Type FO™ is great for cleaning glass fiber or connector end faces for better light transmission performance. Type FO™ quickly removes dust, oils, and contaminants, while leaving no residue.

Type RP™ is available in convenient pre-saturated towelettes and cable prep kits. Pre-saturated wipes are a great option for field use. The towels are durable and non-linting. The pouch package limits vapor exposure and eliminates spill and splash hazards.

New SqueekyKleen™ cleans and fans fiber in two wipes without alcohol, saving time and money. Hear the difference! No follow-up with alcohol required to get fibers squeaky clean and separated when prepping for splicing.

Polywater’s non-woven FiberKleen™ Towelettes trap dirt and absorb contaminants from fiber optic cable and optical equipment. A smooth wiping surface and durable material promote easy, effective cleaning.

Type FO™ is great for cleaning glass fiber or connector end faces for better light transmission performance. Type FO™ quickly removes dust, oils, and contaminants, while leaving no residue.

Type FO™ is great for cleaning glass fiber or connector end faces for better light transmission performance. Type FO™ quickly removes dust, oils, and contaminants, while leaving no residue.

Small Body Design that allows cable preparation of 59, 6, 7 and 11 coax cable (std, tri and quad) without any adjustment or blade cassette change out....

New SqueekyKleen™ cleans and fans fiber in two wipes without alcohol, saving time and money. No follow-up with alcohol required to get fibers squeaky clean and separated when prepping for splicing.

Type FOTM Anhydrous Isopropyl Alcohol has essentially no water content. Type FOTM is great for cleaning fiber optics and associated equipment. It quickly removes dust, oils, and contaminants, while leaving no residue.

FiberKleen™ towelette dispenser contains 175 lint-free, high-quality microfiber
towels that are used to clean ferrules, bulkheads and fiber endfaces.
The engineered design of the nonwoven, highly absorbent towel traps the dirt and debris
re-moved from ferrules, making cleaning easier and more effective. Variety of swabs also available.

For stripping 250 micron buffer coating to expose 125 micron cladded fiber
Second hole for stripping 2-3mm fiber jackets
140 µm diameter hole and V-opening in blade allows removal of 250 micron buffer coating from 125 micron fiber
Pre-set at the factory - no adjustments needed
Will not scratch or nick glass fiber
All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips
Comfort-grip, ergonomic handles
Lock to hold tool closed when it is not in use
Made in the USA
Part No.: 46107

Durable, compact & lightweight cutters engineered to cut through Kevlar® strength fibers, Return-spring mechanism & fully serrated, high-carbon steel blades provide precision cuts. Ergonomic handles feature cushioned, non-slip grips to ensure comfort.

New Single Drop Trimmer for Times Fiber Communications (TFC) “Flexible Feeder” ....

Specifically designed for Trilogy MC2 cables. Manual or drill operation;

Type FOTM Anhydrous Isopropyl Alcohol has essentially no water content. Type FOTM is great for cleaning fiber optics and associated equipment. It quickly removes dust, oils, and contaminants, while leaving no residue.

The Ripley Miller MSAT Mid-Span Access Tool can quickly and easily access fibers in 1.3 mm, 1.4 mm, 1.5 mm, 1.6 mm, 1.7 mm buffer tubes in a mid-span location without fiber damage. The tool design incorporates buffer tube size gages on the tool body for ease of selecting proper tube splitting channel. All blades are precisely factory mounted in tube slitting channels with no adjustment required by the installer. mounted in tube slitting channels with no adjustment required by the installer.

Two hole design efficiently strips away the 1.6 to 3 mm jacket or 900 micron tight buffer & 250 micron buffer coating from the 125 micron bare fiber in one compact tool that is factory-set & does not require any adjustment. Manufactured to precise tolerances, its diameter holes & V-openings in blade allow for accurate & clean stripping without scratching or nicking the bare fiber. Pivot pin, spring & precision handles with printed stripping reference enhance the functionality & durability of the tool.

Fiber Optic-Center Feed Stripper

• New fiber stripper with center feed design allows for longitudinal approach fiber stripping
• The fiber is fully supported in the stripping process of 900 micron buffer coating to 250 micron and standard 250 micron coating to 125 micron stripping

QuicKleen^™ is a unique solvent blend that cleans completely, leaves no residue, and evaporates quickly. QuicKleen Fiber EndFace Cleaner is available in a convenient 2-fl oz/60-ml spray package, and as part of an all-inclusive kit.

AquaKleen™ is a special blend of 94% pure deionized water with cleaning solvents. AquaKleen™ Cleaner is friendly to the environment, less toxic, and safer for use by humans.

Introducing the new US07 Adjustable Cable Stripper that quickly and easily end strips or midspan strips cable insulation with no conductor damage on #8 to 1000 kcmil secondary cables. The tool utilizes a size adjustment clamping system to swiftly adjust and lock onto the insulation. Its compact, low friction, thermoplastic, impact-resistant polymer v-jaw and body provides a stable and precise clamping platform in any space.

The Ripley Miller MSAT Mid-Span Access Tool can quickly and easily access fibers in 2, 2.5 and 3mm buffer tubes in a mid-span location without fiber damage. The tool design incorporates buffer tube size gages on the tool body for ease of selecting proper tube splitting channel. All blades are precisely factory mounted in tube slitting channels with no adjustment required by the installer. mounted in tube slitting channels with no adjustment required by the installer.

Fiber optic cable clamp, prepping and splicing fiber optic cables.

The Ripley Miller MSAT Mid-Span Access Tool can quickly and easily access fibers in 1.3 mm, 1.4 mm, 1.5 mm, 1.6 mm, 1.7 mm buffer tubes in a mid-span location without fiber damage. The tool design incorporates buffer tube size gages on the tool body for ease of selecting proper tube splitting channel. All blades are precisely factory mounted in tube slitting channels with no adjustment required by the installer. mounted in tube slitting channels with no adjustment required by the installer.

The OTDR 800 is the newest handheld OTDR from Ripley’s ODM® brand that provides test technicians and contractors with an all-in-one solution for testing optical reflection and loss in fiber networks.