Bashlin 1050-3-11 High Voltage Hot Glove Leather Protector
High Voltage Hot Glove Leather Protectors constructed from cowhide with a 3" cuff (12" OAL) , size 11.
For use with high voltage (10kV-40kV) rubber gloves.
Leave 1" of exposed rubber glove for every 10kV.
You must buy the rubber glove insert for these leather gloves, for protection from death or serious injury!!!!
See list below!!!
Hot Glove Setup Parts List:
- Hot Glove Cotton Liner- BASH 581
- Hot Glove Storage Bag- BASH 24L
- Rubber Hot Gloves BASH- 14-20B-11
- Leather Hot Gloves BASH- 1050-3-11
Bashlin 1050-5-10 High Voltage Hot Glove Leather Protector
High Voltage Hot Glove Leather Protectors constructed from cowhide with a 5" cuff (14" OAL), size 10
For use with high voltage (10kV-40kV) rubber gloves.
Leave 1" of exposed rubber glove for every 10kV.
You must buy the rubber glove insert for these leather gloves, for protection from death or serious injury!!!!
See list below!!!
Hot Glove Setup Parts List:
- Hot Glove Cotton Liner- BASH 581
- Hot Glove Storage Bag- BASH 24L
- Rubber Hot Gloves BASH- 16-20B-10
- Leather Hot Gloves BASH- 1050-5-10
Bashlin 1050-5-9 High Voltage Hot Glove Leather Protectors
High Voltage Hot Glove Leather Protectors constructed from cowhide with a 5" cuff (14" OAL), size 9.
For use with high voltage (10kV-40kV) rubber gloves.
Leave 1" of exposed rubber glove for every 10kV.
You must buy the rubber glove insert for these leather gloves, for protection from death or serious injury!!!!
See list below!!!
Hot Glove Setup Parts List:
- Hot Glove Cotton Liner- BASH 581
- Hot Glove Storage Bag- BASH 24L
- Rubber Hot Gloves BASH- 16-20B-09
- Leather Hot Gloves BASH- 1050-5-9
Bashlin 14-20B-11 Black Rubber Hot Gloves
Size 11, 14" black rubber hot gloves, rated maximum usage 17,000 voltage.
Leave 1" of exposed rubber glove for every 10kV.
Absolutely NO REFUNDS or EXCHANGES on hot glove items. This is for potential safety and liability issues. We apologize for the inconvenience.
Hot Glove Setup Parts List:
- Hot Glove Cotton Liner- BASH 581
- Hot Glove Storage Bag- BASH 24L
- Rubber Hot Gloves BASH- 14-20B-11
- Leather Hot Gloves BASH- 1050-3-11
How long does the user have to put new gloves into service?
The user has 12 months from the test date to put new gloves into service. New (gloves that have never been issued for use) may be retested and the user has 12 months from that date to put them into service.
When should rubber insulating gloves be retested?
There are two standards that prescribe test intervals: • OSHA 1910.137 – Must be electrically tested before first issue and every six months thereafter • OSHA 1910.268 (Tele-com) – Natural rubber insulating gloves must be electrically tested before first issue, twelve months after first issue and every 9 months thereafter • Any un-issued glove that has not been tested within twelve months must be re-tested before issue.
Bashlin 16-20B-010 Black Rubber Hot Gloves
Size 10, 16" black rubber hot gloves, rated maximum usage 17,000 voltage.
Leave 1" of exposed rubber glove for every 10kV.
Absolutely NO REFUNDS or EXCHANGES on hot glove items. This is for potential safety and liability issues. We apologize for the inconvenience.
Hot Glove Setup Parts List:
- Hot Glove Cotton Liner- BASH 581
- Hot Glove Storage Bag- BASH 24L
- Rubber Hot Gloves BASH- 16-20B-10
- Leather Hot Gloves BASH- 1050-5-10
How long does the user have to put new gloves into service?
The user has 12 months from the test date to put new gloves into service. New (gloves that have never been issued for use) may be retested and the user has 12 months from that date to put them into service.
