You are here: Home > Underground Tools
We found 420 results matching your criteria.
Underground Tools
Sort By:
1 2 3 ... 6
ELK RIVER 05632 EZE-Man Confined Space Manhole Retrieval System 50' ELK RIVER 05632 EZE-Man Confined Space Manhole Retrieval System 50'

Elk River 05632 EZE-Man Confined Space System 50'
Elk River is the field-proven leader in tripod entry and rescue systems. Confined space Entry and Rescue Systems are designed for lowering and lifting personnel into and out of confined spaces where a tripod system is required. This system is Man-Rated to 310 lbs.

*Elk River 25999 Two Leg Bridle with 30" Spreader Bar (YOKE) is NOT INCLUDED*
*
Elk River 42559 Universal Retrieval Harness is NOT INCLUDED*
Elk River's Universal Series Harness has the perfect fit for all your needs. The Universal full body harness combine the simplicity of easy functional design with the economy of one size fits many users. Designed to fit most workers in the range of 130-350 lbs. This versatile and useful universal fit harness features spring-loaded adjustment buckles
on the shoulder straps for easy adjustment and a comfortable custom fit.
Features:

  • Five D-rings: at back, hips, and shoulder
  • Fits Sizes Medium to 2-XL
  • Man rated to 400 lbs.
  • Mating buckle on chest strap
  • Tongue buckles on leg straps
  • Shoulder adjuster
  • Used with Elk River's 05632 Manhole Retrieval System
Features:
  • Tripod Head: Powder Coated Cast Aluminum; contains 2 spring loaded pulleys and 2 eye bolts
  • Legs: Cast Aluminum; auto lock in the open position; spiked feet pivot for soft or hard surfaces; foot-strap is not required
  • Winch: Galvanized and Carbon Steel; Galvanized Wire 65'; Auto Lock Brake; Steel Swivel Eye Snaphook
  • Fall Arrest Block w/ Recovery: Aluminum Housing; Galvanized Wire Rope 50'; Steel Swivel Eye Carbiner, Emergency Recovery
  • Fall Arrest Block: Thermoplastic Housing; Galvanized Wire Rope 50'; Swivel Steel Hook
  • Height: Maximum Headroom 7' 5"
  • Diameter Inside of Feet: Maximum 52'
  • Length: Collapsed 6' 2"
  • Application Use: General / Construction / Industrial
  • Components Meet or Exceed: EN795 EN1496 CLASS B EN360 ANSI Z35.1-2007

Our Price: $3,693.69
Jameson 6-14-AK Accessory Kit for Easy Buddy 1/4" Jameson 6-14-AK Accessory Kit for Easy Buddy 1/4"

Jameson 6-14-AK Accessory Kit for Easy Buddy 1/4" contains: splice ferrule, end ferrule, pulling eye, adhesive, emery cloth, canvas pouch, and instructions.

Our Price: $38.72
CON-08013100 INNERDUCT SLITTER CONDUX 08013100

The Innerduct Slitter is designed for fast, safe cutting of innerducts from 1" (25 mm) to 2" (51 mm). HDPE Slitter.1.25"-2.0"Range.

INNERDUCT SLITTER CONDUX 08013100

Our Price: $362.64
Condux 08617215 Cable Feeding Sheave 1 1/2" Condux 08617215 Cable Feeding Sheave 1 1/2"

Condux 08617215 Cable Feeding Sheave plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 1.04"
Slot Length 5"
I.D Tube Width 1.25"
O.D. Tube Width 1.44"
Load Capacity 1500 Lbs

Our Price: $292.16
Condux 08761842 Pulling Eye, Inner-Duct 1-1 1/4" Condux 08761842 Pulling Eye, Inner-Duct 1-1 1/4"

Condux 08761842 Pulling Eye, Inner-Duct 1-1 1/4"
The Inner-duct Pulling Eye is a hybrid tool that combines features from standard inner-duct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the inner-duct as it is installed. It eliminates the need for a separate swivel on each pulling eye when installing single innerducts into individual conduits or multiple inner-ducts into a single conduit. Its short length is an advantage on tight bends compared to using a separate swivel and pulling eye. Easily installed using a 13⁄8" deep socket or adjustable wrench.
Specification:
ID Range: 1.06-1.43"
Max OD: 1.75"
Hole Dia: .44"
Slot Width: .56"
Slot Depth: 1.31"
Pin Dia: .44"
Pin center: .56"

Our Price: $88.76
Condux 08764142 Clamp, Inner-Duct 10mm Condux 08764142 Clamp, Inner-Duct 10mm

Clamp, Inner-Duct
Duct OD: 0.39" (10mm)

Our Price: $299.08
Condux 08764143 Seal, Inner-Duct 10mm Condux 08764143 Seal, Inner-Duct 10mm

Condux 08764143 Seal, Inner-Duct
Duct OD: 0.39" (10mm)

Our Price: $342.99
Condux 08042301  Nylon Cable Protector 1"-2 1/2" Condux 08042301 Nylon Cable Protector 1"-2 1/2"

Condux Nylon Cable Protector is a Flanged, split tube to insert in duct end and protect cable from damage during installation. Can be left in place for permanent protection.
Conduit Size: 1'-2 1/2' (25-63mm)

Our Price: $4.15
Condux 08042300 Nylon Cable Protector 3"-6" Condux 08042300 Nylon Cable Protector 3"-6"

Condux Nylon Cable Protector is a flanged, split tube to insert in duct end and protect cable from damage during installation. Can be left in place for permanent protection.
Conduit Size: 3"-6" (76-152mm)

Our Price: $5.55
Condux 08023012 Hand Hole Hook with 1/2" Socket Drive Condux 08023012 Hand Hole Hook with 1/2" Socket Drive

Condux 08023012, this 27" Hand Hole Hook lightens the load with it's 1/2" socket drive conveniently located in the handle, can easily unlock then hook and pull up any conventional man-hole with little effort.This man-hole hook has 70 lbs workload. Hook ONLY.

Our Price: $57.22
Condux 08023010 Hand Hole Hook with 7/8" Penta Socket Condux 08023010 Hand Hole Hook with 7/8" Penta Socket

Condux 08023010, this 27" Hand Hole Hook lightens the load with its 7/8" penta socket that is applied on a 1/2" socket drive that is conveniently located at the end of the handle bar. which can easily unlock then hook and pull up any conventional man-hole with little effort. This Hand hook has a 70 lbs workload.

Our Price: $139.19
Condux 08023003 36" Manhole Cover Lifting Hook with 90 degree Rotated Rocker Head Condux 08023003 36" Manhole Cover Lifting Hook with 90 degree Rotated Rocker Head

Condux 08023003, this 36" Manhole Cover Lifting Hook that is composed of 5/8" Hex high carbon steel that is painted blue for corrosion resistance and identification purposes. It has a large round open handle for convenient gripping, the hook has a 90 degree, rotated rocker head to easily access the notch in any cheeky manhole cover.

Our Price: $53.47
Condux 08088800 Corner Cable Guide 8" Condux 08088800 Corner Cable Guide 8"

Condux 08088800 Corner Cable Guide for pulling cable into manhole.

  • Maximum Cable Diameter: 8.25"
  • Maximum Working Load: 5,000 lbs.
  • Aluminum and Nylatron Cable Sheaves compatible
  • Replacement Sheave/Rollers: 08087911 8 x 11"
*Condux 08091440 Support Bar not included

Our Price: $1,919.20
Condux 08091440 Support Bar  1-1/4" X 4' Condux 08091440 Support Bar 1-1/4" X 4'

Condux 08091440, Support bar is used to support quadrant blocks or cable guides at street level.

