 |
 |
 |
|
The FIBERLIGN Dielectric Support (FDS) system is designed to gently, but firmly, support All-Dielectric Self-Supporting (ADSS) cable. It is intended for tangent support installations on lines that feature relatively low voltages, short spans and modest mechanical loads.
Quantity 2 Inserts Required per Support
Housing Only # 440000000| INSER COMPONENT | | | Inset Part # | Size | | 00070061 | 0.275-0.325 | | 00070052 | 0.326-0.375 | | 00070056 | 0.376-0.425 | | 00070059 | 0.426-0.475 | | 00070107 | 0.476-0.525 | | 00070088 | 0.526-0.575 | | 00070108 | 0.576-0.625 | | 00070109 | 0.626-0.675 | | 00070110 | 0.676-0.750 | | 00070111 | 0.751-0.825 | | 00070112 | 0.829-0.900 | | 00070113 | 0.901-0.950 | | 00070147 | 0.951-1.000 | | 00070154 | 1.0001-1.050 |
H-PLP00070052 0.326-0.375, H-PLP00070056 0.376-0.425, H-PLP00070059 0.426-0.475, H-PLP00070061 0.275-0.325, H-PLP00070088 0.526-0.575, H-PLP00070107 0.476-0.525, H-PLP00070108 0.576-0.625, H-PLP00070109 0.626-0.675, H-PLP00070110 0.676-0.750, H-PLP00070111 0.751-0.825, H-PLP00070112 0.826-.900, H-PLP00070113 0.901-0.950, H-PLP00070147 0.951-1.000, H-PLP00070154 1.0001-1.050
00070052, 00070056, 00070059, 00070061, 00070088, 0070107, 00070108, 00070109, 00070110, 00070111, 00070112, 00070113, 00070147, 00070154
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- The approximate recommended maximum span lengths for the FDS are:
- 600' for < 1.00" OD cable (NESC – heavy)
- 300' for ≥ 1.00" OD cable (NESC – heavy)
- Body and top are made from a high-strength, engineered dielectric material. Zine plated bolts with washers secutre the top to the body.
- Inserts are made from a soft, pliable dielectric material that gently grips the ADSS cable.
- Threads onto standard 5/8" 11-UNC hot dipped galvanized thru-bolt
- May be mounted horizontally or vertically
- May be used as a stringing traveler at the structure on up to 10° line angles (20° in certain cases).
- All components may be reused as desired if in good condition.
|
|
|
|
|
|
|