When should rubber insulating gloves be retested?
There are two standards that prescribe test intervals: • OSHA 1910.137 – Must be electrically tested before first issue and every six months thereafter • OSHA 1910.268 (Tele-com) – Natural rubber insulating gloves must be electrically tested before first issue, twelve months after first issue and every 9 months thereafter • Any un-issued glove that has not been tested within twelve months must be re-tested before issue.
Bashlin 16-20B-09 Black Rubber Hot Gloves
Size 9, 16" black rubber hot gloves, rated maximum usage 17,000 voltage.
Leave 1" of exposed rubber glove for every 10kV.
Absolutely NO REFUNDS or EXCHANGES on hot glove items. This is for potential safety and liability issues. We apologize for the inconvenience.
Hot Glove Setup Parts List:
- Hot Glove Cotton Liner- BASH 581
- Hot Glove Storage Bag- BASH 24L
- Rubber Hot Gloves BASH- 16-20B-09
- Leather Hot Gloves BASH- 1050-5-9
How long does the user have to put new gloves into service?
The user has 12 months from the test date to put new gloves into service. New (gloves that have never been issued for use) may be retested and
the user has 12 months from that date to put them into service.
When should rubber insulating gloves be retested?
There are two standards that prescribe test intervals:
• OSHA 1910.137 – Must be electrically tested before first issue and every six months thereafter
• OSHA 1910.268 (Tele-com) – Natural rubber insulating gloves must be electrically tested before first issue, twelve months after first
issue and every 9 months thereafter
• Any un-issued glove that has not been tested within twelve months must be re-tested before issue.
Bashlin 24L Hot Glove Storage Bag
Hot glove storage bag made of canvas for 16" gloves. Bashlin’s glove bags are made of heavy-duty cotton duck, double sewn. They have ventilation and drain holes in the bottom. Button snap closures and an attachment hook are standard.
Hot Glove Setup Parts List:
- Hot Glove Cotton Liner- BASH 581
- Hot Glove Storage Bag- BASH 24L
- Rubber Hot Gloves BASH- 16-20B
- Leather Hot Gloves BASH- 1050-5
Bashlin 581 Standard Hot Glove Cotton Liner
Standard Hot Glove cotton liner. Constructed from cotton with a 10" OAL.
One size fits all, machine washable.
SOLD AS A PAIR
Hot Glove Setup Parts List:
- Hot Glove Cotton Liner- BASH 581
- Hot Glove Storage Bag- BASH 24L
- Rubber Hot Gloves BASH- 16-20B
- Leather Hot Gloves BASH- 1050-5
Bashlin 76PAT Patriot Wood Pole Fall Restraint Device, 6" - 20" Dia.
Bashlin 76PAT Patriot Wood Pole Fall Restraint Device 6" - 20"
The Patriot is here to free you from the tyranny and restrictions of other WPFRD's
- It is lightweight, at least 20% lighter than competitive product
- Ergonomic approved design reduces upper body strength
- Allows proper body position and leg placement when climbing
- 76PAT, 6" - 20" Pole Diameter
Bashlin 76PAT-T Patriot Wood Pole Fall Restriction Device - Transmission Model 6" - 30" Dia.
Bashlin 76PAT-T Patriot Wood Pole Fall Restriction Device - Transmission Model 6" - 30" Dia.
The Patriot is here to free you from the tyranny and restrictions of other WPFRD's.
- It is lightweight, at least 20% lighter than competitive product
- Ergonomics approved design reduces upper body strength
- Allows proper body position and leg placement when climbing a pole
- 76PAT-T, 6" - 20" Pole Diameter
Bashlin 88X4DMP D22 Labrador "Liberty" Linemen's Tool Belt
Bashlin's newest belt hugs the hips and has extra D-rings for carrying a secondary lanyard. The upper D's are positioned in just the right place. The arc resistant cushion promotes cooling and ventilation. It is soft, and requires no break-in.
