This product is the Replacement Blade Cartridge for Universal Cable Stripping Tool (UST-500) and Coaxial Cable Stripping Tool (UST-100).
This blade cartridge features the following:

• Provides a 2-level strip for F, BNC, and RCA connector termination
• High carbon steel blades last for over 5,000 strips
• Cartridge is reversible for ambidextrous use
• Compatible with all of our UST Stripping Tools (except the UST-175 and UST-185)
• Stripping action removes 1/4" of jacket and 5/16" of shield and dielectric, which exposes the center conductor

With preset factory settings and no adjustments required, this fiber optic stripper is designed to strip 250μm buffer coating to expose the 125μm optical fiber in fiber optic cables.
This fiber optic stripper features the following:

• Unique design strips 250-micron buffer to expose 125-micron optical fiber without damaging the fiber
• Blades are ground and hardened for even longer life
• Ergonomic plastic-dipped handles are comfortable and easy to use

Designed to cut and strip the most commonly used stranded and single conductors, this wire stripper is the perfect tool for cutting and stripping wires 20 AWG-30 AWG (0.81 mm-0.25 mm).
This wire stripper features the following:

• Coil spring reduces hand fatigue when using the tool for extended periods of time
• Conveniently located holes make bending and looping wire quick and easy
• 50 HRC black oxide finish enhances strength and durability of the tool
• Cutting edges are hardened, tempered, and ground for superior cutting and stripping

This product is the Replacement Blade Cartridge for Universal Cable Stripping Tool (UST-500) and Coaxial Cable Stripping Tool (UST-125).
This blade cartridge features the following:

• Provides a 2-level strip for F, BNC, and RCA connector termination
• High carbon steel blades last for over 5,000 strips
• Cable stop on both sides of the cartridge ensures precise stripping without need to make adjustments
• Cartridge is reversible for ambidextrous use
• Compatible with all our UST Stripping Tools (except the UST-175 and UST-185)
• Stripping action removes 1/4" of jacket and 5/16" of shield and dielectric, which exposes the center conductor

RG59/6 & 7/11 COAX Stripping Tool JONARD UST-100

The UST 100 Series strips a multitude of cables. Virtually all of the blades are interchangeable with the exception of the UST-220.

CAT/TP & RG59/6 Cable Stripping Tool JONARD UST-150

The UST 100 Series strips a multitude of cables. Virtually all the blades are interchangeable with the exception of the UST-220. This blade is matched exclusively to the UST-175 handle. Includes Velcro strip for holding back the braided shield of the cable.

This is a 4 piece replacement blade set for the CC-120 COAX Center Conductor Cleaner.
This replacement blade set features the following:

• Includes (2) V-notched and (2) straight-edge cleaning blades
• Blades are made from a rugged polycarbonate material for longer life
• Blades can be easily replaced by removing and retightening 4 easy access screws

Designed to cut microducts cleanly and straight, this microduct cutter is perfect for cutting most microducts including tubing made from PVC, Nylon, and other materials up to 14 mm (9/16") in diameter.
This microduct cutter features the following:

• Made from polypropylene with thermoplastic rubber (TPR) grips for maximum grip and comfort
• Heat treated stainless steel blade cuts through ducts with ease
• Cuts tubing up to 14 mm (9/16") in diameter

Universal Cable Stripping Tool JONARD UST-500

Use for Coax, Round Network Cables and Flat Cables - This versatile tool is five tools in one. Insert the Round Cable into the second hole (adjustable) for a fast and easy strip. Will strip CAT6 cables with outside diameter up to 0.250".

The Jonard Tools UST-125 COAX stripping tool is designed to strip RG59 & RG6 Standard, Tri & Quad Shield, N48, RG7, and RG11 coaxial cables for quick and easy termination.
This COAX stripping tool features the following:

• Included blade cartridge (UST-225) provides a 2-level strip for F, BNC, and RCA connector termination
• High carbon steel blades last over 5,000 strips
• Cable stop on both sides of the cartridge ensures precise stripping without need to make adjustments
• Cartridge is reversible for ambidextrous use
• Hook and Loop strip on bottom of the tool folds back the braided shield on the cable with ease
• Large finger loop provides smooth rotation during use
• Stripping action removes 1/4" of jacket and 5/16" of shield and dielectric, which exposes the center conductor

JONARD JIC-186 - WIRE & KEVLAR CUTTING SHEARS

High carbon stainless steel blades (heat treated to HRC 58-60) designed to cut Kevlar®, cabling insulation, tape, cable ties and other material.

DUAL & QUAD SHIELD MINI COAX STRIPPER JONARD UST-185

The UST-185 mini coax cable stripper is specifically designed to provide a ¼”x ¼” two step strip on dual and quad shield mini coax cables. This tool works on Belden, Commscope, Times Fiber and other mini coax cables. The unique blade design has blades setup for Dual shield on one side and Quad shield on the other. Blade is capable of over 5000 strips.

Jonard’s diagonal cutting pliers are made of polished chrome vanadium steel and are heat-treated for maximum strength and durability.
These diagonal cutting pliers feature the following:

• Induction-hardened cutting edge to provide a clean cut every time
• 0.045” stripping hole, crusher, and two V-shaped stripping notches on the edges
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product complies with ASME B107.11 and ISO 5749 standards

Designed to cut copper, aluminum, leather, plastic, and other materials, these heavy duty scissors are the perfect tool for cutting cables up to 1/4” in diameter.
These scissors feature the following:

• One blade is serrated for a tight and secure grip while cutting
• Wire stripper accommodates 12 AWG, 14 AWG and 18 AWG (2.0, 1.5 and 1.0 mm2 cross sectional area) wire
• Dual component polypropylene (PP) and thermoplastic rubber (TPR) grip for greater comfort and ergonomics
• Includes a safety locking mechanism and adjustment screw for convenience
• Not for use on stainless steel or other hardened/heat treated metals

JONARD M-216CS22 - CAN WRENCH, ERGONOMIC W/ WIRE STRIPPER

Can Wrench Ergonomic 7/8" Diameter Handle, Hex Outer Socket (1 1/2" deep) with 22 AWG Stripper Blade. Open telephone box fasteners and tighten nuts on binding posts. Designed for universal access to telephone boxes and pedestals.

Designed to clean away excess dielectric material from the center conductor of distribution or trunk cables, this cleaner is perfect for cleaning center conductors without nicking or scratching the conductor’s surface.

JONARD JIC-375 - FIBER OPTIC STRIPPER THREE HOLE

Three hole Fiber Optic Stripper model performs all common fiber stripping functions. The first hole of this Fiber Optic Stripper strips the 1.6-3 mm fiber jacket down to the 600-900 micron buffer coating.

GMP 01820 Round Cable Slitter for 1/2 in. (14mm) to 1 in. dia. (25mm) Cable.

Discontinued with Limited Stock

This product is a pack of 25 reversible replacement blades for the FOD-2000 Fiber Optic Drop Cable Slitter.

This is a two pack of replacement blades for the AST-10, AST-118, and AST-200 Armored Mid Span Cable Slitting Tools.
These blades feature the following:

• Precision steel blade will cut through the toughest materials and ensure no damage to the internal fibers
• Suitable for both slitting and ringing applications