Home > Pole Line Hardware > ADSS Dead End Kits & Supports >

PLP FIBERLIGN® Dielectric Support (FDS) for ADSS 44009952 0.476-0.525 TO 44009963 0.826-0.900
PLP FIBERLIGN® Dielectric Support (FDS) for ADSS


 
Our Price: $46.66
SALE Price: $40.44
You save $6.22!


Product Code: H-PLP-DIELECTRIC-SUPPORT-


DIELECTRICAL SUPPORT RANGE:


Qty:  
Description
 
The FIBERLIGN Dielectric Support (FDS) system is designed to gently, but firmly, support All-Dielectric Self-Supporting (ADSS) cable. It is intended for tangent support installations on lines that feature relatively low voltages, short spans and modest mechanical loads.

Quantity 2 Inserts Required per Support
Housing Only # 440000000
INSER COMPONENT
Inset Part #Size
000701070.476-0.525
000700880.526-0.575
000701090.626-0.675
000701100.676-0.750
000701110.751-0.825
000701120.826-0.900
H-PLP44009776 .626" - .675", H-PLP44009799 .676" - .750", H-PLP44009823 .526" - .575", H-PLP44009878 .751" - .825", H-PLP44009952 .476" - .525", H-PLP44009963 .826" - .900"
44009952, 44009823, 44009776, 44009799, 44009878, 44009963
Features

    • The approximate recommended maximum span lengths for the FDS are:
      • 600' for < 1.00" OD cable (NESC – heavy)
      • 300' for ≥ 1.00" OD cable (NESC – heavy)
    • Body and top are made from a high-strength, engineered dielectric material. Zine plated bolts with washers secutre the top to the body.
    • Inserts are made from a soft, pliable dielectric material that gently grips the ADSS cable.
    • Threads onto standard 5/8" 11-UNC hot dipped galvanized thru-bolt
    • May be mounted horizontally or vertically
    • May be used as a stringing traveler at the structure on up to 10° line angles (20° in certain cases).
    • All components may be reused as desired if in good condition.