You are here: Home > Aerial Lineman Tools > Pole Mount Brackets
We found 18 results matching your criteria.
Pole Mount Brackets
Sort By:
1
Condux 18106000 Pole Bracket Pole Bracket Condux 18106000

Use with any quad pole mount

Installs easily on the Pole Bracket to provide a horizontal axis to mount 45 Degree Corner Blocks that are to be used as a reel-to-strand chute.

Jameson 70-102 Pole-Mount Bracket - Dual Pole-Mount Bracket - Dual Jamesson 70-102

This bracket is ideal for mounting dual corner blocks on the pole. Innovative design features of the nylon strap and ratchet make Jameson pole-mount brackets simple and quick to use.Bracket base is contoured to fit pole radius, providing maximum bracket stability.
Nylon ratchet strap will not damage existing cable drops on pole and weighs less than chain straps.Can be adjusted to work from right or left hand side for operation convenience.

Our Price: $154.21
Jameson 70-104 Pole-Mount Bracket - Quad Pole-Mount Bracket - Quad Jameson 70-104

This bracket is ideal for mounting quad corner blocks on the pole. Innovative design features of the....

Our Price: $154.21
GMP 70440 VERTICAL ANGLE ADAPTER Vertical Angle Adapter GMP 70440

VERTICAL ANGLE ADAPTER GMP70440
Corner Block Roller set up:
*vertical angle adapter 70440
*90 degree corner block w/ aluminum rollers 70449
*pole mount bracket 70372

Our Price: $178.00
GMP 70372 POLE MOUNT BRACKET Pole Mount Bracket GMP 70372

POLE MOUNT BRACKET GMP 70372
Corner Block Roller set up:
*vertical angle adapter 70440
*90 corner block w/ aluminum rollers 70449
*pole mount bracket 70372

Our Price: $225.00
Lemco L-879 POLE BRACKET MOUNT W/ CHAIN MOUNT Pole Bracket W/ Chain Mount Lemco L-879

POLE BRACKET MOUNT W/ CHAIN MOUNT Lemco L-879.
Used to support 45 and 90 corner blocks. Two swivel snaps are provided to support the bracket from the strand while placing the chain around the pole. A drive-screw device tightens the chain by turning a jack handle. Protected with a durable black polyester powder coat.

Our Price: $262.47
GMP 75985 Pole Mount Spindle Pole Mount Spindle GMP75985

Equipped with a ratchet binder using a 2" wide web to provide a sturdy, yet temporary, attachment to a pole for Fios/Vats cable reels.

Our Price: $338.00
GMP 10727 Alloy Capstan  7" Alloy Capstan 7" GMP 10727

This general purpose capstan is used for a wide variety of pulling and hoisting applications. Cast from a high strength aluminum alloy for low weight . Will fit on any 2-7/16 in. (62 mm) diameter winch extension shaft equipped with a bayonet or pin type mount. The working surface is 7-1/4 in. diameter x 8 in. (184 mm x 200 mm) wide. The maximum allowable pull is 4000 lbs. (1814 kgs).

Our Price: $565.00
GMP 79601 Modified E Cable Leader Modified E Cable Leader GMP 79601

  • The GMP 79601 Modified E Cable Leader is 12 ft. (3.65m) long and consists of several hinged weights which normally hang vertically to resist cable and strand rotation. It also contains a tipper bar assembly (in the front) for attaching the pulling-in rope sling and swivel, and a special tip assembly for attaching a cable grip, replacing the provided strand grip.

Our Price: $993.75
Condux 08676000 Pole Mounting Frame Pole Mounting Frame Condux 08676000

Install the cable puller on the frame with no modifications necessary to the puller.
By design, the Pole Mounting Frame offers a secure hold on the cable puller both
vertically and horizontally for a worry-free pull. A special plug drives into wood
poles for added stability. Includes all mounting hardware.

Condux 08675430 Capstan 30" x 8" Sheave Capstan Wheel 30" x 8" Condux 08675436

Condux Capstans are to conform to the many specifications to fiber optic cable available, and to offer more cable pulling capabilities. Diameter: 30" Flat With: 8" Max cable OD 1.25".



