Fiber Optic Pulling Grip 0.21-0.35" Condux 08643754

• Cable Diameter Range: 0.21-0.35"
• Approx. Breaking Point: 1,400 lbs.
• Eye Length: 7-1/2"
• Mesh Length: 14"

Fiber Optic Pulling Grip 0.10-0.22" Condux 08643753

Double/Single weave mesh, galvanized steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip

• Cable Diameter Range: 0.10-0.22"
• Approx. Breaking Strength: 900 lbs.
• Eye Length: 7-1/2"
• Mesh length: 10"

Fixed Head Innerduct Pulling Eye 1"-1.25, 1.06"-1.43" Condux 08761842

Condux 08761842 Fixed Head Innerduct Pulling Eye 1"-1 1/4", 1.06-143"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

Fiber Optic Pulling Grip 0.53-0.74" Condux 08643757

Double/Single weave mesh, galvanized steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip

• Cable Diameter Range: 0.53-0.74"
• Approx. Breaking Strength: 3,000 lbs.
• Eye Length: 8-1/2"
• Mesh Length: 23"

Fiber Optic Pulling Grip 0.42-0.61" Condux 08643756

Double/Single weave mesh, galvanized steel for outside plant cable. Used for installation of fiber optic communication lines either underground, overhead, through enclosures. They will fit single cables or cables bundles, are easily installed on the cable and are reusable.
Fiber Optic - Low Profile, Double/Single Weave, Low Profile Grip

• Cable Diameter Range: 0.42-0.61"
• Approx. Breaking Strength: 2,500 lbs.
• Eye Length: 8-1/2"
• Mesh Length: 21"

Fiber Optic Pulling Grip 0.75-1.00" Condux 08643759

Double/Single weave mesh, galvanized steel for outside plant cable. Used for installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip

• Cable Diameter Range: 0.75-1.00"
• Approx. Breaking Strength: 2,500 lbs.
• Eye Length: 8-1/2"
• Mesh Length: 28"

Double Weave-Single Flexible Pulling Grip 0.33-0.78" GMP 70670

The GMP Double Weave Pulling Grip is manufactured for high-tensile, galvanized steel wire that is evenly hand woven in a single, double or triple wire weave according to pulling tension requirements. GMP reverse weave our grips which create a loop at the end of the grip instead of being crimped or soldered together. the wire is then joined under the crimped head. This creates a higher quality product that outlasts competition.
Double Weave Single Flexible Eye
Cable Diameter: 0.33-0.78" (10-20mm)
Grip Length: 23.62" (600mm)
Min. Breaking Strength: 4101 lbs.

Breakaway Swivel 5/8" 600 lbs. Condux 08017200

Condux 08017200 Breakaway Swivel 5/8" 600 lbs.

Essential for fiber optic and coaxial cable pulling, these swivels have a break load ranging from 150–1,800 pounds (667–8,006 N) and are designed to separate at ±10% of their rated break load. If the load rating is exceeded, the interior break pin fractures, the swivel separates, and the cable remains undamaged.

*Replacement Pin Not Included*
Condux 08017205 Replacement Breakaway Pin for 5/8" Swivel 600 lbs.

SUB - GMP71408

Fixed Head Innerduct Pulling Eye 1 .5", 1.37"-1.68" Condux 08761844

Condux 08761844 Fixed Head Innerduct Pulling Eye 1.5", 1.37-1.68"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

Fixed Head Innerduct Pulling Eye 2", 1.80"-2.19" Condux 08761846

Condux 08761846 Fixed Head Innerduct Pulling Eye 2", 1.80-2.19"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

Fixed Head Innerduct Pulling Eye 1-1/4", 1.06"-1.43" Condux 08914130

Condux 08914130 Fixed Head Innerduct Pulling Eye 1-1/4", 1.06" -1.43"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60512

Fixed Head Innerduct Pulling Eye 1-1/2", 1.37"-1.68" Condux 08914140

Condux 08914140 Fixed Head Innerduct Pulling Eye 1-1/2", 1.37"-1.68"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60515

Fixed Head Innerduct Pulling Eye 1-3/4", 1.68"-1.81" Condux 08914150

Condux 08914150 Fixed Head Innerduct Pulling Eye 1-3/4", 1.68"-1.81"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

