavy duty 36" pole sling is designed for easy use with a shotgun stick 3' pole sling with all hardware.

• Constructed from 1 3/4" nylon web.
• · Features 2 O-Rings
• · Designed so the one O-ring will pass through the other O-ring for easy application.
• · Stocked lengths are 36" & 48".
• · Other lengths are available, contact us for ordering information.

Bashlin's 2011P-48 heavy duty 48" pole sling is designed for easy use with a shotgun stick 4' pole sling with all hardware.
Constructed from 1 3/4" nylon web.

• · Features 2 O-Rings
• · Designed so the one O-ring will pass through the other O-ring for easy application.
• · Stocked lengths are 36" & 48".
• · Other lengths are available, contact us for ordering information.

Bashlin's 2011P-72 heavy duty 72" pole sling is designed for easy use with a shotgun stick 6' pole sling with all hardware.
Constructed from 1 3/4" nylon web.

• · Features 2 O-Rings
• · Designed so the one O-ring will pass through the other O-ring for easy application.
• · Stocked lengths are 36" & 48".
• · Other lengths are available, contact us for ordering information.

Bashlin's 6' pole strap leather straps features a nylon insert. The stitching is deeply imbedded in the leather for longer wear.
· Constructed from latigo leather that is pliable yet durable.
· Features a tongue & buckle adjustment.
· Has deeply embedded stitches for longer wear.
· Nylon webbing is sandwiched between the leather for added strength.

Bashlin's 7' pole strap leather straps features a nylon insert. The stitching is deeply imbedded in the leather for longer wear.
· Constructed from latigo leather that is pliable yet durable.
· Features a tongue & buckle adjustment.
· Has deeply embedded stitches for longer wear.
· Nylon webbing is sandwiched between the leather for added strength.

These slide adjustors fit only Bashlin BD14 style climbers. They are avialiable in for 15-18 or 18-21 inch adjustment, and are sold in pairs.

Bashlin's 2000 Series Lanyards are for fall arrest applications. They feature forged hardware and meet the ANSI and OSHA requirements.
1" Nylon Web with B-Lan and 1-1234 rope snaphooks

2306 Series: Stretchable Polyester Shock Absorbing Core Lanyard.
Bashlin's 2000 Series Lanyards are for fall arrest applications. They feature forged hardware and meet the ANSI and OSHA requirements

Standard Hot Glove cotton liner. Constructed from cotton with a 10" OAL. One size fits all, machine washable. SOLD AS A PAIR

Steel climber Bashlin BD16BCA-5N.
Steel climber w/ a replaceable unpolished gaff. Features a roomy ankle area & a triangular strap ring.
Has a twisted shank so it lays flat against the leg & adds comfort. Sold in pairs.

16-20YB Series: Class 2 Rubber Glove, Size 9 to 11, 16" black rubber hot gloves, rated maximum usage 17,000 voltage. Leather PROTECTOR GLOVES should be worn over rubber gloves.

**MUST BE USED WITH LEATHER GLOVES TO PREVENT DEATH OR SERIOUS INJURY**

Absolutely NO REFUNDS or EXCHANGES on hot glove items. This is for potential safety and liability issues. We apologize for the inconvenience.