Bahlin 88X4DMP: 4 D-Ring Tool Belt
- 4 D-Ring Belt
- The freedom of a single tongue
- Full floating D-saddle
- Durable 7" back
- Features a moisture wicking nylon mesh cushion
Bashlin Fall Line Rope Grab System BASH-BLF52-50
Bashlin Fall Line Rope Grab System BASH-BLF52-50
Constructed from durable stainless steel.
Designed for use on 5/8" twisted rope & a maximum lanyard length of 3'.
Moves easily up & down the line.
Features a 3" d-ring for lanyard attachment.
Includes:
3 ft Shock absorbing Lanyard
Rope Grab
Carry Bag
3" D-RingBashlin's 2000 Series Lanyards are for fall arrest applications. They feature forged hardware and meet the ANSI and OSHA requirements.
Bashlin Fall Line Robe Grab System BASH-BLF52-50
Body Harness Bashlin 662-RD
"H" Harness with 3" D-Ring attachmant - Fixed Chest StrapOne Size Fits Most. The 3" D-ring can be used with....
Buckingham 9-8 ADJUSTABLE WEB LANYARD 8FT
Buckingham 9-8 BuckAdjuster
To be used with the BuckSqueeze Wood Pole Fall Protection System. BuckAdjuster 8' rope lanyard with the BuckGrab 5004B LAD [Length Adjusting Device] with a 90 degree twist in the eye of the CAM. Gives the user the ability to easily adjust the length of the lanyard with one hand. Lanyard is stitched 1/2" rope with a green and white jacket and red core.
Buckingham EZ Squeeze 490W2 Fall Protection W/WEB GRAB ADJUSTER
Buckingham EZ Squeeze 490W2 Fall Protection W/WEB GRAB ADJUSTER
DESCRIPTION:
EZ SQUEEZE™ WITH WOVEN INNER STRAP FOR DISTRIBUTION – 490W2
The New Lightweight Design EZ Squeeze™ offers superb Wood Pole Fall Restriction capabilities and easy one handed outer strap adjustment through use of Buckingham’s patent pending WebGrab™ with the New BuckHorn Adjustment Lever. This new component allows EZ length adjustment of the outer strap, without the need for the user to remove their weight from the device. With just a flick of the wrist user’s can adjust the strap in and just tapping the BuckHorn™ to adjust out.
Buckingham LIGHT WEIGHT FULL FLOAT BODY BELT 20193M-D23-D30
This belt is wrapped in quality ultra-soft leather for that instant “broke in” feel and flexibility right out of the box. Your back will thank you for the fully padded 9″ high back. The stacked 4 Dee ring design is a Buckingham original design that lends itself perfectly to wood pole fall restriction devices like the Industry standard SuperSqueeze™
Buckingham LIGHT WEIGHT FULL FLOAT BODY BELT 20193M-D36
This belt is wrapped in quality ultra-soft leather for that instant “broke in” feel and flexibility right out of the box. Your back will thank you for the fully padded 9″ high back. The stacked 4 Dee ring design is a Buckingham original design that lends itself perfectly to wood pole fall restriction devices like the Industry standard SuperSqueeze™
Buckingham Mobility Belt 20192M
The “Mobility" belt is a unique design from Buckingham. The belt is secured to the waist with a single man-rated gut-strap and the lower belt and buckle have been eliminated. The lack of a lower belt buckle allows greater freedom of movement without interference with your legs while climbing. The main lower d-rings are a full floating design for easy positioning. The upper stacked d-rings are designed for climbing with a BuckSqueeze, SuperSqueeze, or other fall protection devices. The Drilex synthetic padding wicks moisture away from your body, and provides day-long comfort. Weight: 7 lbs.
Buckingham Supersqueeze 488R COMP W/ROPE DIST
The lightweight design of the SuperSqueeze offers superb Wood Pole Fall Restriction and offers easy one handed outer strap adjustment by incorporating Buckingham's WebGrab which allows adjustment with just a flick of the wrist. Weighs 4.5 lbs. Measures 36" distribution outer strap and 70" rope inner strap with carabiners. Meets ASTM F887-11.
