You are here: Home > Aerial Lineman Tools > Pole Pullers/Pole Jacks
We found 21 results matching your criteria.
Pole Pullers/Pole Jacks
Sort By:
1
TIIGER 1025A Two-Wheel Pole Dolly TIIGER 1025A Two-Wheel Pole Dolly Capacity 2,200 lbs.

SPECIAL ORDER ITEM

The TiiGER® Two-Wheel Pole Dolly is equipped with a high capacity roller cradle for easy transportation of poles in excess of 2,000 lbs. Large low-pressure turf tires handle any terrain and the portable design allows for quick Load Deck attachment. Designed with 180° steering for forward | backward and side-to-side motion.

Our Price: $5,505.60
Tiiger HB0006 The CUBE – Portable Gas Powered Compact Hydraulic Pump Tiiger HB0006 The CUBE – Portable Gas Powered Compact Hydraulic Pump

*USE WITH TIIGER POLE PULLER*
Full reversing control. The Cube is equipped with a commercial grade gasoline engine for years of trouble free service and all terrain pneumatic tires for easy portability.10" All terrain pneumatic tires for easy portability on most surfaces. 3/4 Inch steel handle for lasting durability and quality. 1 1/2 Gallon hydraulic fluid reservoir, 1" steel tubing frame and a 4 way/ 3 position manual valve with relief. pole puller, Tiiger hydraulic utility pole puller, pole pulling equipment.

Our Price: $4,823.14
Slingco TPE09386 Pole Puller *Slingco TPE09386 Pole Puller Deluxe

The Slingco Deluxe Pole Puller system includes the pole puller pad and back plate weldment. The pole puller pad has studs which keep the base plate in the optimum position when pulling poles. The back plate weldment has angled teeth to increase hold on the pole during extraction.

Slingco’s pole puller offers a low point of attachment making it easy to remove even broken or cut poles.

  • Low point of attachment
  • 50,120 lbs lift at max pressure
  • Deluxe System complete with back plate weldment & pad

Our Price: $3,982.86
TiiGER-4001D Hydraulic Pole Puller *Tiiger 4001D Hydraulic Pole Puller

Hydraulic Pole Puller

TiiGER 4001D hydraulic pole puller. Remove wood poles and metal poles safely and efficiently with the TiiGER® Hydraulic Pole Puller. At 57 pounds, our Pole Puller is the lightest and safest on the market. Utilizing a swivel and back plate, a chain provides maximum grip as the hydraulic cylinder removes the pole. The low attachment point allows chain and back plate to grip cut poles up to 14” from the ground. To minimize tip-ping, base plate has the lowest possible center of gravity. The TiiGER 4001D Pole Puller can be disassembled for easy transport and storage

Our Price: $3,982.86
TIIGER  Steel Pole Puller Clamshell TIIGER Steel Pole Puller Clamshell

The steel clamshells are manufactured with high yield steel and coated with a proprietary coating, which secures the attachment to the metal pole.

  • Small TII SP1000 Pole Size 8" to 12"
  • Medium TII SP1100 Pole Size 12" to 16"
  • Large TII SP1200 Pole Size 16" to 20"

Our Price: $3,463.14
Simplex RJA1538 Ratchet Jack, 15 ton - Utility Pole Jack Ratchet Jack, 15 Ton Capacity, 21.25 in Stroke, Aluminum Housing Simplex RJA1538 - Utility Pole Jack

RJA1538, Ratchet Jack, 15 ton (71,2 kN) Capacity, 21.25 in (539,8 mm) Stroke, Aluminum Housing

Description:
  • Light weight aluminum alloy housing is used for pole lining maintenance by telephone, light and power, and railroad companies.
  • Double-lever sockets for jacking in close quarters.
  • Drop-forged, alloy steel, heat treated components.
  • Plated springs to resist corrosion.
  • Large base insures a firm foundation.
  • Supports full rated capacity on the toe or the cap.
Model # : RJA1538
Name : Utility Pole Jack
Capacity : 15 ton
Stroke : 22 inch
Weight : 62 lbs.

Our Price: $2,827.00
Tiiger HA0060 Deluxe Storage Case With Forklift Clearance Tiiger HA0060 Deluxe Storage Case With Forklift Clearance

Accommodates all the components including the pad. Perfect organizer for pole puller components. Securely positions & holds all components.

 
 

pole puller, tiiger hydraulic utility pole puller, Pole Pulling Equipment.

Our Price: $2,492.92
Tiiger HA0061W Wheeled Storage Case With Pull Handle Tiiger HA0061W Wheeled Storage Case With Pull Handle

Accommodates all the components excluding the pole puller pad and is available with an optional wheel and handle kit. Perfect organizer for pole puller components. Securely positions & holds all components. Safest and most efficient for storing the pole puller.




pole puller, tiiger hydraulic utility pole puller, pole pulling equipment

Our Price: $1,989.00
Simplex 10760  - 5/8  29 lbs, Heavy Duty Alloy Chain for RJ Ratchet Jacks 5/8, 29 lbs, Heavy Duty Alloy Chain for RJ Ratchet Jacks Simplex 10760

Simplex 5/8 Pole Jack Chain 10760 for Simplex pole jack used to wrap around telephone pole and attach to pole
jack for lifting or loosening pole in ground. Used for the Simplex A1538 Utility Pole Jack.