  • 1-1/4"(32mm) X 4'(1.2m)
*Support Bar ONLY

Our Price: $56.66
Condux 08617312 Cable Feeding Sheave 1-1/4" Condux 08617312 Cable Feeding Sheave 1-1/4"

Condux 08617312 Cable Feeding Sheave plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 0.88"
Slot Length 5"
I.D Tube Width 1.06"-1.19"
Load capacity 1500"


Our Price: $228.92
Condux 08617220 Cable Feeding Sheave 2" Condux 08617220 Cable Feeding Sheave 2"

Condux 08617220 Cable Feeding Sheave plugs into conduit in manhole wall, guiding cable safely into conduit regardless of pulling angle.
Specifications:
Slot Width 1.38"
Slot Length 6"
I.D Tube Width 1.75"-1.95"
Load capacity 2600"


Our Price: $292.16
Jameson 16-14-AK Duct Hunter Accessory Kit for 1/4" Jameson 16-14-AK Duct Hunter Accessory Kit for 1/4"

The Duct Hunter Accessory Kit is designed for 1/4-inch diameter fiberglass rod and includes everything you need to splice broken rod or replace end ferrules on the job site. All items store in a canvas pouch that attaches to the rodder frame for easy access. For use with fiberglass rod measuring 1/4 inch in diameter Includes a canvas pouch with (1) heavy-duty spring leader with chain, (1) end ferrule, (1) splice ferrule, (2) emery cloths, (2) two-component epoxy adhesive sets and (1) piece of heat shrink tubing.

Our Price: $142.47
Jameson 6-170 Sonde Adapter 1/4" for Easy Buddy Duct Rodder Jameson 6-170 Sonde Adapter 1/4" for Easy Buddy Duct Rodder

The 1/4" Sonde Adapter is used with Jameson's Buddy System of Conduit Rodders or the Duct Hunter System of Traceable
Rodders to locate in underground pipes or conduit. Sonde Adapters vary in size. This adapter fits the 1/4" Easy Buddy Duct Rodder.
Size: 1/4"

Our Price: $16.81
Replacement Rod 3/8" x 400' for Good Buddy Jameson 9-400ROM Replacement Rod 3/8" x 400' for Good Buddy Jameson 9-400ROM

The 3/8" OD Good Buddy is designed especially for manhole-to-riser and riser-to-riser jobs. It is also perfect for cable vaults and running larger conduit in buildings. Available in lengths of 300 and 400 feet. The Good Buddy is built to rod or fish conduit ranging from 2” to 4”. With a solid fiberglass non-conductive core rod and polymer outer sheath, the Good Buddy offers unparalleled strength, flexibility and safety. Its polymer coating protects the external rod surface from abrasion and provides a self-lubricating outer surface. *Rod ONLY
Features:

  • Folds to 10" width for carrying into manholes
  • 7" Bending Radius
  • 1,000-Lb Tensile/Pull Strength
  • Rod Only 3/8" x 400' Marked

Our Price: $750.40
GMP 70565 Manhole Conduit Feeding Sheave for 4" Duct Schedule 40 GMP 70565 Manhole Conduit Feeding Sheave for 4" Duct Schedule 40

The GMP 70565 Cable Feeding Sheave, for the 4" duct schedule 40, slides into the end of conduit in a manhole wall, allowing the cable being fed into the conduit to roll smoothly over sheave from all angles. It has a frame made of steel for durability while the sheave is made from aluminum alloy with self lubricating bearings.The sheave has a split tube for easy convenient removal after cable is installed.

Our Price: $488.00
GMP 70570 Manhole Conduit Feeding Sheave for 3" Duct Schedule 80 GMP 70570 Manhole Conduit Feeding Sheave for 3" Duct Schedule 80

The GMP 70570 Cable Feeding Sheave, for the 3" duct schedule 80, slides into the end of conduit in a manhole wall, allowing the cable being fed into the conduit to roll smoothly over sheave from all angles. It has a frame made of steel for durability while the sheave is made from aluminum alloy with self lubricating bearings.The sheave has a split tube for easy convenient removal after cable is installed. * GMP 70570 ONLY

Our Price: $450.00
GMP 70670 Double Weave-Single Flexible Pulling Grip 0.33-0.78" GMP 70670 Double Weave-Single Flexible Pulling Grip 0.33-0.78"

The GMP Double Weave Pulling Grip is manufactured for high-tensile, galvanized steel wire that is evenly hand woven in a single, double or triple wire weave according to pulling tension requirements. GMP reverse weave our grips which create a loop at the end of the grip instead of being crimped or soldered together. the wire is then joined under the crimped head. This creates a higher quality product that outlasts competition.
Double Weave Single Flexible Eye
Cable Diameter: 0.33-0.78" (10-20mm)
Grip Length: 23.62" (600mm)
Min. Breaking Strength: 4101 lbs.

Our Price: $48.00
GMP 71717 Replacement Sheave Pin 1-5/16 X 5" for Jamb Skid GMP 71717 Replacement Sheave Pin 1-5/16 X 5" for Jamb Skid

GMP 71717, Replacement Sheave Pin to lock the jamb skid height and secure sheave or quadrant block.
The 70640 Jamb Skid is used to support quadrant block and sheave when pulling cable through underground conduit.
Sheave Pin Diameter: 1-5/16 X 16"(33mm)

Our Price: $61.50
GMP 74097 Brass Cable Guiding Bullet Heads 6mm GMP 74097 Brass Cable Guiding Bullet Heads 6mm

GMP 74097, Brass Cable Guiding Heads, are screwed on to the end of the cable to reduce friction during cable blowing. these bullet heads are constructed of corrosion resistant brass and made for repeated use.
Size OD: 6mm (0.24")

Our Price: $122.00
GMP 74099 Brass Cable Guiding Bullet Heads 7mm GMP 74099 Brass Cable Guiding Bullet Heads 7mm

GMP 74099, Brass Cable Guiding Heads, are screwed on to the end of the cable to reduce friction during cable blowing. these bullet heads are constructed of corrosion resistant brass and made for repeated use.
Size OD: 7mm (0.28")

Our Price: $135.00
GMP 74100 Cable Guiding Bullet Heads 8mm GMP 74100 Cable Guiding Bullet Heads 8mm

GMP 74100, Brass Cable Guiding Heads, are screwed on to the end of the cable to reduce friction during cable blowing. these bullet heads are constructed of corrosion resistant brass and made for repeated use.
Size OD: 8mm (0.32")

Our Price: $155.00
Ground Hog SD12 Standard 12" X 3' Auger for Earth Drill Ground Hog SD12 Standard 12" X 3' Auger for Earth Drill

The Ground Hog SD12 Standard Auger has a standard-style digging head for loose/sandy soil condition. This 12" Auger uses a screw-in fishtail centered pilot and bolt-on wide flat, hardfaced, standard side blades. All Ground Hog Augers are approximately
38"(3') in length and utilize a 7/8" standard square drive for interchangeability between Earth Drills.
Feature:

  • Part #100 Fishtail Pilot(1)
  • Part #912 Side Blade Installed(1)
  • Part #1300 Attachment Pin & Clips(1)
  • 7//8" Square Drive for interchangeability
  • Durable Powder-Coated Finished
  • 12" hole diameter

Our Price: $198.33
Ground Hog PSD8 Pengo-Style 8" X 3' Auger for Earth Drill Ground Hog PSD8 Pengo-Style 8" X 3' Auger for Earth Drill

The Ground Hog PSD8 Pengo 8" Auger features heat treated cast alloy steel boring heads with hardened forged steel side blades and a bolt-on cast alloy steel centered pilot bit. The Pengo Series augers are general purpose augers and are the best choice for tough soil conditions. All Ground Hog Augers are approximately 38"(3') in length and utilize a 7/8" standard square drive for interchangeability between Earth Drills.
Features:

  • Part # SB-25 Pilot Bit(1)
  • Part # 35 Side Blades Installed(2)
  • Part # 1300 Attachment Pin & Chip
  • 8" hole diameter
  • 7//8" Square Drive for interchangeability
  • Screw-in hardfaced alloy steel pilot bit
  • Durable Powder-Coated Finish
  • Replaceable Forged Steel Side Blades

Our Price: $233.75
Condux 02273600 Dynamometer Chart Recorder Paper for Electrical Control Box Condux 02273600 Dynamometer Chart Recorder Paper for Electrical Control Box

Condux 02273600, Dynamometer Chart Recording Paper for Old style Electrical Control Box.