Rope Squeeze
Buckingham Supersqueeze 488RQ4 Fall Protection W/ SNAPHOOK
488RQ4 - SuperSqueeze™
Connector: Snap Hook Outer Strap Length: 36" Inner Material: Rope Inner Material Length: 70"
• Easy One Handed Outer Strap Adjustment with the New Buck WebGrab™
- Same Easy One Handed Adjustment on the Inner Strap with the BuckGrab™
• Modular Design for Easy Strap Change Out
- Can Easily Change Out Worn or Damaged Components or Straps in the Field
- Can Easily Be Configured to Use A Rope or Web Strap
• One Disconnect to Climb Over An Obstruction
• Can be Used by Right or Left Handed Users
• Outstanding Factory Support - Follow Up Training After The Sale
• Lightweight Design
• 36" Distribution Outer Strap, 70" Rope Inner Strap with Snap Hooks
• For Use in Climbing Up to a Class 1 65' Pole/50" Circumference
• Meets ASTM F887-11
• All Straps Have Red Warning Center
• 3600 lb. Gate Rated Hardware
• Rated to 350 lbs.
Buckingham Supersqueeze 488W2 Fall Protection
The SuperSqueeze offers superb Wood Pole Fall Restriction and offers the easiest adjustment on the market. With Buckingham patent pending WebGrab the SuperSqueeze can be adjusted with just a flick of the wrist. The SuperSqueeze can be configured to fit many climbing styles and needs, and it's modular design makes it easy change out warn or damaged components or strap in the field. Rated to 310 lbs.
Buckingham VINYL NUT AND BOLT BAG – 4570G9
The Buck Nut and Bolt Bag is made from quality heavy vinyl. Designed for easy excess to small hardware while in or off the field. The Buck Nut and Bolt bag is lightweight and easy to attach and detach from body belts or any other form of carry with our snap and Dee ring connection.
Canvas Tool Bag Bashlin 12S
This bag is available in canvas or coated polyester. Designed to carry the essential items used by a lineman. It has a...
Leather Climber Pads Bashlin 140DS
The Bashlin 140 series pads will hold the shank securely and at a slight angle for better control. It has a soft leather inside and....
Lineman climbers Bashlin BD14-5N
The BD14 is Bashlin's aluminum alloy offset climber with a replaceable, forged steel gaff. This lightweight climber reduces fatigue and adds climbing comfort. Comparable steel climbers weigh 30% more. The aluminum alloy construction sacrifices some wearing qualities.
Lineman Gaff Gauge BASH-5
- For use w/ Bashlin climbers only. Use the gaff guage to maintain the correct shape, taper, & profile of your gaffs.
- Instructions included.
Lineman Gaff Guards Bashlin 2
Bashlin 2 Gaff Guard
- Constructed from the highest quality Russet leather with a hook and loop attachment
- Helps keep the gaff sharp and protects the user from scratches and punctures wounds.
- Not only reduces damage to the user but also to the gaff.
- Sold in pairs
Lineman Tool Belt Bashlin 1511N-D21-D28
The Wrangler 1511N has a 5" cushion section, a neoprene nylon back, and a 6 ply tongue and buckle section. It is lightweight with two fixed S-shaped "D" rings for gut strap attachment, tape sling, knife snap, glove bag ring and hammer loop on left.
D-Size: 21-28, To obtain the correct D-to-D (D-ring to D-ring) size, measure around the back from hipbone to hipbone
and then add 2".
Lineman Tool Belt Bashlin 1511N-D20
Lineman Tool Belt Bashlin 1511N-D30-D32
The Wrangler 1511N has a 5" cushion section, a neoprene nylon back, and a 6 ply tongue and buckle section. It is lightweight with two fixed S-shaped "D" rings for gut strap attachment, tape sling, knife snap, glove bag ring and hammer loop on left. To obtain the correct D-to-D (D-ring to D-ring) size, measure around the back from hipbone to hipbone and then add 2".
BASH-1511N-D30-D32
Lineman Tool Belt Bashlin 88-D21
The Floridian 88-D21 has a Superior design and performance make this belt the industry standard. It combines a
padded, contour cushion section with flares for the two shifting D-rings and 5 1/2" back. This belt gives excellent support and climbing comfort.
