Box of 100ea.
3M Scotchlok Insulation Displacement Connector (RED) 19-26AWG
The UR connector accepts two or three solid copper conductors for butt splicing. The connector is filled with a sealant to provide moisture resistance. RUS Listed.

Automatically limits desired torque. Torque by feel. Pull and clickit's torqued to micrometer accuracy...

Hinged metal box with one stand-up bit holder. General-purpose, high-speed bits for....

Standard length for most applications. Fits over long bolts and studs. Full hollow shafts facilitate...

Nut Driver 5/16" Cushion-Grip Klein 630 Exclusive hollow shaft design with Rare Earth magnetic tip...

The 6-in. Long-Nose, Side-Cutting Pliers are made of the finest U.S. steel alloy. They are forged, precision machined, hardened and carefully tempered for maximum strength and faultless performance. The long nose pliers with side cutters have knives that meet at the hinge first and then meet at least one-half of the knife length. This precise knife-closing design increases knife life and facilitates resharpening. Pliers are individually adjusted to meet performance standards far exceeding application requirements.

These Long-Nose Side-Cutting Pliers are made of custom, US-made
tool steel that features induction hardened, long-lasting cutting
knives. The knurled jaws provide sure wrapping and looping.

Crimps and seats Scotchlok UG, UR, and UY connectors. Hot-riveted joint for smooth action and no handle wobble. Curved handles for greater control. Induction hardened side-cutting knives for long life. Spring-loaded action for self-opening.

Designed to handle most cable installation applications cutting up to 3/4-Inch aluminum and copper coaxial cable. Cutting Capacity: 0.75'' (1.9 cm)

Klein 702-12 High-Tension hacksaw are designed for the professional, providing superior results with less effort. This Hacksaw features a curved front end and cushioned handles for easy cutting.
Specifications:

• Adjustable blade tension up to 30,000 PSI for fast, precise cutting
• includes 12" (305mm) X 24 TPI bi-metal hacksaw blade and 6" (152mm) X 24 TPI bi-metal reciprocating saw blade
• Alternative 45 degree mounting for flush cutting
• Convenient blade storage in handle

The Klein 248-08 Diagonal-Cutters have a high-leverage design for 36% more cutting power than other pliers. Jaw Capacity: 0.75'' (1.9 cm)

Quickly and easily pulls 1/8'' (3 mm) or 1/4'' (6 mm) flat steel fish tape without damaging the tape. High-leverage design. Rivet is closer to the cutting edge for 46% greater cutting and gripping power than other plier designs. Induction hardened cutting knives for long life. Hot-riveted joint ensures smooth action and no handle wobble. Streamlined design with sure-gripping, cross-hatched knurled jaws.

Knockout Punch Set with Wrench Klein 53732SEN

Cleanly strips 12 AWG solid wire. Heavier design for greater cutting power. Extended handles provide added reach and leverage. Slim head design for working in confined areas. Induction hardened cutting knives for long life.

Klein Tools CL800 is an automatically ranging true root mean squared (TRMS) digital clamp-meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features.

Hole Saw Kit BIMETAL Klein 31902

9" High-Leverage Lineman's Bolt-Threading
Holding Hinge opening holds and cleans 5/8" pole line and hardware and bolts or threaded rods

.

Klein Golden Tri-Cut Blades (10 pack) Unique design provides three teeth sizes on one blade. Has....

Shear-type cutter for precision wire cutting. Two versatile jaw positions. Serrated jaws provide sure-gripping power. Nickel-chrome plated for long life.

Woven fiberglass tape with moisture-proof coating of polyvinyl chloride assures durability and protects against oil or chemicals. Tape ring tucks neatly into case opening for storage.

Heavy-duty, double-duty hammer drives lags and pulls big nails. Special high-carbon steel....

Designed for pole-line work. Rugged and well-balanced, with the weight to drive lag bolts. Forged, tempered-steel head is only 3-3/4'' (95 mm) long for use in tight areas. Identical faces with 1-3/4'' (44 mm) round-crown driving surface and beveled edges.

Simply dial desired wire size for fast, easy stripping. Adjustable tool makes short work of cutting and....

A heavy, strong, multi-purpose tool that saves time and effort on the job.
The 3" (76 mm) width protects concrete when stripping forms.
Efficient blade angle and 55-1/2" (141 cm) total length provide high leverage as a crow bar and nail and spike puller.
Blade is forged and hardened alloy with keyhole nail-pulling slot in center and V-notch in tapered edge.
Very efficient nail-pulling tool even in awkward positions.
Can also be used to help align walls during tilt-up construction, to roll and align large pipe, to remove shingles and flooring, and for many other stripping and prying tasks.

General-purpose selection of the most frequently used nut drivers. Full hollow shaft (except 3/16'') designed with....

High-leverage design for exceptional cutting capability of 4/0 aluminum, 2/0 soft copper, 100-pair 24 AWG communications cable, Jaw Capacity: 1.06" (2.7 cm)

Lightweight die-cast aluminum construction. The traditional Benfield head design accurately....

• Stainless steel is corrosion resistant to extend the life of the tool; Updated model Cat. No. 56341 available
• High strength spring steel fish tapes are stiff for long runs and are great for heavy duty wire pulls
• Laser etched markings in 1-foot (0.3 m) increments allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out

Permanent, laser etched 1' increments on the tape allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out.

• Fish tapes are 1/8-Inch wide high strength spring steel which are stiff for long runs and great for heavy duty wire pulls
• Laser etched markings in 1-foot (0.3 m) increments allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out

The Klein Tools 50' (15.24m) steel fish tape is perfect for short wire runs associated with light commercial, residential, and voice-data-video-audio installations.

Sized: 1/16" through 1/2" by 64ths. Hinged metal box with two stand-up bit holders. General-purpose....

Sized: 1/16" through 1/2" by 32nds. Hinged metal box with two stand-up bit holders....

Quickly installs and removes spring-tension hose clamps. Grips with either end or side of jaws for work in confined areas. Nickel-chrome plated for long life.

• Durable, high strength 1/8-Inch wide stainless steel fish tapes are firm yet flexible for long runs and large wire pulls
• Corrosion resistant stainless steel tape extends the life of the tool
• Case design decreases payout effort and friction by optimizing the tape payout angle

The Klein Tools 7-Piece Magnetic Nut Driver Set features nut drivers with internal flanges to provide a solid, twist-resistant shaft anchor. The nut drivers are made with chrome-plated, hollow shafts to help prevent corrosion.

The Klein Tools 7-Piece Magnetic Nut Driver Set features nut drivers with internal flanges to provide a solid, twist-resistant shaft anchor. The nut drivers are made with chrome-plated, hollow shafts to help prevent corrosion.

High-leverage design for exceptional cutting capability of 4/0 aluminum, 2/0 soft copper, 100-pair 24 AWG communications cable, Jaw Capacity: 1.06" (2.7 cm)

• Fish tapes are 1/8-Inch wide high strength spring steel which are stiff for long runs and great for heavy duty wire pulls; Updated Model Cat. No. 56334 available
• Laser etched markings in 1-foot (0.3 m) increments allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out