Cablematic Security Shield Tool for use with 7/16 inch hex shielded ‘F’ connectors.

Combination tool cores and strips in one fast and precise operation. Manual or drill operation; CST tools have a standard “T” handle....

Used on Corning Gilbert GTP; PCT International TPG; PDI Incorporated PTP-59, PTP-59LR, PTP-59-PB; PPC LFT & PST; Signal Vision, Inc.

Cable Pro TRS716/*40 Torque Wrench F Connector Set to 40 inch pounds Use to torque 7/16" F-fittings. This tool was designed to work easily with multipart taps. We preset your TRS716 Torque Wrench in our factory to 40 inch lbs. The TRS716 is manufactured by Belden in the USA. Belden has bought out Cable Pro. Don't be fooled by other sellers that are selling knockoffs from China that are inferior tools. USED

For removing residual dielectric from the conductor of all sizes of trunk and distribution cables....

Small Body Design that allows cable preparation of 59, 6, 7 and 11 coax cable (std, tri and quad) without any adjustment or blade cassette change out....

New Single Drop Trimmer for Times Fiber Communications (TFC) “Flexible Feeder” ....

Combination tool cores and strips in one fast and precise operation. Manual or drill operation; CST tools have a standard “T” handle....

Combination coring tool strips in one fast and precise operation. Manual or drill operation; CST tools have a standard “T” handle with a built-in 3/8 in. (9.5 mm) drill adapter; CST-R tools have a ratchet “T” handle and a separate 3/8 in. (9.5 mm) drill adapter. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced without the expense of replacing the entire coring bit.

The CST-625 features manual or drill operation with a standard "T" handle and a built in 3/8" drill adapter.
It also features a heat treated, sheath cutting blade that produces a smooth beveled edge and can be replaced
without the expense of replacing the entire coring bit.

Manual or drill operation; CST tools have a standard “T” handle with ratchet “T” handle
and a separate 3/8 in. (9.5 mm) drill adapter.
Heat treated sheath cutting blade produces a smooth beveled edge and
can be replaced without the expense of replacing the entire coring bit.

Combination tool cores and strips in one fast and precise operation. Manual or drill operation; CST tools have a standard “T” handle....

CST-700TX from Ripley is specifically designed to Core and Strip Times Fiber TX and CommScope P3 Cables.
This tool features manual or drill operation with a standard "T" handle and a built in 3/8" drill adapter.
Features a heat treated, sheath cutting blade that produces a smooth beveled edge and can be replaced without
the expense of replacing the entire coring bit.

CST-840TX from Ripley is specifically designed to Core and Strip Times Fiber TX and CommScope P3 Cables.
This tool features manual or drill operation with a standard "T" handle and a built in 3/8" drill adapter.
Features a heat treated, sheath cutting blade that produces a smooth beveled edge and can be replaced without
the expense of replacing the entire coring bit.

Specifically designed for Trilogy MC2 cables. Manual or drill operation;

Manual or drill operation; CST tools have a standard "T" handle with a built-in 3/8 inch (9.5 mm) drill adapter
Double helix coring bit designed for fast and precise coring and stripping of polyethylene disc/air dielectric cable
Heat treated, sheath cutting blade produces a smooth, beveled edge and can be replaced without the expense of replacing the entire coring bit
Use of CC-100 or CC-200 Center Conductor Cleaner/Scraper removes residual dielectric which remains on the conductor after coring and stripping
PART # RIP CST-MC 500

Specifically designed for Trilogy MC2 cables. Manual or drill operation;

The CST-625/50 is a Coring and Stripping tool that has the
ability to be used with Commscope &Times Fiber 50 Ohm cable.
part#35945

Combination coring tool strips in one fast and precise operation. Manual or drill operation; CST tools have a standard “T” handle....

Specifically designed for Trilogy MC2 cables. Manual or drill operation;

For Times Fiber Communications (TFC) “Flexible Feeder” (TX10-15 Low Loss Drop Feeder) Cable.....

For Times Fiber Communications (TFC) “Flexible Feeder” (TX10-15 Low Loss Drop Feeder) Cable.
Color coded and labeled for ease of proper tool identification. Green - TXFF for Standard cable construction.
Blue – TXFF-Q for Quad Shield cable construction. The first cut will prepare cable to proper center conductor length.
The second cut will remove the proper length of outer jacket exposing the braid.

