Jonard CableSaber™ AST-200 Cable Slitter

The Jonard CableSaber™ is the ultimate tool for gaining mid-span access to armored or thick jacketed cables 4 mm-28.6 mm (0.157”-1.125”) in diameter.

This mid-span cable slit and ring tool also features the following:

• Adjustable blade depth up to 5.5 mm (0.216”)
• Precision steel blade will cut through the toughest materials
• Blade can be set to be longitudinal for slitting or radial for ringing
• For use on cables 4 mm-28.6 mm (0.157”-1.125”) in diameter
• Aluminum shaft provides tremendous stability while slitting or ringing, preventing spiraling from occurring
• Shaft housing acts as a handle, providing greater leverage while slitting for convenience while ringing
• Thumb screw allows blade depth to be adjusted quickly by hand
• Rugged anodized aluminum and steel construction for maximum durability

JONARD AST-RB Replacement Blade for AST Tools

This is a two pack of replacement blades for the AST-10, AST-118, and AST-200 Armored Mid Span Cable Slitting Tools.

These blades feature the following:

• Precision steel blade will cut through the toughest materials and ensure no damage to the internal fibers
• Suitable for both slitting and ringing applications

The Jonard Tools FC-500 precision fiber cleaver is designed to provide a precise cleave and prepare a fiber to be fusion spliced for 250 µm and 900 µm coated optical fiber.

This fiber cleaver features the following:

• Provides a cleave with a cutting angle of less than 0.5° for optimal fiber preparation for fusion splicing
• Long life of 48,000 cuts with 16 position blades
• Lightweight and rugged design for long term durability
• Holds 250 µm and 900 µm fiber and comes with built in fiber trash can
• Scaled holder for accurate cleave lengths from 5 to 20 mm (0.20" to 0.79")
• Ideal for fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice

JON-FCC-120 - FIBER CONNECTOR CLEANER

The Jonard Tools FCC-120 quick click ferrule end face cleaner is designed to provide exceptional cleaning performance by cleaning MPO connectors beyond the critical fiber core area and cleaning deep into the contact area of a bulkhead adapter or connectors on fiber optic cables. The tethered dust cap provides protection for the micro fiber cleaning fabric and is an adapter for connector end face cleaning.

The FCC-120 features a patented 360 degree Rotational Tip for extra wide cleaning, easy one push operation and extendable nozzle, providing an additional 1.5 inches for a nozzle length of 4 inches to aid in accessing deep ports or crowded access panels. Additionally the FCC-120 uses a non-woven micro fiber that is lint free. The FCC-120 provides 500+ cleanings and the outer body is made from static dissipative material for safe ESD work.

Patented Cleaning Technology

Slide-Guide™ non-slip micro tape feeder guarantees high reliability.

JONARD FCC-125 - FIBER CONNECTOR CLEANER 1.25MM

The Jonard Tools FCC-125 quick click ferrule end face cleaner is designed to provide exceptional cleaning performance by cleaning LC connectors beyond the critical fiber core area and cleaning deep into the contact area of a bulkhead adapter or connectors on fiber optic cables. The tethered dust cap provides protection for the micro fiber cleaning fabric and is an adapter for connector end face cleaning.

JONARD FCC-220 - FIBER CLEAVER

The FCC-220 is a single fiber cleaver designed to accommodate either 900µm buffered or 250µm coated fiber. The FCC-220 cleaver's quick and easy three-step operation is well suited for mechanical splice and quick termination field connector applications. The leaf spring base is ruled to allow for cleave lengths of 2 to 20mm. The standard carbide blade will perform up to 6000 cleaves.

Replacement Parts Available:
FCC-4 - Replacement Blade
FCC-65 - Replacement Leaf Spring

JONARD FCC-250 - FIBER CONNECTOR CLEANER 2.5MM

The Jonard Tools FCC-250 quick click ferrule end face cleaner is designed to provide exceptional cleaning performance by cleaning FC, SC and ST connectors beyond the critical fiber core area and cleaning deep into the contact area of a bulkhead adapter or connectors on fiber optic cables. The tethered dust cap provides protection for the micro fiber cleaning fabric and is an adapter for connector end face cleaning.

