3" PIPE STRAP Allied Bolt 769

• Used for attaching a vertical pipe duct to telephone poles or other curved surfaces.
  
• Manufactured from AISI 1018 Steel.
  
• Legs of clamp are offset 20° for easy assembly on curved surfaces.
  
• Mounting hole is 7/16".
  
• Stock size is .250" x 1".
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.
• Lag Screw recommended:

LAG SCREW GIMLET POINT 1/2 1/4X2-1/2"

H-769 Pipe Strap, for 3" inside diameter pipe

4" PIPE STRAP Allied Bolt 770

• Used for attaching a vertical pipe duct to telephone poles or other curved surfaces.
  
• Manufactured from AISI 1018 Steel.
  
• Legs of clamp are offset 20° for easy assembly on curved surfaces.
  
• Mounting hole is 7/16".
  
• Stock size is .250" x 1".
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.
• Lag Screw recommended:

Lag Screw GIMLET POINT 1/2 1/4X 2-1/2"

Pole Strap Galvanized 1" H-EMC 50-1USPHD

Features:

• 9/32" hole size.
• Thickness – 12 gauge.
• Hot dip galvanized after forming.
• Lag Screw recommended:

Lag Screw Hex Head 1/4"X2-1/2"

H-EMC-50-1USPHD Riser Cleat

Pole Strap Galvanized 3" H-EMC 50-3USPHD

Features:

• 9/32" hole size.
• Thickness – 12 gauge.
• Hot dip galvanized after forming.
• Lag Screw recommended:

Lag Screw Hex Head 1/4"X2-1/2"

H-EMC-50-3USPHD Riser Cleat

Pole Strap Galvanized 4" H-EMC 50-4USPHD

Features:

• 9/32" hole size.
• Thickness – 12 gauge.
• Hot dip galvanized after forming.
• Lag Screw recommended:

Lag Screw Hex Head 1/4"X2-1/2"

H-EMC-50- 4USPHD Riser Cleat

Pole Strap Galvanized 5" H-EMC 50-5USPHD

Features:

• 9/32" hole size.
• Thickness – 12 gauge.
• Hot dip galvanized after forming.
• Lag Screw recommended:

Lag Screw Hex Head 1/4"X2-1/2"

H-EMC-50-5USPHD Riser Cleat

Pole Strap Galvanized 6" H-EMC 50-6USPHD

Features:

• 9/32" hole size.
• Thickness – 12 gauge.
• Hot dip galvanized after forming.
• Lag Screw recommended:

Lag Screw Hex Head 1/4"X2-1/2"

H-EMC-50-6USPHD Riser Cleat

Pole Strap Galvanized 2" H-EMC 50-2USPHD

Features:

• 9/32" hole size.
• Thickness – 12 gauge.
• Hot dip galvanized after forming.
• Lag Screw recommended:

Lag Screw Hex Head 1/4"X2-1/2"
H-EMC-50-2USPHD Riser Cleat

U-Guard Strap 1" Aluma-Form BST-1

1" U-guard strap. Can be Banded with 3/4" Band
These straps can be banded or lagged to hold a single conduit or u-guard on a pole.

U-Guard Strap 2" Aluma-Form BST-2

2" U-guard strap. Can be Banded with 3/4" Band
These straps can be banded or lagged to hold a single conduit or u-guard on a pole.

U-Guard Strap 3" Aluma-Form BST-3

3" U-guard strap. Can be Banded with 3/4" Band
These straps can be banded or lagged to hold a single conduit or u-guard on a pole.

U-Guard Strap 4" Aluma-Form BST-4

4" U Guard Strap. Can be Banded with 3/4" Band
These straps can be banded or lagged to hold a single conduit or u-guard on a pole.