Model Color Cable Connector Part No.

Combination tool cores and strips in one fast and precise operation. Manual or drill operation; CST tools have a standard “T” handle....

AJST is designed to remove the outer jacket and armor layer on CommScope P3 JACASS and QR JACASS underground construction trunk and distribution cable.

AJST is designed to remove the outer jacket and armor layer on CommScope P3 JACASS and QR JACASS underground construction trunk and distribution cable.

AJST is designed to remove the outer jacket and armor layer on CommScope P3 JACASS and QR JACASS underground construction trunk and distribution cable.

The CST 875-R(ratchet) is used for Commscope, P1, P3 Cable Guard Cable; Time Fiber T4, T6, T10 Cable.
Combination tool cores and strips in one fast and precise operation.
Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.

AJST is designed to remove the outer jacket and armor layer on CommScope P3 JACASS and QR JACASS underground construction trunk and distribution cable.

AJST is designed to remove the outer jacket and armor layer on CommScope P3 JACASS and QR JACASS underground construction trunk and distribution cable.

QRT Kits include a coring and stripping tool and a jacket stripping tool.

QRT Kits include a coring and stripping tool and a jacket stripping tool.

QRT Kits include a coring and stripping tool and a jacket stripping tool.

QRT Kits include a coring and stripping tool and a jacket stripping tool.

ALL-IN-ONE, accurately strips the jacket, cores out the dielectric, strips and bevels the aluminum sheath conveniently attaches the jacket stripper body (QJST) to the main body of the coring and stripping tool by means of a "QUICK-CHANGE" rotating body ring. Jacket stripping body (QJST), when used separately to remove the jacket on flooded cable, is uniquely designed to automatically provide 3.50 inch (88.9mm) of jacket removal when rotated to the end of the body. Jacket stripper body and coring / stripping tool guide sleeve are all COLOR CODED for easy cable identification.

ALL-IN-ONE, accurately strips the jacket, cores out the dielectric, strips and bevels the aluminum sheath conveniently attaches the jacket stripper body (QJST) to the main body of the coring and stripping tool by means of a "QUICK-CHANGE" rotating body ring. Jacket stripping body (QJST), when used separately to remove the jacket on flooded cable, is uniquely designed to automatically provide 3.50 inch (88.9mm) of jacket removal when rotated to the end of the body. Jacket stripper body and coring / stripping tool guide sleeve are all COLOR CODED for easy cable identification.

QRT Kits include a coring and stripping tool and a jacket stripping tool.

ALL-IN-ONE, accurately strips the jacket, cores out the dielectric, strips and bevels the aluminum sheath.....

ALL-IN-ONE, accurately strips the jacket, cores out the dielectric, strips and bevels the aluminum sheath.....

ALL-IN-ONE, accurately strips the jacket, cores out the dielectric, strips and bevels the aluminum sheath.....

ALL-IN-ONE, accurately strips the jacket, cores out the dielectric, strips and bevels the aluminum sheath conveniently attaches the jacket stripper body (QJST) to the main body of the coring and stripping tool by means of a "QUICK-CHANGE" rotating body ring. Jacket stripping body (QJST), when used separately to remove the jacket on flooded cable, is uniquely designed to automatically provide 3.50 inch (88.9mm) of jacket removal when rotated to the end of the body. Jacket stripper body and coring / stripping tool guide sleeve are all COLOR CODED for easy cable identification.

ALL-IN-ONE, accurately strips the jacket, cores out the dielectric, strips and bevels the aluminum sheath.....

ALL-IN-ONE, accurately strips the jacket, cores out the dielectric, strips and bevels the aluminum sheath conveniently attaches the jacket stripper body (QJST) to the main body of the coring and stripping tool by means of a "QUICK-CHANGE" rotating body ring. Jacket stripping body (QJST), when used separately to remove the jacket on flooded cable, is uniquely designed to automatically provide 3.50 inch (88.9mm) of jacket removal when rotated to the end of the body. Jacket stripper body and coring / stripping tool guide sleeve are all COLOR CODED for easy cable identification.