Our Price: $93.38
Condux 08017200 Breakaway Swivel 5/8" 600 lbs. Condux 08017200 Breakaway Swivel 5/8" 600 lbs.

Condux 08017200 Breakaway Swivel 5/8" 600 lbs.
Essential for fiber optic and coaxial cable pulling, these swivels have a break load ranging from 150–1,800 pounds (667–8,006 N) and are designed to separate at ±10% of their rated break load. If the load rating is exceeded, the interior break pin fractures, the swivel separates, and the cable remains undamaged.
Size: 5/8"
Specifications:
Length: 3.56" (90mm)
Diameter: 0.625" (16mm)
Entire Slot Depth: 0.79" (20mm)
Pin Center: 0.37" (9mm)
Pin Diameter: 0.25" (6mm)
Slot Width: 0.28" (7mm)
Break Load (Underground): 600 lbs. (2669 N)
Break Load (Aerial): 360 lbs (1601.36 N)

Our Price: $132.97
Condux 08030300 Plastic Line Carrier 4" Condux 08030300 Plastic Line Carrier 4"

Condux 08030300 Line Carrier 4", is a fast and efficient plastic carrier for fishing with high-speed blowers even in out-of-round duct and will travel over any minor obstruction that might be inside the duct.
Specifications:
Duct Size: 4" (102mm)
Maximum OD: 4.06" (103mm)

Our Price: $37.88
Condux 08033442 Swivel Coupling 5/16-18MF Condux 08033442 Swivel Coupling 5/16-18MF

Condux 08033442 Swivel Coupling, used to connect two duct rods pushed into the conduit from the same end used when one length of duct rod is not long enough for the full conduit run. Also used as a rotating swivel when pulling or rope with pulling wire or rope with Tapered head or Mini-Harness.
USC Thread: 5/16-18

Our Price: $36.75
Condux 08773501 APS75 Underground Cable Puller Trailer lbs. Condux 08773501 APS75 Underground Cable Puller Trailer 7500 lbs.

Condux 08773501 Hydraulic Underground Cable Puller Trailer, provides up to 7,500 lbs. of continuous pulling applications. Designed for installing underground cable, the APS75 is completely self contained and transport easily from job-site to job-site. This trailer is made with precision manufacturing, to the highest standards. Each puller is backed with years of underground cable pulling experience and a commitment to quality service.
Features:

  • Comes standard with 2600 ft. of Anti-twist Rope
  • Digital Monitoring System with USB connection to record & download pulling operations
  • Rotating Pulling Arm pivots 15 degrees in either direction
  • Wired Remote Control
  • Hydraulic tool circuit to operate additional tools
  • Easy access diesel engine for maintenance
  • Electric brakes
  • Numerous adjustable supports for optimum stability
  • DOT Ceritified Trailer
Advantages:
  • Nylatron Rollers have a super hard surface & last longer than conventional cast rollers
  • Easy to read Electronic Control Panel
  • Harden surface rollers
  • Dynamo-meter integrated in the puller
  • Controlled pay-in and out offer more operator safety
  • Smooth pull operation
  • Self contained trailer reduces noise
  • Low center of gravity
  • Excellent F/R weight

Our Price: $91,855.67
Milwaukee 2470-21 M12 Cordless PVC Shears Kit Milwaukee 2470-21 M12 Cordless PVC Shears Kit

Milwaukee 2470-21
M12 Cordless Plastic Pipe Shear Kit

Milwaukee's PVC Shears cuts cleaner, faster, closer, and longer than traditional plastic pipe shears with over 200 cuts one battery charge.The M12 Plastic Pipe Shears can cut through 2" schedule 80 PVC in three seconds or less. It's razor-sharp pierce-point leaves material clean, burr-free, and ready for installation, minimizing time spent on the job. Instantly open the jaw to increase productivity in repetitive cuts by using the tools quick blade release, and expect more work from the your tool with a 3mm stainless steel blade and aluminum jaw that resists impact, water, and rust. Powered by M12 Red Lithium Battery, you get more power and longer run-time for maximum cuts per change fuel gauge helps monitor the charge, so there's less downtime on the job.
Specification:

  • Length: 14-3/8"
  • Battery: Lithium-Ion
  • Charger: 12V Charger
  • Switch type : Two-Action Speed with reverse
  • Torque: 1,900 in-Ibs.
  • Capacity: 2" Schedule 80 PVC
  • Blade: 3mm Reinforced Stainless Steel
  • Material: PVC, CPVC, ABS, BlazeMaster, PEX Tubing, Non-metallic Conduit, Rubber Hose
  • Battery: M12
  • Power Source: Cordless

Our Price: $237.33
Condux 08041520 Aluminum Split Bells 2" Condux 08041520 Aluminum Split Bells 2"

Condux 08041520 Aluminum Split Bells 2"
Condux Aluminum Split Bells plugs into conduit in manhole wall, guiding cable safely into the conduit
regardless of pulling angle.
Specification:

  • Size: 2" (51 mm)
  • Tube Length: 8" (203 mm)
  • Tube I.D. : 1.63" (41 mm)
  • Tube O.D. : 1.88" (48 mm)

Our Price: $211.54
Condux 08041530 Aluminum Split Bells 3" Condux 08041530 Aluminum Split Bells 3"

Condux 08041530 Aluminum Split Bells 3"
Condux Aluminum Split Bells plugs into conduit in manhole wall, guiding cable safely into the conduit
regardless of pulling angle.
Specification:

  • Size: 3" (76 mm)
  • Tube Length: 8" (203 mm)
  • Tube I.D. : 1.63" (41 mm)
  • Tube O.D. : 2.88" (73 mm)

Our Price: $230.37
Condux 08041535 Aluminum Split Bells 3.5" Condux 08041535 Aluminum Split Bells 3.5"

Condux 08041535 Aluminum Split Bells 3.5"
Condux Aluminum Split Bells plugs into conduit in manhole wall, guiding cable safely into the conduit
regardless of pulling angle.
Specification:

  • Size: 3.5" (89 mm)
  • Tube Length: 8" (203 mm)
  • Tube I.D. : 3.13" (79 mm)
  • Tube O.D. : 3.38" (88 mm)

Our Price: $236.81
Condux 08041540 Aluminum Split Bells 4" Condux 08041540 Aluminum Split Bells 4"

Condux 08041540 Aluminum Split Bells 4"
Condux Aluminum Split Bells plugs into conduit in manhole wall, guiding cable safely into the conduit
regardless of pulling angle.
Specification:

  • Size: 4" (102 mm)
  • Tube Length: 8" (203 mm)
  • Tube I.D. : 3.63" (92 mm)
  • Tube O.D. : 3.88" (98 mm)

Our Price: $243.25
Condux 08041550 Aluminum Split Bells 5" Condux 08041550 Aluminum Split Bells 5"

Condux 08041550 Aluminum Split Bells 5"
Condux Aluminum Split Bells plugs into conduit in manhole wall, guiding cable safely into the conduit
regardless of pulling angle.
Specification:

  • Size: 5" (127 mm)
  • Tube Length: 8" (203 mm)
  • Tube I.D. : 4.63" (117 mm)
  • Tube O.D. : 4.88" (124 mm)

Our Price: $317.40
GMP89011 M17 Kaeser Air Compressor GMP89011 M17 Kaeser Air Compressor