Fixed Head Innerduct Pulling Eye 2", 1.93"-2.12" Condux 08914160

Condux 08914160 Fixed Head Innerduct Pulling Eye 2", 1.93"-2.12"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60520

Fixed Head Innerduct Pulling Eye 1", 0.93"-1.06" Condux 08914120

Condux 08914120 Fixed Head Innerduct Pulling Eye 1", 0.93"-1.06"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60510

Pulling Eye, Inner-Duct 1-1/4" Swivel Head Condux 08960712

Condux 08960712 Pulling Eye, Inner-Duct 1-1/4" Swivel Head

Specification:
ID Range: 1.00-1.25"

Pulling Eye, Inner-Duct 1-1/2" 1.37" - 1.5" Swivel Head Condux 08960715

Condux 08960715 Pulling Eye, Inner-Duct 1.37" - 1.50" Swivel Head
The Inner-duct Pulling Eye is a hybrid tool that combines features from standard inner-duct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the inner-duct as it is installed. It eliminates the need for a separate swivel on each pulling eye when installing single innerducts into individual conduits or multiple inner-ducts into a single conduit. Its short length is an advantage on tight bends compared to using a separate swivel and pulling eye. Easily installed using a 1-3⁄8" deep socket or adjustable wrench.
SUB - GMP61515

Specification:
ID Range: 1.37" - 1.50"
Max OD: 1.50"

Pulling Eye, Inner-Duct 2" Swivel Head Condux 08960720

Condux 08960720 Pulling Eye, Inner-Duct 2" Swivel Head
The Inner-duct Pulling Eye is a hybrid tool that combines features from standard inner-duct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the inner-duct as it is installed. It eliminates the need for a separate swivel on each pulling eye when installing single innerducts into individual conduits or multiple inner-ducts into a single conduit. Its short length is an advantage on tight bends compared to using a separate swivel and pulling eye. Easily installed using a 1-3⁄8" deep socket or adjustable wrench.
SUB - GMP61520

Specification:
ID Range: 2"

Fiber Optic Pulling Grip Flexible Eye 0.53-0.74" Condux 08643524

Double/Single weave mesh, galvanized steel for outside plant cable. Used for installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip

• Cable Diameter Range: 0.53-0.74"
• Approx. Breaking Strength: 3300 lbs.
• Eye Length: 6-1/2"
• Mesh Length: 24"

Fiber Optic Pulling Grip Swivel Eye 2.00-2.49" Condux 08642155

• Cable Diameter Range: 2.00-2.49"
• Approx. Breaking Point: 27,200 lbs.
• Eye Length: 9"
• Mesh Length: 36"

Fiber Optic Pulling Grip Swivel Eye .25-.49" Condux 08641813

• Cable Diameter Range: .25-.49"
• Approx. Breaking Point: 6,800 lbs.
• Eye Length: 5"
• Mesh Length: 26"

Threaded Chain Connector 5/16" 1430 Lbs Condux 08581231

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Note: To be used for cable stringing or pulling only. 5/16" 1430 Lbs

Threaded Chain Connector 3/8" 1,760 Lbs Condux 08581237

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Note: To be used for cable stringing or pulling only. 3/8" 1,760 Lbs

Threaded Chain Connector 1/2" 2,755 Lbs Condux 08581250

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Note: To be used for cable stringing or pulling only. 1/2" 2,755 Lbs

Threaded Chain Connector 9/16" 4410 Lbs Condux 08581256

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Note: To be used for cable stringing or pulling only. 4410 Lbs 14.3mm

Threaded Chain Connector 5/8" 5510 Lbs Condux 08581262

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Note: To be used for cable stringing or pulling only. 5/8" 5510 Lbs

Figure 8 Swing Link 3/8" 900lbs Condux 08580837

Figure 8 Swing Link 1/2" 1,620lbs Condux 08580850

Figure 8 Swing Link 3/4" 3600lbs Condux 08580875

Figure 8 Swing Link 1" 8100lbs Condux 08580899

Threaded Chain Connector 1/4" 770 Lbs CONDUX 08581225

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Note: To be used for cable stringing or pulling only. 1/4" 770 Lbs 6.4mm

Fiber Optic Pulling Grip 0.32-0.48" Condux 08643755

Double/Single weave mesh, galvanized steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip

• Cable Diameter Range: 0.32-0.48"
• Approx. Breaking Strength: 2,000 lbs.
• Eye Length: 8-1/2"
• Mesh Length: 19"

Fiber Optic Pulling Grip 0.38-0.49" Condux 08643716

Fiber Optic Slack Grip - Split Mesh, Rod Closing, Single Weave steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.

