The Jonard CableSaber™ is the ultimate tool for gaining mid-span access to armored or thick jacketed cables 4 mm-28.6 mm (0.157”-1.125”) in diameter.

This is a two pack of replacement blades for the AST-10, AST-118, and AST-200 Armored Mid Span Cable Slitting Tools.
These blades feature the following:

• Precision steel blade will cut through the toughest materials and ensure no damage to the internal fibers
• Suitable for both slitting and ringing applications

Designed to cleave either 900 µm buffered or 250 µm coated fiber, this fiber cleaver’s quick and easy three step operation is perfectly suited for mechanical splicing and quick field termination of fiber connectors.
This fiber cleaver features the following:

• Leaf spring scale is ruled to allow accurate and precise cleave lengths from 2 to 20 mm (0.079” to 0.79”)
• Ultra-strong carbide blade will last up to 6,000 cleaves before needing to be replaced
• Handles both single and multi-mode fibers with 125 µm cladding
• Replacement Parts: FC-4 Replacement Blade and FC-65 Replacement Leaf Spring

The Jonard Tools FC-500 precision fiber cleaver is designed to provide a precise cleave and prepare a fiber to be fusion spliced for 250 µm and 900 µm coated optical fiber.

The Jonard Tools FCC-120 quick click ferrule end face cleaner is designed to provide exceptional cleaning performance by cleaning MPO connectors beyond the critical fiber core area and cleaning deep into the contact area of a bulkhead adapter or connectors on fiber optic cables. The tethered dust cap provides protection for the micro fiber cleaning fabric and is an adapter for connector end face cleaning.

Featuring a patented 360° rotational tip for extra-wide cleaning, the FCC-125 Fiber Connector Cleaner provides exceptional cleaning performance on 1.25 mm ferrules in recessed fiber optic adapters or individual LC and MU connectors.
This fiber connector cleaner features the following:

• Slide-Guide™ non-slip micro tape feeder guarantees consistent cleaning
• Dual rotational tip and one-push operation makes cleaning ferrule end-faces quick and easy
• Flip-open cap makes it easy to insert connectors for cleaning
• Can be used for over 800 cleanings and has a visual indicator to see how much cleaning material is left
• Static-free housing and cleaning cloth make this tool perfect for ESD-safe work
• Great for many applications (satellite communication systems, military and civilian maritime optical networks, aviation, broadcasting and HDTV, fiber to the antenna for WiMax and cellular networks, outside plant and fiber to the home, cable television head end, data centers, telecom central offices) and crush resistant to over 250N, impact resistant to survive drops over 1.5M

Featuring a patented 360° rotational tip for extra-wide cleaning, the FCC-250 Fiber Connector Cleaner provides exceptional cleaning performance on 2.5 mm ferrules in recessed fiber optic adapters or individual FC, SC, and ST connectors.
This fiber connector cleaner features the following:

• Slide-Guide™ non-slip micro tape feeder guarantees consistent cleaning
• Dual rotational tip and one-push operation makes cleaning ferrule end-faces quick and easy
• Flip-open cap makes it easy to insert connectors for cleaning
• Can be used for over 800 cleanings and has a visual indicator to see how much cleaning material is left
• Static-free housing and cleaning cloth make this tool perfect for ESD-safe work
• Great for many applications (satellite communication systems, military and civilian maritime optical networks, aviation, broadcasting and HDTV, fiber to the antenna for WiMax and cellular networks, outside plant and fiber to the home, cable television head end, data centers, telecom central offices) and crush resistant to over 250N, impact resistant to survive drops over 1.5M

Featuring patent-pending Slide-Guide™ technology that provides stable and consistent cleaning performance, the FCC-300 universal fiber connector cleaner is the perfect tool for cleaning a large variety of fiber connectors.

Designed for use on LC and SC simplex and duplex connectors, this tool is perfect for inserting and extracting fiber optic connectors in high density patch panels.
This tool features the following:

• Bent nose jaws can be used to insert or remove simplex or duplex LC and SC connectors
• Works with LC and SC simplex and duplex connectors as well as with MU, MT-RJ, and other similar type connectors
• Spring-loaded design with dual component thermoplastic rubber TPR grips for maximum comfort and control
• Rubber protected jaws safely secure and grip connectors without damaging them

Fiber Inspection Microscope JON-FIM-200.

