Home > Pole Line Hardware > ADSS Dead End Kits & Supports >

PLP FIBERLIGN® Dielectric Support (FDS) for ADSS 44002144 0.275 to 440010296 1.0001
PLP FIBERLIGN® Dielectric Support (FDS) for ADSS


 
Our Price: $46.66
SALE Price: $40.07
You save $6.59!


Product Code: H-PLP-DIELECTRIC-SUPPORT


DIELECTRICAL SUPPORT RANGE:


Qty:  
Description
 
The FIBERLIGN Dielectric Support (FDS) system is designed to gently, but firmly, support All-Dielectric Self-Supporting (ADSS) cable. It is intended for tangent support installations on lines that feature relatively low voltages, short spans and modest mechanical loads.

Quantity 2 Inserts Required per Support
Housing Only # 440000000
INSER COMPONENT
Inset Part #Size
000700610.275-0.325
000700520.326-0.375
000700560.376-0.425
000700590.426-0.475
000701080.576-0.625
000701130.901-0.950
000701470.951-1.000
000701541.0001-1.050

H-PLP44000691 .326" - .375", H-PLP440010296 1.0001" - 1.050", H-PLP44002144 .275" - .325", H-PLP44002213 .901" - .950", H-PLP44003915 .951" - .950", H-PLP44009798 .576" - .625", H-PLP44009949 .426" - .475", H-PLP44009998 .376" - .425"
44002144, 44000691, 44009998, 44009949, 44009798, 44002213, 44003915, 440010296
Features

    • The approximate recommended maximum span lengths for the FDS are:
      • 600' for < 1.00" OD cable (NESC – heavy)
      • 300' for ≥ 1.00" OD cable (NESC – heavy)
    • Body and top are made from a high-strength, engineered dielectric material. Zine plated bolts with washers secutre the top to the body.
    • Inserts are made from a soft, pliable dielectric material that gently grips the ADSS cable.
    • Threads onto standard 5/8" 11-UNC hot dipped galvanized thru-bolt
    • May be mounted horizontally or vertically
    • May be used as a stringing traveler at the structure on up to 10° line angles (20° in certain cases).
    • All components may be reused as desired if in good condition.