808 Champion Swivel 5/8" 600 lbs. Condux 08017000

Condux 08017000 - 808 Champion Swivel 5/8" 600 lbs.(Not a Breakaway swivel)
Condux Ball Bearing Swivels are designed to the highest specifications for underground and overhead pulling applications. All swivels are tested and inspected to ISO 9001:2000 quality standards. This ensures the customer is getting the most reliable and safest swivel on the market. All swivels are precision machined from high grade stainless steel. Clevis pins are heat treated to prevent pin damage when using steel shackles. Each swivel is manufactured with three angular contact or deep groove ball bearings, which allow the swivel to rotate beyond its rated load. Most manufacturers use only one bearing to handle the load, causing the swivels to stop rotating before it reaches the recommended workload.

Break-Away Swivels Replacement Pins for 5/8" Swivel 600 lbs. Condux 08017205

Condux 08017205 Replacement Breakaway Pin for Condux 08017000 Breakaway Swivel 5/8" 600 lbs

Condux Breakaway Swivel are essential for fiber optic and coaxial cable pulling, these swivels have a break load ranging from 150-1,800 lbs. (667-8,006 N) and are designed to separate at 5 percent of their rated break load. If the load rating is exceeded, the interior break pin fractures, the swivel separates, and the cable remains undamaged.
Replacement Breakaway Pin for 5/8" Swivel 600lbs.


Condux 08017200 Breakaway Swivel 5/8" 600 lbs.
GMP 71408 Breakaway Swivel 5/8" 600lbs.

Breakaway Swivel 7/8" 1700 lbs. Condux 08017700

Condux 08017700 Breakaway Swivel 7/8" 1700 lbs

Essential for fiber optic and coaxial cable pulling, there swivels have a break load ranging from 150-1,800 pounds (667-8,006 N) and are designed to separate at ±10% of their rated break load. If the load rating exceeded, the interior break pin fractures, the swivel separates and the cable undamaged.

Fiber Optic Pulling Grip Light Duty - Standard 062.-0.74" Condux 08643128

Fiber Optic Slack Grip - Split Mesh, Rod Closing, Single Weave steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.

Breakaway Swivel 5/8" 600LB GMP 71408

GMP 71408 Breakaway Swivel 5/8"600LB
Breakaway Swivel 5/8" 600LB GMP 71408. 5/8 in. (15.88 mm) made from Steel. Our Break-away Swivels give you invaluable protection when pulling either fiber optic or coaxial cable.These simple tools provide an inexpensive fracture point between the pulling line and cable avoiding costly cable damage if the cable's rated pulling capacity is exceeded. The 5/8 in. size is extremely convenient when working with innerduct sizes below 1-5/8 in. in diameter. The design of the swivels incorporates a replaceable tension bolt that joins the barrel eye and swivel body. The bolt separates when pulling loads on the cable reach +/-5%. The damaged bolt can then be replaced in seconds using an Allen Breakaway BoltWrench (included) and screwdriver.
SUB - CON 08017200

Breakaway Swivel 7/8" 800LB GMP 53703

GMP 53703 Breakaway Swivel 800LB 7/8"
Breakaway Swivel 7/8" 800LB GMP 53703. 7/8 in. (22.23 mm) made from high quality aluminum. Break-Away Swivels provide an inexpensive fracture point between a pulling line & fiber optic cable to protect against costly cable damage if the cable's rated pulling capacity is exceeded. The 7/8" x 4 5/8" body is made of high quality aluminum alloy with a black anodized finish for wear resistance. Steel thrust washers and bushings insure smooth rotation under load and help to keep twisting forces from reaching the cable. Each unit comes with a replaceable color-coded tension bolt. The swivel & bolt are color-coded for identification. The bolt will separate when the pulling load reaches +/-5% of the bolt rating. It can then be replaced using an Allen Wrench (included) & screwdriver.
SUB - CON 08018700