Condux 08785000 Mobiliar M17 Air Compressor with Aftercooler / Air Conditioner, is a rugged and dependable unit that is perfect for variety of applications with a folding handle, oversized pneumatic tires, and compact compact design, this unit is easy to move around virtually any job-site. The M17 features Kaeser's power saving Sigma Profile airend. This efficient Kaeser design maintains steady pressure and puts out more air per hp, saving you gas. Driving these airend is a quiet but powerful Honda engine with modulation control which matches air output to the load demand. It has a simple electric starter electric starter with keyed ignition and an easy-to-read control panel. The scratch, dent and impact resistant rotomolded polyethylene shell takes a beating and protects the unit. Inside, the compressor are protected by 4 micron inlet filters rated at 99.9% efficiency, allowing this unit to operate in virtually any environment
Features:
• Single stage, oil injected rotary screw airend with power-saving proprietary Sigma Profile

• 4-cycle, V-twin industrial duty Honda engine

• Engine rated 21 hp

• Uses lead-free gasoline

• Compressor and engine are disengaged for easy starting, even in cold conditions

• Convenient one-touch electric start

• Belt-driven with a three-groove power band

• Control panel displays pressure and hour meter

• Protective rotomolded polyethylene enclosure

• Vibration isolation for smooth, quiet operation

• 4 micron air intake filters protect the airend

After-cooler cools the air and removes the moisture from the air lines

Our Price: $13,685.00
CALAM 7112-035-057 Simplex Wedge Seal 1.25" CALAM 7112-035-057 Simplex Wedge Seal 1.25"

Cal Am 7112-035-057 Simplex Wedge Seal 1.25"
Cal Am Wedge Seals provide a quick and easy-to-use system to protect and organize acts and cables for fiber optic, telecommunications and electrical application. Cal Am devices consists of a thermoplastic elastomer seal, split to ease cable installation, inner and outer wedge force the seal to firmly grasp the pipe or cable creating a tight, rain-proof seal.
Specifications:
Size: 1.25"
Nominal Inner Diameter: 1.22" - 1.36"
Range: 0.35" - 0.57"

Our Price: $4.91
IGLOO 00025041, Wire Truck Rack for 2-5 gallon Water Jugs IGLOO 00025041, Wire Truck Rack for 2-5 gallon Water Jugs

IGLOO 00025041, Wire Truck Rack for 2-5 gallon Water Jugs
Keep your coolers strapped down in the back of the truck with the igloo Wire Truck Rack.
Specifications/Features:

  • Fits 2-5 gallon Igloo beverage coolers, including 5-gallon roller
  • Heavy duty metal wire construction with welded joints for durability
  • Treated surface with stands tough outdoor conditions
  • Durable, adjustable webbed cinch strap metal buckle firmly holds cooler in place
  • Positions coder at the perfect height for easy height for easy access
  • Exterior Dimension: 14.56" X 11.06' X 10.81" (36.99 cm x 28.1 cm x 27.46 cm)

Our Price: $68.77
IGLOO 385-431 400 Series Water Cooler 3 Gallons IGLOO 385-431 400 Series Water Cooler 3 Gallons

IGLOO 385-431 400 Series Water Cooler 3 gallons
Specifications/Features:

  • Ultratherm® insulation for maximum cold retention and maintains ice for up to 3 days in temperatures as high as 90°F
  • HDPE hide won't chip, peel, buckle, or rust
  • UV stabilizers prevent fading, cracking in all exposures
  • Front push-button spigot is drip-resistant
  • White FDA Grade liner is easy-to-clean and resists stains and odors
  • Wide mouth pressure fit lid for easy filling
  • Keeper cord prevents lid loss
  • Color: Yellow/Red
  • Material: Plastic
  • Type: Insulated Water Cooler
  • Height: 14"
  • Width: 13-1/2"

Our Price: $34.90
RKI GX-3R Model 4 Gas Monitor RKI GX-3R Model 4 Gas Monitor

RKI GX-3R Model 4 Gas Monitor
The GX-3R is the worlds smallest 4 gas monitor weighing only 3.52 ounces and can comfortably be clipped within a worker’s breathing zone (2.2” W x 2.55” H x 1.02” D). It simultaneously monitors and displays LEL combustibles, O2, CO (Hydrogen compensated CO also available), and H2S.

The GX-3R represents the latest evolution of gas detection technology utilizing a new generation of micro sensors. The LEL sensor has a unique design with two active filaments in one sensor to increase it’s resistance to silicone poisoning. If one filament gets poisoned the second filament takes over. The new O2 sensor is electrochemical with a 3 to 5 year life span. H2S and CO are now available in a combo micro sensor.
Safety supervisors will appreciate the non-compliance indicator. The instrument flashes it’s 3 LED lights every 30 seconds in the following conditions; if the instrument has not been bump tested, or if calibration is due, or if there was a gas alarm event. The 3 LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved. The 30 second interval is adjustable.
Features/Specification:

  • Smallest & lightest 4 gas monitor
    • 2.2″ W x 2.55″ H x 1.02″ D, 3.52 ounces
  • Simultaneous detection of 4 gases
    • LEL, O2, H2S & CO
    • H2 Compensated CO sensor available
  • Simple 2-button operation
  • Non-Compliance Indicator
  • Alarms: audible, visual, & vibration
  • 3 user adjustable alarm levels
  • Impact resistant body with removable rubber boot
  • Large LCD Auto-backlit display
  • 25 hours of operation (Lithium-ion battery)
  • Field replaceable sensors & filters
  • Water and dust resistant design, IP66/68
  • Total Gas: LEL/O2/H25
  • Detection Range: 0 ~ 100% LEL (HC/CH4) , 0 ~ 40 VOL % (O2), 0 ~ 2000 PPM (C0), 0 ~ 200 PPM (H25)
  • Sampling Method: Diffusion
  • Type of alarm: Gas alarms, fault alarms
  • Display of alarm: Flashing light, buzzer, vibration
  • Explosion Proof: Intrinsically safe
  • Operating Temperature & Humidity: -20°C ~ +50°C [ -4°F ~ +122°F ] 10 to 90% RH, non-condensing (continuous environment)
    -40°C ~ +60°C [ -40°F ~ +140°F ] 0 to 95% RH, non-condensing (temporary environment)
  • Response Time: Within 30 seconds (T90)
  • Run Time: 25 hours Li-Ion Battery, 16 hours Alkaline after a 3 hours charge
  • Dimensions & Weight: 2.4” W x 2.63” H x 1.06” D (Approx. 61 W x 67 H x 27 D mm), 3.70 ounces (approx. 105 g) with rubber boot
  • Case Material: Explosion proof, dust and water resistant to IP-66/68 (2m,1h) approval, Drop height 23 ft
  • Controls: Two Buttons: Power/Mode, AIR
  • Data Logging: Logs user ID, station ID, Calibration & Bump Test History, Alarm interval trends
  • Standard Accessories: Alligator clip, protective rubber boot, charger, and calibration adapter

Our Price: $695.00
RKI GX-3R PRO 5 Gas Monitor RKI GX-3R PRO 5 Gas Monitor

RKI GX-3R PRO 5 Gas Monitor
With dimensions of 2.9" x 2.6" x 1.06" and weighing only 4.58 ounces, the GX-3R Pro is the smallest 5-gas detector on the market. The instrument can detect the standard confined space configuration of O2/LEL/CO/H2S as well as one toxic sensor. The meter can be clipped to a worker's breathing zone or used with the RP-3R to draw remote samples.
Features/Specifications:

  • Smallest & lightest 5-gas monitor (2.9" W x 2.6" H x 1.06" D, 4.58 ounces)
  • Simultaneous detection of up to 5 gases
  • Simple 2-button operation
  • Non-Compliance Indicator that flashes every 30 seconds (adjustable) when the detector has not been calibrated, bump tested, or if there's a gas alarm event.
  • Audible, visual, & vibration alarms with user-adjustable alarm levels
  • Datalogging
  • Impact resistant body with removable rubber boot
  • Large LCD Auto-backlit display
  • Li-Ion rechargeable battery with up to 25 hours of operation
  • Field replaceable sensors & filters
  • Water and dust resistant design, IP66/68
  • Stealth mode for law enforcement
  • Optional RP-3R sample pump
  • 3 Year warranty
  • Sampling Method: Diffusion sampling standard (hand aspirator or clip motorized pump optional)
  • Display: Full dot LCD with Autobacklight and autorotation
  • Alarm Types: Gas Alarms: Gas Alarm: STEL, TWA, Overscale, O2 decreasing / increasing, Man Down, Panic
    Trouble Alarm: Sensor disconnection, low battery, circuit error, calibration range error, cal or bump due alarm
Alarm Display:
  • Flashing LED’s
  • Continuous buzzer (100 db @ 30cm)
  • Flashing gas value
  • Vibration

