You are here: Home > Pole Line Hardware > 5G Antenna Mounts
We found 22 results matching your criteria.
Sort By:
1
Regular Square Nut 5/8" J8563 Regular Square Nut 5/8" J8563

Regular nuts are used on all types of threaded bolts and insulator pins. Considered safest to use by utility linemen. The J8563 regular square nut has a large wrenching surface.

Our Price: $0.25
Square Washer 2" x 2" x 1/8" J1074 Square Flat Washer 2" x 2" x 1/8" J1074

Square Washer, Galvanized 2" x 2" x 1/8" with 11/16" hole diameter and 5/8" bolt diameter

Our Price: $0.31
Square Washer 2 1/4" x 2 1/4" x 3/16" J1075 Square Flat Washer 2 1/4" x 2 1/4" x 3/16" J1075

Square Washer, Galvanized 2 1/4" x 2 1/4" x 3/16" with 11/16" hole diameter and 5/8" bolt diameter

Our Price: $0.46
Split Double Lock Washer 5/8" H-J177 Split Double Lock Washer 5/8" H-J177

Split Double Lock Washer 5/8" H-J177 Galvanized
Double Coil Washer.

Our Price: $0.54
Carriage Bolt 5/8" x 2-1/2" H-9360 Carriage Bolt 5/8" x 2-1/2" H-9360

  • Designed for use in square holes to keep the bolt from turning as the nut is tightened. Once bolt is inserted in square hole, bolt is tightened without gripping the bolt head.
  • Bolt head marking (ABI) appears on head of each bolt and is registered with the U.S. Patent Office per the Fastener Insignia Act.
  • Manufactured from Grade 2 Steel.
  • Hot dip galvanized to meet ASTM Specification A153.
  • Carriage Bolts are full threaded.
  • Minimum tensile strength: 13,550 lbf.
  • Recommended torque value: 73 ft lb.

Our Price: $0.79
Machine Bolt 5/8" x 6" J8806 BOLT Machine Bolt 5/8" x 6" J8806

Machine bolts 5/8 diameter and 6" length and longer also have cone points which permit driving without damage to threads. Machine bolts are roll threaded and have a square head and square nut.

Our Price: $1.41
Machine Bolt 5/8" x 12" J8812 BOLT Machine Bolt 5/8" x 12" J8812

Machine bolts 1/2 diameter and 7" length and longer also have cone points which permit driving without damage to threads. Machine bolts are roll threaded and have a square head and square nut.

Our Price: $1.70
Machine Bolt 5/8" x 14" J8814 BOLT Machine Bolt 5/8" x 14" J8814

Machine bolts 1/2 diameter and 7" length and longer also have cone points which permit driving without damage to threads. Machine bolts are roll threaded and have a square head and square nut.

Our Price: $1.89
Pole Gain Plate 5 1/4" x 4" J4060 Pole Gain Plate 5 1/4" x 4" J4060

Pole gains enhance the stability of the crossarm and pole interface.
They are used where it is not possible or desirable to cut a gain in the pole.
5 1/4" x 4"
Hot Dip Galvanized

Our Price: $3.57
Machine Bolt 5/8" x 24" J8824 BOLT Machine Bolt 5/8" x 24" J8824

Machine bolts 1/2 diameter and 7" length and longer also have cone points which permit driving without damage to threads. Machine bolts are roll threaded and have a square head and square nut.

Our Price: $3.60
Double Arming Bolt 5/8" x 26" J8876 BOLT Double Arming Bolt 5/8" x 26" J8876

Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. D.A. bolts are furnished with four square nuts.

Our Price: $5.00
Sidewalk Guy Clamp End J0522 Sidewalk Guy Clamp End J0522 Pipe size: 2" & 2-1/2" requires J931

These cast iron fittings are used with standard pipe near sidewalks and buildings where there is insufficient space for standard guying and where head clearance must be maintained.The J0522 end fitting requires a J931 guy clamp which must be ordered separately.

Our Price: $11.69
PERFECT FIT KIT J0522 GUY CLAMP - J1075 FLAT WASHER PERFECT FIT KIT J0522 GUY CLAMP - J1075 FLAT WASHER

J0522 cap uses two J-1075 washers for a perfect fit. The J0522 cast iron fittings are used with standard pipe. Square Washer J1075, Galvanized 2 1/4" x 2 1/4" x 3/16" with 11/16" hole diameter and 5/8" bolt diameter.