JONARD FCC-300 - UNIVERSAL FIBER CONNECTOR CLEANER

The new, FCC-300 Universal Fiber Connector Cleaner incorporates a new non-woven, synthetic cleaning cloth offering greater durability, usability and improved reliability. And this cloth can handle wet or dry cleanings and there is never a fiber residue on the end face.

The FCC-300 results in a handheld connector cleaner that is strong enough for aggressive cleaning of a wider range of contaminates, soils and end-face debris.
Stable, consistent, cleaning performance regardless of operator skill thanks to its patent pending Slide-Guide™ connector holder.

Key Features: Extra durable, compact and highly reliable cleaner for connector end-face suitable for cleaning in the field and factory. Automatic “Clean and Advance” tape technology provides a fresh cleaning surface after each swipe eliminating waste and guaranteeing long tool life. Cleaning and tape advance occurs in either direction, only one swipe needed to clean connector end face.

Fiber Inspection Microscope JON-FIM-200.

Designed to provide 850/1300 nm or 1310/1550 nm wavelengths, this optical light source is the perfect tool for providing a stable light source for multimode or single mode fiber measurements.

JONARD FOD-2000 - FIBER OPTIC DROP CABLE SLITTER

The FOD-2000 Fiber Optic Drop Cable Slitter is a patented tool that simplifies the slitting of drop cable jackets at the end of the cable or mid-span and was developed specifically for FTTH technicians working with flat fiber drop cables. For flat cables, where the width is .305"-.350" and the height is .155"-.185". These are the dimensions of a typical Corning SST-Drop flat cable with a jacket thickness of 0.03-0.04 inches. The tool will work on other cables with similar dimensions.

JONARD FOD-RB25 - REPLACEMENT BLADES FOR THE FOD-2000

Replacement blades for the FOD-2000. Comes 25 blades per package

JONARD FS-616 - FIBER SCRIBE

Housed in a protective metal housing with pocket clip, the FS-616 has a 6mm wide blade with a 35-degree beveled edge. It features a wide carbide blade, allowing the cleaving of standard as well as larger diameter fibers and miniature rod shaped lenses. Ideal for scratch and pull scribing of fiber optic cables.

JONARD JIC-186 - WIRE & KEVLAR CUTTING SHEARS

High carbon stainless steel blades (heat treated to HRC 58-60) designed to cut Kevlar®, cabling insulation, tape, cable ties and other material.

JONARD JIC-375 - FIBER OPTIC STRIPPER THREE HOLE

Three hole Fiber Optic Stripper model performs all common fiber stripping functions. The first hole of this Fiber Optic Stripper strips the 1.6-3 mm fiber jacket down to the 600-900 micron buffer coating.

Jonard MDC-14 - MICRO DUCT TUBE CUTTER

Cuts micro ducts and other types of tubing made from PVC, Nylon, Polyethylene and other materials quickly and with less effort so cuts are clean and straight. Maximum duct diameter 14mm (9/16”). Tool is made from Polypropylene with TPR (Thermoplastic Rubber) grips for comfort. Blade is made from heat treated stainless steel for longer life.

• 2.9 - 3.6 mm
• 3.6 - 4.4 mm
• 4.4 - 5.2 mm
• 5.2 - 6.0 mm
• 6.0 - 6.8 mm

Groove Sizes:

JONARD MS-316 - 2.9 mm-6.8 mm JONARD MS- 326 - 5 mm-10 mm

JONARD MS-336 - 7.9mm-11.0mm JONARD MS-426 - 5.8 mm-12 mm JONARD MS-526 - 10.2 mm- 18.2 mm

Groove Sizes:

1.2 - 1.5 mm

1.5 - 1.8 mm

1.8 - 2.1 mm

2.1 - 2.5 mm

2.5 - 2.9 mm

2.9 - 3.3 mm

1. Select the correct groove. Each groove is marked with the recommended fiber size
2. Place the fiber in the groove to be used. The arrow on the top of the MS-6 indicates blade location and pulling direction.
3. Close the tool making sure lock is engaged and pull

Designed to perform live testing with OLT equipment, this PON Power Meter with APC connectors is perfect for use during FTTx/PON service turn-up or maintenance. It is able to simultaneously test and measure the signal power of voice, data, and video connections, and is essential for the construction and maintenance of PON systems