Size:36-44, to obtain the correct D-to-D (D-ring to D-ring) size, measure around the back from hipbone
to hipbone and then add 2" (51 mm).
Lineman Tool Belt Bashlin 88-D22
The Floridian 88-D22 has a Superior design and performance make this belt the industry standard. It combines a
padded, contour cushion section with flares for the two shifting D-rings and 5 1/2" back. This belt gives excellent
support and climbing comfort.
Size:37-45, To obtain the correct D-to-D (D-ring to D-ring) size, measure around the back from hipbone
to hipbone and then add 2" (51 mm).
Lineman Tool Belt Bashlin 88-D23
The Floridian 88-D23 has a Superior design and performance make this belt the industry standard. It combines a
padded, contour cushion section with flares for the two shifting D-rings and 5 1/2" back. This belt gives excellent
support and climbing comfort.
Size:38-46, To obtain the correct D-to-D (D-ring to D-ring) size, measure around the back from hipbone
to hipbone and then add 2" (51 mm).
Lineman Tool Belt Bashlin 88-D24
The Floridian 88-D24 has a Superior design and performance make this belt the industry standard. It combines a
padded, contour cushion section with flares for the two shifting D-rings and 5 1/2" back. This belt gives excellent
support and climbing comfort.
Size:40-58, To obtain the correct D-to-D (D-ring to D-ring) size, measure around the back from hipbone
to hipbone and then add 2" (51 mm).
Lineman Tool Belt Bashlin 88-D25
The Floridian 88-D25 has a Superior design and performance make this belt the industry standard. It combines a
padded, contour cushion section with flares for the two shifting D-rings and 5 1/2" back. This belt gives excellent
support and climbing comfort.
Size:41-49, to obtain the correct D-to-D (D-ring to D-ring) size, measure around the back from hipbone
to hipbone and then add 2" (51 mm).
Lineman Tool Belt Bashlin 88-D26
The Floridian 88-D26 has a Superior design and performance make this belt the industry standard. It combines a padded, contour cushion section with flares for the two shifting D-rings and 5 1/2" back. This belt gives excellent
support and climbing comfort.
Size:42-50, to obtain the correct D-to-D (D-ring to D-ring) size, measure around the back from hipbone
to hipbone and then add 2" (51 mm).
Lineman Tool Belt Bashlin 88-D28
The Floridian 88-D28 has a Superior design and performance make this belt the industry standard. It combines a
padded, contour cushion section with flares for the two shifting D-rings and 5 1/2" back. This belt gives excellent
support and climbing comfort.
Size:42-50, to obtain the correct D-to-D (D-ring to D-ring) size, measure around the back from hipbone
to hipbone and then add 2" (51 mm).
Lineman Tool Belt Suspenders
Constructed from the highest quality 3/4" russet leather
Fully adjustable design (one size fits most)
Secures to a belt w/ cast snap hooks
THIS IS NOT A SAFETY BELT
Lineman Tool Board Bashlin 708
Bashlin's tool boards are made of ABS. This light, durable material does not fray or flake and has superior cold weather....
Lineman Wrench 12" Lowell 103TDE
Dual End Lineman Wrench 12" Lowell 103TDE
Triple Dual End Ratcheting Lineman Wrench.
Lineman's Wrenches for high line utility pole installation and repair.
Lineman Wrench 12" Lowell 151T
The Bolt-Thru design allows threaded rod to pass thru the socket so that nuts can be secured on any threaded length. 3/4" x 1" x 1-1/8" squares....
Lineman Wrench 15" Lowell 104T
The Bolt-Thru design allows threaded rod to pass thru the socket so that nuts can be secured on any threaded length. 3/4" x 1" x 1-1/8" squares....
Lineman Wrench 8.25" Lowell 101T
The Bolt-Thru design allows threaded rod to pass thru the socket so that nuts can be secured on any threaded length. 3/4" x 1" x 1-1/8" squares....