Our Price: $12.50
Antenna Mount 4.5" SPACER H-ANTENNA MNT Antenna Mount 4.5" SPACER H-ANTENNA MNT

Antenna Mount Spacer 4.5" Galvanized Spacer 1" x 4-1/2"

Our Price: $14.75
Braceless Crossarm Gain PX182 A Braceless Crossarm Gain PX182A Crossarm Range: 4-1/2 " TO 6"

Braceless crossarm gains improve the stability of the crossarm and eliminate the need for crossarm braces and pole gaining.The design improves the structure appearance and permits the use of fiberglass, wood, steel channel or steel tubular arms. Pole Mounting Slots 13/16 wide on top & 11/16 wide on Bottom Accommodates pole diameters from 6" - 12". Arm mounting slots are 9/16 inch wide by1-1/2 inch . Crossarm range: 4-1/2" - 6"

Our Price: $35.49
DOUBLE SPAN STEEL BRACE  60"H-J1510-ALL-8420 Double Span Steel Brace Cross-arm 60" H-J1510-ALL-8420

H-J1510-ALL-8420 Double Span Steel Brace 60" Span, 18" Drop
60" SPAN 18" DROP. One piece, angle steel, double span braces are used to support heavy crossarm construction. Braces are attached to the underside of the crossarm with 1/2" bolts or lag screws and fastened to the pole with a 5/8" bolt. The pole mounting section is designed to allow more than ample clearance for wrenching. Material: Hot Dip Galvanized.

Our Price: $47.09
Double Arm Mounting Bracket H-INW-DAMB-99Z3015. Double Arm Mounting Bracket H-INW-99Z3015-32 4x32x.3125

H-INW-99Z3015-32 4x32x.3125" DOUBLE ARM MOUNTING BRACKET
HOT DIP GALANIZED
SMALL CELL \ TOWER APPLICATION

Our Price: $50.64
Crossarm 8' H TD90 8 Crossarm 8' H TD90 8

Cross arm fastened at right angles to an upright (as the horizontal member of a cross or a traverse on a telephone pole. 3-1/2" x 4-1/2" x 8'

SUB H-BROOK8 FT CATV-96G

Our Price: $60.33
SIDEWALK GUY PIPE 2" RIGID Pipe size: 2" H-2.0x10  RIGID PIPE SIDEWALK GUY PIPE 2" RIGID Pipe size: 2" H-2.0 x 10' REPUBLIC

OUR 2" RIGID PIPE STICK IS 10 ft
ON 2 ENDS
USED FOR RISERS, SERVICE ENTRANCES, QUEENSPOST
10 ft weighs 37Lbs.
Material: Hot Dip Galvanized Pipe size: 2" rigid.
These cast iron fittings are used with standard pipe near sidewalks and buildings where there is insufficient space for standard guying and where head clearance must be maintained.

" Must Ship LTL Freight"

-Due to the 10 ft length, this must ship LTL Freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.

Our Price: $72.40
All-Threaded Galvanized Rod 5/8" X 12' PORT 13917 All-Threaded Galvanized Rod 5/8" X 12' PORT 13917

All Thread Rod 5/8 inches X 12 feet,hot dipped galvanized. ASTM A307 Grade B

All thread rod, commonly referred to as fully threaded rod, redi-rod, continuously threaded rod, TFL rod, and abbreviated ATR is used for general purpose fastening for anything from an anchor bolt to a through bolt. A variety of grades and materials are available.

Our Price: $129.96
5G-JOINT-POLE-V-SET-UP 5G JOINT POLE V SET-UP BUNDLE

DIMENSION VARY BASED UPON POLE /ANTENNA SIZE
5G Joint Pole V-Setup Bundle

Our Price: $910.83
5G-JOINT-POLE-SET-UP JOINT POLE SET-UP BUNDLE

DIMENSION VARY BASED UPON POLE /ANTENNA SIZE
5G Joint Pole Setup

Our Price: $923.13
   
 
1