Trouble Alarm:

  • Flashing LED's
  • Intermittent buzzer (95 db @ 30cm)
  • Display of error message
  • Operating Temperature & Humidity: -20°C ~ +50°C [ -4°F ~ +122°F ] 10 to 90% RH, non-condensing (continuous environment)
    -40°C ~ +60°C [ -40°F ~ +140°F ] 0 to 95% RH, non-condensing (temporary environment)
  • Response Time: Within 30 seconds (T90)
  • Power Source: 4-gas + EC: 25 hours Li-Ion, 16 hours Alkaline
    4-gas + IR: 16 hours Li-Ion, 7 hours Alkaline
  • Dimensions & Weight: 2.9” W x 2.6” H x 1.06” D (Approx. 73 W x 65 H x 26 D mm), 4.58oz (with rubber boot)
  • Case Material: Explosion proof, dust and water resistant to IP-66/68 (2m,1h) approval. Drop height 23 ft
  • Bluetooth Communication: BLE: with iOS and Android phone app: RK Link
  • Data Logging: Logs user ID, station ID, Calibration & Bump Test history, Alarm Events & Alarm Trends


Our Price: $1,060.00
IGLOO 384-451 400 Series Water Cooler 5 Gallons IGLOO 384-451 400 Series Water Cooler 5 Gallons

IGLOO 384-451 400 Series Water Cooler 5 Gallons
Specifications/Features:

  • Ultratherm® insulation for maximum cold retention and maintains ice for up to 3 days in temperatures as high as 90°F
  • HDPE hide won't chip, peel, buckle, or rust
  • UV stabilizers prevent fading, cracking in all exposures
  • Front push-button spigot is drip-resistant
  • White FDA Grade liner is easy-to-clean and resists stains and odors
  • Wide mouth pressure fit lid for easy filling
  • Keeper cord prevents lid loss
  • Color: Yellow/Red
  • Material: Plastic
  • Type: Insulated Water Cooler
  • Height: 20.38"
  • Length: 14-1/2"
  • Width: 13"

Our Price: $39.52
IGLOO 384-421 400 Series Water Cooler 2 Gallons IGLOO 384-421 400 Series Water Cooler 2 Gallons

IGLOO 384-421 400 Series Water Cooler 2 Gallons
Specifications/Features:

  • Ultratherm® insulation for maximum cold retention and maintains ice for up to 3 days in temperatures as high as 90°F
  • HDPE hide won't chip, peel, buckle, or rust
  • UV stabilizers prevent fading, cracking in all exposures
  • Front push-button spigot is drip-resistant
  • White FDA Grade liner is easy-to-clean and resists stains and odors
  • Wide mouth pressure fit lid for easy filling
  • Keeper cord prevents lid loss
  • Color: Yellow/Red
  • Material: Plastic
  • Type: Insulated Water Cooler
  • Height: 14-3/4"
  • Length: 11-1/2"
  • Width: 11.13"

Our Price: $29.32
GMP 33940 3/4" Pentagonal Penta Buster 804-5 GMP 33940 3/4" Pentagonal Penta Buster 804-5

GMP 33940 Pentagonal Penta Buster 3/4"
The Penta Buster tool is a patented, multi-purpose solution to the nagging industry problem of cleaning debris from the area surrounding the fasteners used in external ground-level service boxes. It grinds away the debris around service box enclosures with a ratchet that produces "teeth" that disappear at the flip of the wrist. Made with corrosion resistant 303 stainless steel.
The removable T-handle allows the base to be used with a standard 1/2" drive ratchet.

  • 3/4" Pentagonal Penta, 1/2" Ratchet
Applications:
  • Underground Electrical Utility
  • Underground Telecommunications
  • Underground Water valve
  • Underground Traffic/Street
  • Service box enclosures

Our Price: $171.43
GMP 33941 9/16" Hexagonal Penta Buster 804-7 GMP 33941 9/16" Hexagonal Penta Buster 804-7

GMP 33941 9/16" Hexagonal Penta Buster 804-7
The Penta Buster tool is a patented, multi-purpose solution to the nagging industry problem of cleaning debris from the area surrounding the fasteners used in external ground level service boxes. It grinds away the debris around service box enclosures with a ratchet that produces "teeth" that disappear at the flip of wrist. Made with corrosion resistant 303 stainless steel.
The removable T-handle allows the base to be used with a standard 1/2" drive ratchet.

  • 9/16" Hexagonal Penta, 1/2" Ratchet
Applications:
  • Underground Electrical Utility Boxes
  • Underground Telecommunications
  • Underground Water Valve
  • Underground Traffic/Street
  • Service Box Enclosure

Our Price: $171.43
GMP 33938 Adapter 3/8" - 1/2" Ratchet GMP 33938 Adapter 3/8" - 1/2" Ratchet

GMP 33938 Adapter 3/8" - 1/2" Ratchet
This unique tool is a patented, multi-purpose solution to the nagging industry problem of cleaning debris from the area surrounding the fasteners used in external ground service boxes. It grinds away the debris around service box enclosures with a ratchet that produces "teeth" that disappear at the flip of a wrist. Made with corrosion resistant 303 stainless steel.

Our Price: $13.93
ELK RIVER 25999 Two Leg Bridle with 30" Spreader Bar (YOKE) ELK RIVER 25999 Two Leg Bridle with 30" Spreader Bar (YOKE)

ELK RIVER 25999 Two Leg Bridle with 30" Spreader Bar (YOKE)

  • Materials: Nylon and Polyester webbing forged steel snap-hooks.
  • Type Use: Rescue, Confined Space, Industrial, Construction, General, Tower
  • Meets and/or exceeds current OSHA regulation
Features
  • Shoulder width separation for additional comfort
  • 3,600 lbs. gate snap-hooks
  • Used with Elk River's 05632 Manhole Retrieval System

Our Price: $47.91
ELK RIVER 42559 Universal Retrieval Harness, Medium - 2-XL ELK RIVER 42559 Universal Retrieval Harness, Medium - 2-XL

ELK RIVER 42559 Universal Retrieval Harness
Elk River's Universal Series Harness has the perfect fit for all your needs. The Universal full body harness combine the simplicity of easy functional design with the economy of one size fits many users. Designed to fit most workers in the range of 130-350 lbs. This versatile and useful universal fit harness features spring-loaded adjustment buckles
on the shoulder straps for easy adjustment and a comfortable custom fit.
Features:

  • Five D-rings: at back, hips, and shoulder
  • Fits Sizes Medium to 2-XL
  • Man rated to 400 lbs.
  • Mating buckle on chest strap
  • Tongue buckles on leg straps
  • Shoulder adjuster
  • Used with Elk River's 05632 Manhole Retrieval System


Our Price: $109.03
Condux 08761844 Pulling Eye, Inner-Duct 1.37" - 1.68" Condux 08761844 Pulling Eye, Inner-Duct 1.37" - 1.68"

Condux 08761844 Pulling Eye, Inner-Duct 1.37" - 1.68"
The Inner-duct Pulling Eye is a hybrid tool that combines features from standard inner-duct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the inner-duct as it is installed. It eliminates the need for a separate swivel on each pulling eye when installing single innerducts into individual conduits or multiple inner-ducts into a single conduit. Its short length is an advantage on tight bends compared to using a separate swivel and pulling eye. Easily installed using a 13⁄8" deep socket or adjustable wrench.
Specification:
ID Range: 1.37" - 1.68"
Max OD: 1.50"

