Regular nuts are used on all types of threaded bolts and insulator pins. Considered safest to use by utility linemen. The J8562 regular square nut has a large wrenching surface.

Regular nuts are used on all types of threaded bolts and insulator pins. Considered safest to use by utility linemen. The J8563 regular square nut has a large wrenching surface.

Regular nuts are used on all types of threaded bolts and insulator pins

Regular nuts are used on all types of threaded bolts and insulator pins

Regular nuts are used on all types of threaded bolts and insulator pins

Heavy nuts are used exclusively on anchor rods. Considered safest to use by utility linemen. The J8561 regular square nut has a large wrenching surface.

Heavy nuts are used exclusively on anchor rods. 3/4" j8564-1.

Not for any type of anchor rods. Oval eyenuts are used for deadending with suspension or strain insulators. Oval eyenuts are tapped to fit hot dip galvanized bolts made to ANSI Specifications and are designed to develop strength ratings consistent with the bolts with which they are used.

Not for any type of anchor rods. Thimble Eyenut 5/8" J6510 Thimble eyenuts are tapped to fit hot dip galvanized bolts made to ANSI Specifications and are designed to develop strength ratings consistent with the bolts with which they are used.Thimble eyenuts are used for span, head and stub guying.

Thimble Eyenut 5/8" J6510

Not for any type of anchor rods. 3/4" Thimble eyenuts are tapped to fit hot dip galvanized bolts made to ANSI Specifications and are designed to develop strength ratings consistent with the bolts with which they are used.
Thimble eye nuts are used for span, head and stub guying.

Regular nuts are used on all types of threaded bolts and insulator pins

Not for any type of anchor rods. Oval eyenuts are used for deadending with suspension or strain insulators. Oval eye nuts are tapped to fit hot dip galvanized bolts made to ANSI Specifications and are designed to develop strength ratings consistent with the bolts with which they are used.

Not for any Anchor Rods Twin eyenuts are tapped to fit hot dip galvanized bolts made to ANSI Specifications and are designed to develop strength ratings consistent with the bolts with which they are used. Twin eye nuts accommodate double guys. J6516 /All 5046Twin eye nut

1" Heavy Nut for Anchor Rods J8565-1

Can Also Be used for D100 or D75 Pisa Rod. Thimble eyenuts are tapped to fit 1" hot dip galvanized bolts made to ANSI Specifications and are designed to develop strength ratings consistent with the bolts with which they are used. Thimble eye nuts are used for span, head and stub guying.

Thimble eye-nuts used to fasten dead ends - span, head and stub guying for 1" pole line hardware.
H-J16512/ALL5095 1"EYE NUT

Used Only in conjunction with PISA D100 1" Anchor rods , D10031C 1" x 3-1/2ft or D75 rod for helical and Manta Ray anchors. Eye nuts are forged from strength 1045 steel. Hot dip galvanized to meet ASTM Specification A153 class C. For Anchor rods only. Anchor Rod eyenut H-J12585-D6567-for-Pisa-Rod

Regular nuts are used on all types of threaded bolts and insulator pins

Not for any Type of Anchor rods. Twin eye-nuts accommodate double guys. For 5/8-11 hardware. Will not fit D-62 Rod .

Twin Eyenut 5/8" J6515