GMP 15472 Mid-Assist Fiber Optic 25" Capstan Wheel Mid-Assist Fiber Optic 25" Capstan Wheel GMP 15472

GMP fiber optic pulling capstan is a versatile and highly productive tool for placing fiber optic cable. It is based on GMP's accessory approach to fiber cable placing that lets you use your existing pulling equipment winches and capstan drives, without special modifications or expensive new pulling equipment. The Large working diameter of the capstan translates into good pulling speed and you can pull with rope, tape or pull the fiber cable itself. This means that the fiber optic pulling capstan can be used both as a end puller or a mid assist booster puller.

Our Price: $2,775.00
GMP 70351 Mid-Assist Fiber Optic Capstan Wheel 32" X 7.5" #600 Mid-Assist Fiber Optic Capstan Wheel 32" X 7.5" #600 GMP 70351

The 32" model is available with a 600 lbs. torque limiter Due to their generous working surface diameters, either size capstan can be used as an end puller or a mid-assist. Multiple units can be used in series for extra long pulling situations to eliminate the need to figure-8 cable at a mid-point All units mount on any 2 7/16" standard winch drum shaft extension; either bayonet or pin-type mount available The built-in torque limiter will limit the tension on the fiber optic cable during the pulling operation.

Our Price: $2,888.88
GMP 70471 Mid-Assist Fiber-Optic Capstan Wheel with Slip Clutch, 32" X 7.5 #1000 Mid-Assist Fiber-Optic Capstan Wheel with Slip Clutch, 32" X 7.5 #1000 GMP 70471

The 32" model is available with a 1000 lbs. torque limiter Due to their generous working surface diameters, either size capstan can be used as an end puller or a mid-assist. Multiple units can be used in series for extra long pulling situations to eliminate the need to figure-8 cable at a mid-point All units mount on any 2 7/16" standard winch drum shaft extension; either bayonet or pin-type mount available The built-in torque limiter will limit the tension on the fiber optic cable during the pulling operation.

Our Price: $3,300.00
Condux 08675220 Capstan Wheel 50" x 8" Capstan Wheel 50" x 8" Condux 08675220-R

Used 50" fiber Optic Capstan Wheel To conform to the many specifications of fiber optic cable available, and to offer more cable pulling capabilities, Condux offers several sizes of capstans that fit the Condux Fiber Optic Cable Puller. These bayonet style capstans are offered in 12" (305 mm), 30" (762 mm), 42" (1,067) and 50" (1,270 mm) diameters for a standard 27⁄16" diameter bayonet style shaft.Condux 08675220. This is an almost brand new, but used wheel, that has only been used in a demonstration for less than an hour. It may have a minor abrasion or a few chips in the paint but comes with a full 6 month warranty



Our Price: $3,500.00
GMP 70473 Mid-Assist Fiber Optic Capstan Wheel with Slip Clutch 40" X 7.5" #600 Mid-Assist Fiber Optic Capstan Wheel with Slip Clutch 40" X 7.5" #600 GMP 70473

The 40" model is available with a 600 lbs. torque limiter Due to their generous working surface diameters, either size capstan can be used as an end puller or a mid-assist. Multiple units can be used in series for extra long pulling situations to eliminate the need to figure-8 cable at a mid-point All units mount on any 2 7/16" standard winch drum shaft extension; either bayonet or pin-type mount available The built-in torque limiter will limit the tension on the fiber optic cable during the pulling operation.

Our Price: $3,775.00
GMP 70475 Mid-Assist Fiber Optic Capstan Wheel with Slip Clutch 40" X 7.5" #1000 Mid-Assist Fiber Optic Capstan Wheel with Slip Clutch 40" X 7.5" #1000 GMP 70475

The 40" model is available with a 1000 lbs. torque limiter Due to their generous working surface diameters, either size capstan can be used as an end puller or a mid-assist. Multiple units can be used in series for extra long pulling situations to eliminate the need to figure-8 cable at a mid-point All units mount on any 2 7/16" standard winch drum shaft extension; either bayonet or pin-type mount available The built-in torque limiter will limit the tension on the fiber optic cable during the pulling operation.

Our Price: $3,775.00
Condux 08675220 Capstan Wheel 50" x 8" Capstan Wheel 50" x 8" Condux 08675220

New 50" fiber Optic Capstan Wheel To conform to the many specifications of fiber optic cable available, and to offer more cable pulling capabilities, Condux offers several sizes of capstans that fit the Condux Fiber Optic Cable Puller. These bayonet style capstans are offered in 12" (305 mm), 30" (762 mm), 42" (1,067) and 50" (1,270 mm) diameters for a standard 27⁄16" diameter bayonet style shaft.Condux 08675220.


   
 
1