Our Price: $818.00
Slingco TPE09682 Utility Pole Stand Framing and Installation Slingco TPE09682 Utility Pole Stand Framing and Installation

Slingco makes utility pole framing and installation easier and more cost-effective than ever.
Slingco stores flat on any work vehicle and — with a few twists — transforms into the industry's most helpful device. Whether you're performing regularly scheduled pole replacement or if you're reacting to a natural disaster, Slingco gets the job done safer, faster and easy.
COMPACT: Folds to 3” x 23” x 30” for easy storage.
LIGHTWEIGHT:
Only weighs 33 pounds.
STRONG:
Supports poles from 30’ to 70’.
STABLE:
Stays put on even and uneven ground.
Poleprop Utility Pole Framing

Our Price: $585.35
Tiiger HA0040 Pole Puller Pad Tiiger HA0040 Pole Puller Pad

*USE WITH TIIGER POLE PULLER*
Designed to lock the base plate in position, eliminating any potential for slippage of the assembly, enhancing the overall efficiency of the pole puller. pole puller, tiiger hydraulic utility pole puller, pole pulling equipment

Our Price: $510.00
TII EF001 Steel Alloy Chain 1/2″ x 6 ft.  for Pole Puller TII EF001 Steel Alloy Chain 1/2″ x 6 ft. for Pole Puller

TiiGer Pole Puller  Chain - 6 Feet - 1 /2 Alloy 15 pounds

Our Price: $500.00
Manta Ray Hydraulic Hose 25' HC-16-25 with HTMA-3A Coupler Manta Ray Hydraulic Hose 25' HC-16-25 50087 with HTMA-3A Coupler *EACH*

Manta Ray HC-16-25, a 25' (7.6m) Hydraulic Hose with HTMA-3A Flush Face Coupler.

*Two are required for Manta Ray and/or Pole Puller Operations*

Our Price: $453.77
Simplex IB1538, 20", 44 lbs,  I-Beam Base for RJ Ratchet Jacks Simplex I-Beam Base 20" for RJ Ratchet Jacks Simplex 10800

Simplex 10800- IB1538 I-Beam Base 20'' for RJA1538 Assures Firm Foundation. Alloy Steel Chain, for utility pole jack.
BASE ONLY.

Our Price: $428.00
TIIGER 4040B Standard Tooth Back Plate for Pole Puller TIIGER 4040B Standard Tooth Back Plate for Pole Puller

*USE WITH TIIGER POLE PULLER*
Tiiger’s 4040B Standard Tooth Back Plate has 3/4″ long teeth. Designed for use with Tiiger’s Pole Puller Assembly.

Plate Makes It Easy to Stop Chain Slippage On Hard, Small-Diameter, or Greasy Poles. Long Tooth Plate For Poles With Severe Shell Rot Only

Our Price: $301.37
TIIGER 4041B Long Tooth Back Plate for Pole Puller TIIGER 4041B Long Tooth Back Plate for Pole Puller

*USE WITH TIIGER POLE PULLER*
Tiiger’s 4041B Long Tooth Back Plate has 1-1/2″ long teeth. Designed for use with Tiiger’s Pole Puller Assembly.

Plate Makes It Easy to Stop Chain Slippage On Hard, Small-Diameter, or Greasy Poles. Long Tooth Plate For Poles With Severe Shell Rot Only



Our Price: $297.86
Simplex SLB70  72 in., 20 lbs, Chisel Point Steel Lever Bar 72 in., 20 lbs, Chisel Point Steel Lever Bar Simplex SLB70

Simplex SLB70 Chisel Point Lever Bar, 72" in length with a 1.25" Diameter, is used with specific Mechanical Jacks.

Our Price: $208.00
Jameson RD-UNI Ground Rod Driver, Universal Jameson RD-UNI Ground Rod Driver, Universal

Jameson Universal Ground Rod Driver eliminates the need to climb above the rod for installation. It’s designed with a unique positioning guide pin, which allows the driver socket of the impact tool to be engaged to the Ground Rod Driver. You can position it at any height for installation.

Our Price: $78.99
HST 800801002 Female Quick Connect hydraulic fitting Female Quick Connect hydraulic fitting HST 800801002

Female Quick Connect Hydraulic Coupler fitting w/ HTMA flat face 3/4 NPT female threads. ONE EACH ARE REQUIRED FOR TIIGER POLE PULLER

Our Price: $73.08
JAMESON RD0058 Tiiger Ground Rod 5/8 Driver JAMESON RD0058 Tiiger Ground Rod 5/8 Driver

Jameson Ground Rod Driver eliminates the need to climb above the rod for installation. It’s designed with a unique positioning guide pin, which allows the driver socket of the impact tool to be engaged to the Ground Rod Driver. You can position it at any height for installation.

Our Price: $58.99
HST 800801003 Male Quick Connect hydraulic fitting Male Quick Connect hydraulic fitting HST 800801003

Male Quick Connect Hydraulic Coupler fitting w/ HTMA flat face 3/4 NPT female threads.ONE EACH ARE REQUIRED FOR TIIGER POLE PULLER

Our Price: $38.25
   
 
1