Welded high speed steel cutting edge is sharper and larger than standard pole augers, so it cuts faster and lasts longer in dense, treated, or soaked wood.

• Diameter: 13/16"
• Flute Length: 21"
• Overall Length: 24"
• Shank Size: 7/16"

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles.

• Diameter: 1 1/16"
• Twist Length: 24"
• Overall Length: 29"
• Shank Size: 7/16"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips Extra-long twist is ideal for boring large poles.

• Diameter: - 1-1/16"
• Twist Length: 5/8"
• Overall Length: 24"
• Shank Size: 5/8"

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips Extra-long twist is ideal for boring large poles.

• Diameter: 13/16"
• Flute Length: 21"
• Overall Length: 29"
• Shank Size: 7/16

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips Extra-long twist is ideal for boring large poles.

• Diameter: 11/16"
• Twist Length: 24"
• Overall Length: 29"
• Shank Size: 7/16"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles.

• Diameter: 11/16"
• Flute Length: 21"
• Overall Length: 24"
• Shank Size: 5/8"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles.

• Diameter: 13/16"
• Flute Length: 21"
• Overall Length: 24"
• Shank Size: 7/16"

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles.

• Diameter: 9/16"
• Flute Length: 24"
• Overall Length: 29"
• Shank Size: 7/16"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles.

• Diameter: 13/16"
• Flute Length: 15"
• Overall Length: 18"
• Shank Size: 5/8"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles.

• Diameter: 13/16"
• Flute Length: 21"
• Overall Length: 24"
• Shank Size: 5/8"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles.

• Diameter: 11/16"
• Flute Length: 15"
• Overall Length: 18"
• Shank Size: 5/8"

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles.

• Diameter: 13/16"
• Flute Length: 18"
• Overall Length: 23"
• Shank Size: 7/16"

Single cutter and side lip effortlessly bores holes in wood where nails may be encountered. Cuts through nails without damaging the bit.

• Diameter: 9/16"
• Twist Length: 9"
• Overall Length: 12"
• Shank Size: 7/16"

WeldTec Ship Auger bits are MADE STRONGER and LAST LONGER because a harder cutting edge is welded to the base material. 2X Nail Cutting Life compared to standard IRWIN ship augers Patent Pending Welded Cutting Edge Wide Flutes.

• Diameter: 13/16"
• Overall Length: 17"
• Shank Size: 7/16" Quick Change Impact Shank

Single-flute cutting edge for greater control through steps Hex shank prevents slipping in drill chuck Also available with (TiN) coating for longer life.

• Hole Sizes: 1/8" - 1/2"
• Number of Holes: 13 Steps
• Maximum Material Thickness: 1/8"

Solid center design provides extra rigidity while boring Wide lands keep the bit straight as it bores through the hole.

• Diameter: 9/16"
• Shank Size: 5/16"
• All bits have a 4-1/2" twist length and a 7-1/2" overall length