Our Price: $95.04
Condux 08761846 Pulling Eye, Inner-Duct 2" Condux 08761846 Pulling Eye, Inner-Duct 2"

Condux 08761846 Pulling Eye, Inner-Duct 2"
The Inner-duct Pulling Eye is a hybrid tool that combines features from standard inner-duct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the inner-duct as it is installed. It eliminates the need for a separate swivel on each pulling eye when installing single innerducts into individual conduits or multiple inner-ducts into a single conduit. Its short length is an advantage on tight bends compared to using a separate swivel and pulling eye. Easily installed using a 13⁄8" deep socket or adjustable wrench.
Specification:
ID Range: 2"
Max OD: 2.50"

Our Price: $82.74
ARN 1-400440 Cable Adapter Insert for 1/2" cable ARN 1-400440 Cable Adapter Insert for 1/2" cable

ARN 1-400440 Cable Adapter Insert 1/2"
The cable adapter inserts are used in all current models of Arnco Air-Trak systems (400,402,402B, HD etc.) and are used to provide an air seal around the cable entering the air injector block from the tractor assembly. The inserts utilize u-cup and rope seals that have to be replaced periodically by the operator.
Cable Adapter Insert for 1/2" Cable
For cables ranging in sizes: 0.435" - 0.565"

Our Price: $720.00
ARN 1-400441 Cable Adapter Insert for 5/8" cable ARN 1-400441 Cable Adapter Insert for 5/8" cable

ARN 1-400441 Cable Adapter Insert 5/8"
The cable adapter inserts are used in all current models of Arnco Air-Trak systems (400,402,402B, HD etc.) and are used to provide an air seal around the cable entering the air injector block from the tractor assembly. The inserts utilize u-cup and rope seals that have to be replaced periodically by the operator.
Cable Adapter Insert for 5/8" cables
For cables ranging in sizes: 0.560" - 0.590"

Our Price: $725.00
ARN 1-400442 Cable Adapter Insert for 3/4" cable ARN 1-400442 Cable Adapter Insert for 3/4" cable

ARN 1-400442 Cable Adapter Insert 3/4"
The cable adapter inserts are used in all current models of Arnco Air-Trak systems (400,402,402B, HD etc.) and are used to provide an air seal around the cable entering the air injector block from the tractor assembly. The inserts utilize u-cup and rope seals that have to be replaced periodically by the operator.
Cable Adapter Insert for 3/4" cables
For cables ranging in sizes: 0.685" - 0.815"

Our Price: $725.00
ARN 1-400443 Cable Adapter Insert for 7/8" cable ARN 1-400443 Cable Adapter Insert for 7/8" cable

ARN 1-400443 Cable Adapter Insert 7/8"
The cable adapter inserts are used in all current models of Arnco Air-Trak systems (400,402,402B, HD etc.) and are used to provide an air seal around the cable entering the air injector block from the tractor assembly. The inserts utilize u-cup and rope seals that have to be replaced periodically by the operator.
Cable Adapter Insert for 7/8" cable
For cables ranging in sizes: 0.810" - 0.940"

Our Price: $725.00
ARN 1-400444 Cable Adapter Insert for 1" cable ARN 1-400444 Cable Adapter Insert for 1" cable

ARN 1-400444 Cable Adapter Insert 1"
The cable adapter inserts are used in all current models of Arnco Air-Trak systems (400,402,402B, HD etc.) and are used to provide an air seal around the cable entering the air injector block from the tractor assembly. The inserts utilize u-cup and rope seals that have to be replaced periodically by the operator.
Cable Adapter Insert for 1" cable
For cables ranging in sizes: 0.935" - 1.065"

Our Price: $725.00
Hubbell 630013 Anchor Tool, Kelly Bar Adapter, 2.0" Hex, 10,000' lbs. rating Hubbell 630013 Anchor Tool, Kelly Bar Adapter, 2.0" Hex, 10,000' lbs. rating

Hubbell 630013 Standard Kelly Bar Adapter 10,000 Ft Lbs (13,558 N-M) for 2" (50.8 mm) Hex Kelly Bar

  • Kelly Bar Adapter attaches to truck's torque motor drive shaft (Kelly Bar)
  • Locking Dog Assembly has six holes for 1/2" bolts on a 5-1/4" bolt circle comes with six 1/2" Grade 5 bolts, nut and lock washers
  • Painted with green paint
  • Bolt Grade: 5
  • Kelly Bar Shape: Hex
  • Number of Bolts Holes: 6
  • Torque Rating: 10,000' lbs
  • Type: Anchor/Pile Installation Tools
Dimensions:
  • Anchor Installation Hole Size: 0.5"
  • Diameter - Bolt: 0.5"
  • Diameter - Bolt Circle: 5.25"
  • Kelly Bar Adapter Inside Width: 2"
  • Kelly Bar Hole Distance to Flange: 5"
  • Length: 6.125"
  • Weight: 9.80 lbs.

Our Price: $463.56
Allegro 9401 Manhole Guard Rail Allegro 9401 Manhole Guard Rail

Designed to protect an area 33" x 33", this 42" high guard rail collapses to only 44" square x 4" for....

Our Price: $187.50
Allegro 9537-25 Manhole DC 8"  Blower Allegro 9537-25 8" Axial DC 12V Metal COM-PAX-IAL Blower w/ 25' Canister & Ducting

Manhole DC 8" Blower Com-PAX-ial With Canister All the same features of the AC model with CFM rate of 796 Free air. Blower with quick-connect 25' ducting canister. This attaches quickly without tools with Cam-lock latches. Both Blower and Canister come with handles.
Construction:

  • Complete unit epoxy powder coated orange
  • 15 gauge cold rolled steel housing with 18 gauge welded motor mount construction and 20 gauge steel canister
  • 25’ (7.62m) ducting and canister
  • Enclosed wide base for greater stability
  • Steel black powder coated plated grill
  • Carry handle made of 3-ply rubber belting
  • Equipped with four or five rubber feet
Motor:
  • HP: 1/4 HP, 12V DC
  • Max RPM: 3800 RPM
  • Current Draw: 22A
  • Fuse: Inline 30A
  • Cord: 15’ (4.57 m) 12/2 AWG SJTW 90C 300V medium duty, neoprene
  • Connector: Alligator clips
Fan:
  • Glass reinforced polypropylene (PPG) six blade fan
  • Aluminum hub
  • Moving fan mounted 1 5/8” (4.12 cm) from grill for safety
Ducting:
  • Retractable, non collapsible design, single-ply
  • PVC coated vinyl and polyester materials, temperature resistant up to 180°F (82.2°C)
  • Yellow color with black weather strip and integrated nylon attachment strap
  • Class 1 hard drawn spring steel wire helix that meets ASTM 227 specs
Blower Dimensions:
  • Length: 28" (71.1 cm)
  • Width: 11" (27.9 cm)
  • Height: 10" (25.4 cm)
  • Weight: 36 lbs.
Flow Rates:
  • Free Air CFM (m3 /hr): 796 (1352.41)
  • One 90° Bend CFM (m3 /hr): 667 (1133.24)
  • Two 90° Bends CFM (m3 /hr): 480 (815.52)





Our Price: $523.25
MANHOLE SHIELD, ALUMINUM, PELSUE 2730-8A MANHOLE SHIELD ALUMINUM PELSUE 2730-8A

Designed to protect an area 33" x 33", this 42" high guard rail collapses to only 44" square x 4" for....

Our Price: $331.25
Allegro Manhole Shield  Allegro 9401-12 Allegro Manhole Shield Allegro 9401-12

Manhole shields are constructed of rugged, lightweight Polyethylene with bright yellow material that....

Our Price: $151.31
Allegro 9500-01 8" Duct to Duct Connector Allegro 9500-01 8" Duct to Duct Connector

8" diameter Duct to Duct Connector Allows safe connection of additional ducting for....