Heavy Duty Ball Bearing Swivel 5000lb GMP 70137

GMP70137 SWIVEL 5000 LBS
4-5/32 LENGTH, SLOT PIN
SWIVEL HEAVY DUTY 17/32
EYE WIDTH, 1-1/4 DIAMETER,

These tough swivels are designed to handle higher thrust loads for extra cable safety and faster straight pulls. These heavy-duty swivels are built with a thrust bearing for tensile load and a radial bearing for bending load.
SUB - CON08080912

Breakaway Swivel 5/8" 450 LB GMP 71406

Breakaway Swivel 5/8" 450LB GMP 71406. 5/8 in. (15.88 mm) made from Steel. Our Break-away Swivels give you invaluable protection when pulling either fiber optic or coaxial cable.These simple tools provide an inexpensive fracture point between the pulling line and cable avoiding costly cable damage if the cable's rated pulling capacity is exceeded. The 5/8 in. size is extremely convenient when working with innerduct sizes below 1-5/8 in. in diameter. The design of the swivels incorporates a replaceable tension bolt that joins the barrel eye and swivel body. The bolt separates when pulling loads on the cable reach +/-5%. The damaged bolt can then be replaced in seconds using an Allen Breakaway BoltWrench (included) and screwdriver.
SUB - CON 08016900

Breakaway Swivel 7/8" 450LB GMP 53701

GMP 53701 Breakaway Swivel 7/8" 450 LB

Breakaway Swivel 7/8" 450LB GMP 53701. 7/8 in. (22.23 mm) made from high quality aluminum. Break-away Swivels give you invaluable protection when pulling either fiber optic or coaxial cable. These simple tools provide an inexpensive fracture point between the pulling line and cable avoiding costly cable damage if the cable's rated pulling capacity is exceeded. The design of the swivels incorporates a replaceable tension bolt that joins the barrel eye and swivel body. The bolt separates when pulling loads on the cable reach +/-5%. The damaged bolt can then be replaced in seconds using an Allen Breakaway BoltWrench (included) and screwdriver.
SUB - CON 08015800

Double Weave, Rotating-Eye Pulling Grip 1.00-1.24" Klein KPS100-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips ate rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

• KPS Heavy Duty-Medium Length
• Cable Diameter Range: 1.00-1.24"
• Approx. Breaking Strength: 2,560 lbs.
• Mesh Length: 20"

Double Weave, Rotating-Eye Pulling Grip 0.50-0.61" Klein KPS050-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

• KPS Heavy Duty-Medium Length
• Cable Diameter Range: 0.50-0.61"
• Approx. Breaking Strength: 1,120 lbs.
• Mesh Length: 16"

Double Weave, Rotating-Eye Pulling Grip 1.00-1.49" Klein KPS100-3

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

• KPS Heavy Duty-Medium Length
• Cable Diameter Range: 1.00-1.49"
• Approx. Breaking Strength: 3,280 lbs.
• Mesh Length: 33"

Junior-Duty Single Weave, Flexible-Eye Pulling Grip 1.00-1.24" Klein KPJ100

These junior duty, closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Single Weave, Flexible-Eye Pulling Grip

• Cable Diameter Range: 1.00-1.24"
• Approx. Breaking Strength: 780 lbs.
• Mesh Length: 11.5"

Junior Duty Single Weave, Flexible-Eye Pulling Grip 0.75-0.99" Klein KPJ75

These junior duty, closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Junior Duty Single Weave, Flexible-Eye Pulling Grip

• Cable Diameter Range: 0.75"-0.99"
• Approx. Breaking Strength: 560 lbs.
• Mesh Length: 10"

Double Weave, Rotating-Eye Pulling Grip 2.50-2.99" Klein KPS250-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

• KPS Heavy Duty-Medium Length
• Cable Diameter Range: 2.50-2.99"
• Approx. Breaking Strength: 6,600 lbs.
• Mesh Length: 28"

Double Weave, Rotating-Eye Pulling Grip 1.50-1.99" Klein KPS150-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips ate rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

