The 12091 Weld-On Duit 425(Blue) is a medium bodied, extremely fast setting, low VOC
cement for all PVC electrical conduit or any non-pressure PVC application with interference
fit through 6″ (160 mm) diameter. Can be used without primer if local codes permit.
Has a three year shelf life.
WELDON DUIT

Medium bodied, fast setting, low VOC cement for all PVC electrical conduit or any non-pressure PVC application with interference fit through 6″ (160 mm) diameter. Can be used without primer if local codes permit.
PVC Cement 1 Gallon Weld-On Duit 413 CLEAR
WELDON

The 12092 Weld-On Duit 425(Blue) is a medium bodied, extremely fast setting, low VOC
cement for all PVC electrical conduit or any non-pressure PVC application with interference
fit through 6″ (160 mm) diameter. Can be used without primer if local codes permit.
Has a three year shelf life.
WELDON

Weld-On® DUIT™ 413™ CLEAR

Medium bodied, fast setting, low VOC cement for all PVC electrical conduit or any non-pressure PVC application with interference fit through 8″ (200 mm) diameter. Can be used without primer if local codes permit.

PVC Cement 1 Quart GREEN WELDON 794 10273 ABS TO PVC
Weld-On® 794™ ABS–PVC Transition

Phyisical/Chimical properties

Appearance Gray Liquid
Viscosity min. 1600 cps @ 73° F ± 2° F
Density 7.86 ± 0.2 lbs/gallon
Lap Shear Strength (minimum per ASTM Standards)
2 hours 250 psi
16 hours 500 psi
72 hours 900 psi
Set Up Time
30° F to 50° F 4 – 5 minutes
50° F to 70° F 2 – 3 minutes
70° F to 90° F 1 – 2 minutes
Shelf Life 3 years from manufacture date

Phyisical/Chemical Properties:
Appearance Clear Liquid
Viscosity min. 500 cps @ 73° F ± 2° F
Density 7.74 ± 0.2 lbs/gallon
Lap Shear Strength (minimum per ASTM Standards)
2 hours 250 psi
16 hours 500 psi
72 hours 900 psi
Set Up Time:
30° F to 50° F 5 – 6 minutes
50° F to 70° F 3 – 4 minutes
70° F to 90° F 1 – 2 minutes
Shelf Life 3 years from manufacture date

SuperSwab® Weld-On IPS 14108
A sturdy easy-to-grip 4″ swab for pipe diameter from 4″ through 8″. Adjustable length and dual cap design that fits quart and gallon containers. The swab tip is disposable and swab holder is reusable.

Jumbo Roll-A-Weld 7″ roller for pipe diameters of 6″ or larger; fits MT-648 empty gallon can and cements available in wide mouth cans.

Weld-On IPS 10010 EMPTY 1 GAL. CAN
2-7/8" NECK USE WITH 7" ROLLER IPS 10008.

Weld-On Plastic Brush Applicator
Brush Applicator for Pint and Quart Cans of PVC Glue and Primer.
Features:

• Plastic Cap with Handle and Brush Applicator
• For PVC Glue, Primer and Solvents
• Fits Pint and Quart size cans

Cable Saw with T-handle for cutting pvc plastic pipe through 8" diameter.

Replacement swabs for use with the super swab handle.
REPLACEMENT SWAB PACKAGE OF FOUR, FOR USE WITH SUPERSWAB 14108
SWAB ONLY 4PK.