Designed to provide 850/1300 nm or 1310/1550 nm wavelengths, this optical light source is the perfect tool for providing a stable light source for multimode or single mode fiber measurements.

The Jonard Tools PATENTED and award-winning FOD-2000 Fiber Optic Drop Cable Slitter simplifies the slitting of drop cable jackets at mid span or end sections and is perfect for FTTH technicians working with flat fiber drop cables.
This drop cable slitter features the following:

• Designed to slit 0.250” flat drop cables as well as various other cables such as Super Essex Communications Series 6U, 6T tonable, W7, W7 tonable, 6U 24F, and 6T 24F tonable flat drop cables
• Slits flat cables 0.305" to 0.350" wide and 0.155" to 0.185" high, typically found in Corning SST-Drop flat cables with a jacket thickness of 0.03” to 0.04”
• Slits both sides of the jacket simultaneously, allowing easy access to fiber or strength members
• Can separate the jacket and strength members from the buffer tube leaving fiber undamaged
• Two reversible blades come preassembled and can be reversed when worn for double life
• Replacement Blades (FOD-RB25) can be purchased separately
• NSPE New Product Award (See below in Downloads section)

This product is a pack of 25 reversible replacement blades for the FOD-2000 Fiber Optic Drop Cable Slitter.

Designed with a 35° beveled edge and 6 mm wide carbide blade, this fiber optic scribe is the perfect tool for scribing optical fiber. This scribe features the following:

• 6 mm wide carbide steel blade can cleave large diameter fiber and miniature rod-shaped lenses
• Durable anodized aluminum housing provides a comfortable and durable grip
• Ideal for “scratch & pull” technique of scribing fiber

Designed to cut copper, aluminum, leather, plastic, and other materials, these heavy duty scissors are the perfect tool for cutting cables up to 1/4” in diameter.
These scissors feature the following:

• One blade is serrated for a tight and secure grip while cutting
• Wire stripper accommodates 12 AWG, 14 AWG and 18 AWG (2.0, 1.5 and 1.0 mm2 cross sectional area) wire
• Dual component polypropylene (PP) and thermoplastic rubber (TPR) grip for greater comfort and ergonomics
• Includes a safety locking mechanism and adjustment screw for convenience
• Not for use on stainless steel or other hardened/heat treated metals

JONARD JIC-186 - WIRE & KEVLAR CUTTING SHEARS

High carbon stainless steel blades (heat treated to HRC 58-60) designed to cut Kevlar®, cabling insulation, tape, cable ties and other material.

JONARD JIC-375 - FIBER OPTIC STRIPPER THREE HOLE

Three hole Fiber Optic Stripper model performs all common fiber stripping functions. The first hole of this Fiber Optic Stripper strips the 1.6-3 mm fiber jacket down to the 600-900 micron buffer coating.

Designed to cut microducts cleanly and straight, this microduct cutter is perfect for cutting most microducts including tubing made from PVC, Nylon, and other materials up to 14 mm (9/16") in diameter.
This microduct cutter features the following:

• Made from polypropylene with thermoplastic rubber (TPR) grips for maximum grip and comfort
• Heat treated stainless steel blade cuts through ducts with ease
• Cuts tubing up to 14 mm (9/16") in diameter

The patented MS-306 Mid Span Slit and Ring Tool is designed to provide easy access to optical fibers in outer jackets and buffer tubes. Building on the popularity of the Jonard Tools MS-6 and MS-26 Fiber Optic Mid Span Slitting Tools, we have incorporated a ring feature in the tool to make it even more versatile.

Groove Sizes:

1.2 - 1.5 mm

1.5 - 1.8 mm

1.8 - 2.1 mm

2.1 - 2.5 mm

2.5 - 2.9 mm

2.9 - 3.3 mm

1. Select the correct groove. Each groove is marked with the recommended fiber size
2. Place the fiber in the groove to be used. The arrow on the top of the MS-6 indicates blade location and pulling direction.
3. Close the tool making sure lock is engaged and pull

Designed to perform live testing with OLT equipment, this PON Power Meter with APC connectors is perfect for use during FTTx/PON service turn-up or maintenance. It is able to simultaneously test and measure the signal power of voice, data, and video connections, and is essential for the construction and maintenance of PON systems.