Our Price: $25.50
Allegro 9500-25 Manhole Blower Ducting 8" x 25' Allegro 9500-25 Manhole Blower Ducting 8" x 25'

Lightweight and retractable, this ducting is designed for maximum air handling capabilities and....

Our Price: $129.00
Allegro 9506-25 Axial DC 12V 8" Metal Blower w/ 25' Canister & Ducting Allegro 9506-25 Axial DC 12V 8" Metal Blower w/ 25' Canister & Ducting

Allegro 9506-25 This manhole blower is a complete, all-in-one ventilation system includes an 8” axial blower powered by a 12 volt DC motor, and 25 feet of ducting and a built in storage canister. The handle and feet make this light weight system very portable and easy to store.
Construction:

  • Epoxy powder coated in “safety orange”
  • Flange on intake side for optional Inlet Adapter
  • 18 gauge cold rolled steel housing
  • Welded motor mount construction
  • Steel/chrome plated grill
  • Carry handle made of 3-ply rubber belting
  • Equipped with four rubber feet
Motor:
  • HP: 1/4 HP, 12V DC
  • RPM: 3800
  • Current Draw: 22A
  • Fuse: Inline 30A
  • Cord: 15’ (4.57 m) SJTW, AWG 12/2 90C 300V neoprene medium duty
  • Plug: Alligator clips
Fan:
  • Glass reinforced polypropylene (PPG) six blade fan with aluminum hub
  • Moving fan mounted 1 5/8” (4.12 cm) from grill for safety
  • Grill gap: 5/16” (0.79 cm)
Ducting:
  • Retractable, non-collapsible design
  • Single-ply, PVC coated, vinyl and polyester materials, temperature resistant up to 180°F (82.2°C)
  • Yellow color with black weather-strip and integrated nylon straps
  • Class 1 hard drawn spring steel wire helix that meets ASTM 227 specs
Blower Dimensions:
  • Length: 36" (91.4 cm)
  • Width: 13 5/8" (34.6 cm)
  • Height: 15" (38.1 cm)
  • Weight: 37 lbs.
Flow Rates:
  • Free Air (m3/hr): 1150 CFM (1953.86)
  • One 90° Bend (m3/hr): 800 CFM (1359.2)
  • Two 90° Bends (m3/hr): 650 CFM (1104.3)

Our Price: $517.50
Allegro 9514-25 Manhole AC 120V 8" Axial Blower w/ 25' Canister & Ducting Allegro 9514-25 Manhole AC 120V 8" Axial Blower w/ 25' Canister & Ducting

Engineered for convenience, this 8” axial blower is an all-in-one ventilation system. The design allows ducting to collapse into a built-in canister for easy storage. The unit can also be stored vertically to use a minimum amount of space. Includes blower, built-in storage canister and or 25 feet of ducting. Certified to CSA STD C22.2 No 113. Air delivery certified CEESI.
Construction:

  • Epoxy powder coated in “safety orange”
  • Flange on intake side for optional inlet adapter
  • 18 gauge cold rolled steel housing
  • 4 gauge steel enclosed panel to protect electrical components
  • Welded motor mount construction
  • Steel/chrome plated grill
  • Handle made of 3-ply rubber belting and equipped with 4 feet
Motor:
  • HP: 1/3 HP
  • Certifications: UL Recognized, CSA Certified
  • Voltage/Hz: 120V AC, 60Hz Single Phase
  • RPM: 3200
  • Current Draw: 3.0A
  • Cord: 6’ (1.82m) AWG 16/3 SJTW 105C 300V neoprene medium duty
  • Switch/Plug: Inline ON/OFF, integrated on cord, NEMA 5-15P 125V
Fan:
  • Glass reinforced polypropylene (PPG) six blade fan with aluminum hub
  • Moving fan mounted 1 5/8” (4.12cm) from grill for safety, 5/16” (.79cm) grill gap
Ducting:
  • Retractable, non-collapsible design
  • Single-ply, PVC coated, vinyl and polyester materials, temp. resistant up to 180°F (82.2°C)
  • Yellow color with black weather-strip and integrated nylon straps
  • Class 1 hard drawn spring steel wire helix that meets ASTM 227 specs
Blower Dimensions:
  • Length: 36" (91.4 cm)
  • Width: 13 5/8" (34.6 cm)
  • Height: 15" (38.1 cm)
  • Weight: 40 lbs.
Flow Rates:
  • Free Air CFM (m3 /hr): 1275 (2166.23)
  • One 90° Bend CFM (m3 /hr): 661 (1123.04)
  • Two 90° Bend CFM (m3 /hr): 582 (988.82)

Our Price: $517.50
Allegro 9533-25 8" Axial AC 120V Plastic Blower w/ Compact Canister & 25' Ducting Allegro 9533-25 8" Axial AC 120V Plastic Blower w/ Compact Canister & 25' Ducting

This manhole AC blower versatile system features the 8" COM-PAX-IAL blower with canister and 25' of ducting. This lightweight unit is designed with the quick-connect clipping system which allows workers to attach the canister, tools-free, to the input side for powerful extraction or output side for ventilation.
Construction:

  • New compact canister in 9533-25 model is the lightest and smallest in the industry!
  • Polyethylene housing and canister assembly
  • Lightweight, corrosion-, UV- and chemical-resistant
  • Super quiet, in “safety orange”
  • Bottom enclosure to protect electrical components
  • Carry handle molded into blower and canister housing
  • Steel powder coated grill
Motor:
  • HP: 1/3 HP
  • Certification: UL Recognized, CSA Certified, CE Certified
  • Voltage/Hz: 115V-230V AC, 50/60 Hz, Single Phase
  • RPM: 2800/3400
  • Switch: ON/OFF Rocker
  • Amps: 4.8A-2.4A (50 Hz) / 4.5A-2.2A (60 Hz)
  • Cord: 10’ (3.05 m) AWG
  • Plug: NEMA 5-15P
Fan:
  • Polypropylene nine blade fan
Ducting:
  • Retractable, non-collapsible design
  • Single-ply, PVC coated vinyl and polyester materials, temperature resistant up to 180° F (82.2° C)
  • Yellow color with black weather strip and integrated nylon attachment strap
  • Class 1 hard drawn spring steel wire helix that meets ASTM 227 specs
Blower Dimensions:
  • Length: 26" (66.0 cm)
  • Width: 13 1/2" (34.2 cm)
  • Height: 14 1/2" (36.8 cm)
  • Weight: 30 lbs.
Flow Rates:
  • Free Air CFM (m3/hr): 831 (1411.87)
  • One 90° Bend CFM (m3/hr): 709 (1204.59)
  • Two 90° Bends CFM (m3/hr): 586 (995.62)



Our Price: $284.05
Allegro 9535-08 Manhole AC Blower in a Bag Allegro 9535-08 Manhole AC 120V 8" Blower with 15' Ducting

Featuring an 8" metal blower system with ducting built into a heavy duty polyester bag for all-in-one unit for ease of operation. Designed with zippered ends that allow blower use without removing blower from the bag. Zipper openings allow for plug/cord inlet and outlet. Easy to carry and store. Polypropylene nine blade fan, steel/powder coated housing and grill, carry handle with molded-in 2 speed switch. Ducting: Single-Ply lightweight vinyl/polyester PVC coated. Yellow with black wear-strip and integrated nylon attachment strap on one end. Dimensions: 27"l x 15"w x 12"h
Construction:

  • Lightweight, metal 8” (20.3cm) blower
  • Super quiet
  • Carry handle with molded-in 2-speed switch
  • Steel/powder coated housing and grills
  • Unique bag with openings for plug/cord, inlet and outlet
  • Durable reinforced polyester bag
  • Easy to carry and store
  • All-in-one unit for ease of operation
  • Duct mounted on the blower and stored inside bag
  • Both carrying handle and shoulder strap allows for easy transportation
Motor:
  • HP: 1/4 HP
  • Certifications: UL Recognized, CSA Certified
  • Voltage/Hz: 115V AC, 60 Hz, Single Phase
  • Max RPM: 3300 (loaded at 120 Volts, 60 Hz)
  • Amps: 1.4A
  • Cord: 6’ (1.82m) AWG
  • Switch: 2-speed on/off switch
  • Plug: NEMA 5-15P 125V
Fan:
  • Polypropylene seven blade fan
Ducting:
  • Single-ply lightweight vinyl/polyester, PVC coated 180°F (82.2°C) temperature resistant
  • Non-collapsible retractable design
  • Yellow with black wear-strip and integrated nylon attachment strap on one end
Dimensions:
  • Length: 27" (68.5 cm)
  • Width: 15" (38.1 cm)
  • Height: 12" (30.4 cm)
  • Weight: 25 lbs.
Flow Rates:
  • 760 CFM (1291.2 m3 /hr)

Our Price: $304.75
Allegro 9535-12 AC 120V 12" Air Bag Blower with 15' Ducting Allegro 9535-12 AC 120V 12" Air Bag Blower with 15' Ducting

All in one unit for ease of operation. Featuring a 12" metal blower system with 15' duct built into a heavy duty polyester bag. Designed with zippered ends that allow blower use without removing blower from the bag. Zipper openings allow for plug/cord inlet and outlet. Easy to carry and store. Polypropylene nine blade fan, steel/powder coated housing and grill, carry handle with molded-in 2 speed switch. 60 Hz 3.8 Amps, 2 speed on/off switch. Ducting: Single-Ply lightweight vinyl/polyester PVC coated. Yellow with black wear-strip and integrated nylon attachment strap on one end. Dimensions: 28"l x 16"w x 14"h.
Construction:

  • Lightweight, metal 12” (30.4 cm) blower
  • Super quiet
  • Carry handle with molded-in 2-speed switch
  • Steel/powder coated housing and grills
  • Unique bag with openings for plug/cord, inlet and outlet
  • Durable reinforced polyester bag
  • Easy to carry and store
  • All-in-one unit for ease of operation
  • Duct mounted on the blower and stored inside bag
  • Both carrying handle and shoulder strap allow for easy transportation
Motor:
  • HP: 1/2 HP
  • Certifications: UL Recognized, CSA Certified
  • Voltage/Hz: 120V AC, 60 Hz, Single Phase
  • Amps: 3.8A
  • Max RPM: 3300 (Loaded at 120 Volts, 60 Hz)
  • Cord: 6’ (1.82m) AWG
  • Switch: 2-Speed on/off switch
  • Plug: NEMA 5-15P 125V
Fan:
  • Polypropylene seven blade fan
Ducting:
  • Single-Ply lightweight vinyl/polyester, PVC coated 180° F (82.2° C) temperature resistant
  • Non-collapsible retractable design
  • Yellow with black wear-strip and integrated nylon attachment strap on each end
Dimensions:
  • Length: 28" (71.1 cm)
  • Width: 16" 40.6 cm)
  • Height: 14" (35.5 cm)
  • Weight: 35 lbs.
Flow Rates:
  • 1840 CFM (3126.2 m3 /hr)



Our Price: $419.75
Allegro 9536-25 Manhole DC Blower Allegro 9536-25 8" Axial DC 12V Plastic Blower w/ 25' Canister & Ducting

This versatile system features the 8" COM-PAX-IAL DC plastic manhole blower with canister and 25' of ducting. This lightweight unit is designed with the quick-connect clipping system which allows workers to attach the canister, tools-free, to the input side for powerful extraction or output side for ventilation.
Construction:

  • New compact canister in 9536-15 and 9536-25 models is the lightest and smallest in the industry
  • "Safety Orange" Polyethylene housing and canister assembly
  • Lightweight, corrosion-, UV- and chemical-resistant
  • Super quiet
  • Bottom enclosure to protect electrical components
  • Carry handle molded in blower and canister housing
  • Steel powder coated grill
Motor:
  • HP: 1/4 HP
  • Voltage: 12V DC
  • Max RPM: 3800 RPM
  • Fuse: Inline 30A
  • Connection: 15' (4.75 m) Alligator Clips
  • Cord: SJTW, AGW 12/2 90C 300V neoprene medium duty
Fan:
  • Polypropylene six blade fan
Ducting:
  • Single-ply lightweight vinyl/polyester, PVC coated 180° F (82.2° C) temperature resistant
  • Non-Collapsible retractable design
  • Class 1 hard drawn spring steel wire helix, ASTM 227 Specs
  • Yellow with black wear-strip and integrated nylon attachment strap
Blower Dimensions:
  • Length: 26" ( 66.0 cm)
  • Width: 13 1/2" (34.2 cm)
  • Height: 14 1/2" (36.8 cm)
  • Weight: 30 lbs.
Flow Rates:
  • Free Air CFM (m3/hr): 816 (1386.39)
  • One 90° Bend CFM (m3/hr): 526 (893.67)
  • Two 90° Bends CFM (m3/hr): 442 (750.96)

Our Price: $332.35
Allegro 9401-10  Guard Rail Winch Allegro 9401-10 Guard Rail Winch

Allegro 9401-10  Guard Rail Winch.This Winch is lightweight, portable, and can be mounted very easily. Both sides are made out of a high density aluminum with a yellow coating to protect it from the elements. The drum, the line spins around is 3 inches thick and is made out of thick steel, making the reel in time much less. The retrieval line used in this system is 36 inches of 1/2 inch x 35 feet Dura-Plex braided rope, which is known for its strength and durability. It has a 300 lbs workload capacity. A 9/16"  snap hook (with safety snap design) that can attach to equipment or wrap back around to attach to itself when idle. (Do not use as personnel retrieval device) Allegro 9401 Guard Rail not included*

Our Price: $666.10
Allegro 9506-01 Axial DC 12V 8" Metal Blower w/ 25' Canister & Ducting Allegro 9506-01 Axial DC 12V 8" Metal Blower w/ 25' Canister & Ducting

This complete, all-in-one ventilation system includes an 8″ axial blower powered by a 12V DC motor, 15 or 25 feet of ducting and a built in storage canister. The handle and feet make this light weight system very portable and easy to store.
Construction:

  • Epoxy powder coated in “safety orange”
  • Flange on intake side for optional Inlet Adapter
  • 18 gauge cold rolled steel housing
  • Welded motor mount construction
  • Steel/chrome plated grill
  • Carry handle made of 3-ply rubber belting
  • Equipped with four rubber feet
Motor:
  • HP: 1/4 HP, 12V DC
  • RPM: 3800
  • Current Draw: 22A
  • Fuse: Inline 30A
  • Cord: 15’ (4.57 m) SJTW, AWG 12/2 90C 300V neoprene medium duty
  • Plug: Alligator clips
Fan:
  • Glass reinforced polypropylene (PPG) six blade fan with aluminum hub
  • Moving fan mounted 1 5/8” (4.12 cm) from grill for safety
  • Grill gap: 5/16” (0.79 cm)
Ducting:
  • Retractable, non-collapsible design
  • Single-ply, PVC coated, vinyl and polyester materials, temperature resistant up to 180°F (82.2°C)
  • Yellow color with black weather-strip and integrated nylon straps
  • Class 1 hard drawn spring steel wire helix that meets ASTM 227 specs
Blower Dimensions:
  • Length: 28" (71.1 cm)
  • Width: 13 5/8" (34.6 cm)
  • Height: 15" (38.1 cm)
  • Weight: 31 lbs.
Flow Rates:
  • Free Air (m3/hr): 1150 CFM (1953.86)
  • One 90° Bend (m3/hr): 800 CFM (1359.2)
  • Two 90° Bends (m3/hr): 650 CFM (1104.3)

Our Price: $494.50
   
 
1 2 3 ... 6