• KPS Heavy Duty-Medium Length
• Cable Diameter Range: 1.50-1.99"
• Approx. Breaking Strength: 3,280 lbs.
• Mesh Length: 25"

Double Weave, Flexible-Eye Pulling Grip 0.50-0.61" Klein KPM050

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips ate rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Flexible-Eye Pulling Grip

• Cable Diameter Range: 0.50-0.61"
• Approx. Breaking strength: 480 lbs.
• Mesh Length: 13"

Double Weave, Rotating-Eye Pulling Grip 0.62-0.74" Klein KPS062-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating Eye Pulling Grip

• KPS Heavy Duty Medium Length
• Cable Diameter Range: 0.62-0.74"
• Approx. Breaking Length: 1,360 lbs.
• Mesh Length: 16"

Double Weave, Rotating-Eye Pulling Grip 2.00-2.49" Klein KPS200-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips ate rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

• KPS Heavy Duty Medium Length
• Cable Diameter Range: 2.00-2.49"
• Approx. Breaking Strength: 5,440 lbs.
• Mesh Length: 26"

Double Weave, Rotating-Eye Pulling Grip 3.50-3.99" Klein KPS350-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips ate rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grips

• KPS Heavy Duty-Medium Length
• Cable Diameter Range: 3.50-3.99"
• Approx. Breaking Length: 9,600 lbs.
• Mesh Length; 32"

Double Weave, Rotating-Eye Pulling Grip 0.75-0.99" Klein KPS075-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating Eye Pulling Grip

• KPS Heavy Duty-Medium Length
• Cable Diameter Range: 0.75-0.99"
• Approx. Breaking Strength: 1,360 lbs.
• Mesh Length: 20"

Slack-Pulling, Offset Flexible Eye Pulling Split Grip 0.75-0.99" Klein KSRK075-1

Split Mesh pulling-grips are used for pulling overhead or underground cable, stringing service or communication
lines into buildings, pulling wire through conduit,
and general underground construction.
Slack-Pulling, Offset Flexible Eye Pulling Grip

• KSRK Light Duty-standard Length
• Cable Diameter Range: 0.75-0.99"
• Approx. Breaking Strength: 480 lbs.
• Mesh Length: 12"
• Split Grip mesh pulling Grip

Cable Puller Strand Jig Lemco PR965

This Strand Jig Puller is used to pull out cable prior to the lashing operation. The main body of the Puller is a rugged one-piece aluminum casting.

Overlash Cable Puller Lemco PT596

This unit is designed to pull out up to four cables and works on packages up to 2 3/4" diameter. Opposing roller arms retain the puller to the existing cable and offer quick pole transfer.

Ball Bearing Swivel 5400LB Lewis HD-0

Heavy Duty Ball Bearing Swivels are available in Models HD-00, HD-0, HD-1, HD-2, HD-3 and HD-4.

Each model is different in size, specifications and ratings; but they all have the same basic design. They are specifically designed for tension stringing, and assure that conductor will remain in the neutral position during stringing of transmission or distribution lines.

These twin race ball bearing swivels are manufactured from high-grade pre-stressed steel. Proper placement of thrust and radial bearing allow thrust and shock loads to be absorbed without affecting rotation of swivel. Pins are screwdriver removable.

Swivel Eye Grip 1.5"- 2.0" 11,200LBS Lewis SEG-3

Swivel Eye Pulling Grip - Lewis SEG-3
Swivel Eye Grips are available with hardened steel rotating eyes. The eyes are durable, compact, and streamlined and will thread through blocks and sheaves without binding. The rotating eye is not a ball bearing swivel and will not turn under tension.
Mesh length 48" Size Range: 1.5" - 2.0" Working load 11,200 lbs..

Swivel Eye Grip .25" - .50" Lewis SEG-0

Swivel Eye Pulling Grip - Lewis SEG-0
The SEC Series are available with hardened steel rotating eyes. The eyes are durable, compact, and streamlined and will thread through blocks and sheaves without binding. The rotating eye is not a ball bearing swivel and will not turn under tension. It will turn to relieve pulling torque when the pulling tension is released.
Mesh length 24" Size Range: .25"- .50" Working load 1,200 lbs.