You are here: Home > Underground Hardware > Innerduct Couplers
We found 81 results matching your criteria.
E-Split Couplers Microduct Couplers & Endcaps
Pushlock Couplers Reverse Thread Couplers
Innerduct Couplers
Sort By:
1 2
ALUMINUM REVERSE THREADED COUPLER US COUPLER AR1.315 1" ALUMINUM REVERSE THREADED COUPLER US COUPLER AR1.315

SIZE: 1" sdr11
NOMINAL DUCT: 1.315

This line of couplers is machined with right hand - left hand threads which draw both sides of the innerduct into the coupler at a smooth relative rate. Each coupler is precision machined with a wide, eight pitch thread enabling quicker installation. These couplers are installed by hand and do not require any type of installation tool. These couplers are available in size from 3/4" to 3".

Our Price: $5.04
ALUMINUM REVERSE THREADED COUPLER US COUPLER AR1.900 1-1/2" ALUMINUM REVERSE THREADED COUPLER US COUPLER AR1.900

SIZE: 1-1/2"
NOMINAL DUCT: 1.900

This line of couplers is machined with right hand - left hand threads which draw both sides of the innerduct into the coupler at a smooth relative rate. Each coupler is precision machined with a wide, eight pitch thread enabling quicker installation. These couplers are installed by hand and do not require any type of installation tool. These couplers are available in size from 3/4" to 3".

Our Price: $6.15
ALUMINUM REVERSE THREADED COUPLER US COUPLER AR1.660 1-1/4" ALUMINUM REVERSE THREADED COUPLER US COUPLER AR1.660

SIZE: 1-1/4"
NOMINAL DUCT: 1.660

This line of couplers is machined with right hand - left hand threads which draw both sides of the innerduct into the coupler at a smooth relative rate. Each coupler is precision machined with a wide, eight pitch thread enabling quicker installation. These couplers are installed by hand and do not require any type of installation tool. These couplers are available in size from 3/4" to 3".

Our Price: $5.26
2" ALUMINUM REVERSE THREADED COUPLER US COUPLER AS2.375 2" ALUMINUM REVERSE THREADED COUPLER US COUPLER AS2.375

SIZE: 2" sdr11
NOMINAL DUCT: 2.375

This line of couplers is machined with right hand - left hand threads which draw both sides of the innerduct into the coupler at a smooth relative rate. Each coupler is precision machined with a wide, eight pitch thread enabling quicker installation. These couplers are installed by hand and do not require any type of installation tool. These couplers are available in size from 3/4" to 3".

Our Price: $6.70
Aluminum Airtight Couplings CABTEC-ASB1.194 TRUE SIDR11 Aluminum Airtight Couplings CABTEC-ASB1.194 TRUE SIDR11

O.D 1.194 This series of aluminum airtight couplings incorporates the same reliable,

full circumference seal used in our barbed ring compression couplings.

But unlike other one piece plastic or aluminum compression couplings

that have to be installed with some type coupling press,

these reverse threaded barbed ring couplings can be installed

like any ordinary reverse thread coupling. Instead of a coupling press,

a special wide pitch, fast traveling thread is used to force the innnerduct

over barbed ring seal. Sold individually.

Our Price: $6.60
B&C BC02-154R SIDR9 1-1/4" Black Plastic Reverse Thread Coupler B&C BC02-154R SIDR9 1-1/4" Black Plastic Reverse Thread Coupler

B&C BC02-154R TRUE SIDR9 1-1/4" Black Plastic Reverse Thread Coupler

  • Fits Verizon 1-1/4" TRUE SIDR 9
  • Color: Black
  • Material: Plastic

Our Price: $5.05
Cable-Tec ASB1.488 TRUESIDR11.5 Airtight Aluminum Coupling, Reversed Thread Barbed Cable-Tec ASB1.488 TRUE SIDR11.5 Airtight Aluminum Coupling, Reversed Thread Barbed

Cable-Tec ASB1.488 TRUESIDR11.5 Airtight Aluminum Coupling, Reversed Thread Barbed
This series of aluminum airtight couplings incorporates the same reliable, full circumference seal used in our barbed ring compression couplings. But unlike other one piece plastic or aluminum compression couplings that have to be installed with some type coupling press, These reverse threaded barbed ring couplings can be installed like any ordinary reverse thread coupling. Instead of a coupling press, a special wide pitch, fast traveling thread is used to force the innnerduct over barbed ring seal. Sold individually.
SDR Duct Outer Diameter: 1.488

Our Price: $5.15
Comfit Coupler 1 1/2" Condux 08566115 Comfit Coupler 1 1/2" Condux 08566115 Push lock

Comfit Push Fit Push Lock is a unique Hi-Tech coupler for HDPE cable ducts. Leak tested at 230 PSI and resistant to corrosion and most...

Our Price: $7.85
Comfit Coupler 1 1/4" Condux 08566112 Comfit Coupler 1 1/4" Condux 08566112 Push lock

Comfit Push Fit Push Lock is a unique Hi-Tech coupler for HDPE cable ducts. Leak tested at 230 PSI and resistant to corrosion and most...

Our Price: $6.23
Comfit Coupler 1" Condux 08566110 Comfit Coupler 1" Condux 08566110 Push Lock

Comfit Push Fit Push Lock is a unique Hi-Tech coupler for HDPE cable ducts. Leak tested at 230 PSI and resistant to corrosion and most ...

Our Price: $4.23
Comfit Coupler 2" Condux 08566120 Comfit Coupler 2" Condux 08566120 Push lock

Comfit Push Fit Push Lock is a unique Hi-Tech coupler for HDPE cable ducts. Leak tested at 230 PSI and resistant to corrosion and most...

Our Price: $11.52
Condux 08078200 Foam Carrier 1/2" Condux 08078200 Foam Carrier 1/2"

Condux 08078200 Foam Carrier, lightweight carrier easily blow through duct. Best suited for start runs and operates with with multiple bends.
Specifications:
Duct Size: 1/2" (13 mm)
Max. OD: 0.50" (13 mm)

Our Price: $4.73
Condux 08078300 Foam Carrier 3/4" Condux 08078300 Foam Carrier 3/4"

Condux 08078300 Foam Carrier, lightweight carrier easily blows through duct. Best suited for shorrt runs and operates with multiple bends.
Specifications:

  • Duct Size: 3/4" (19 mm)
  • Max. OD: 0.75" (19 mm)

Our Price: $5.68
Condux 08566315 Straight Connector 10mm Condux 08566315 Straight Connector 10mm

Condux 08566315 Straight Connector, designed specifically for FTTX applications, condux micro-fit couplers ease of use chemical resistance and ability to accommodate the high pressures encountered when installing fiber with micro blowing equipment.
Nominal OD: 10mm

Our Price: $1.66
Condux 08676859, Speedball Insert Innerduct Split Coupling 1.00" Condux 08676859, Speedball Insert Innerduct Split Coupling 1.00"

Condux 08676859 Speedball Insert Innerduct Split Coupling Inserts, used for temporary joining all types of innerduct during the cable blowing process. *One Set includes Rubber Seal*
Specifications:

  • Nominal Size: 1.00" (25 mm)
  • Duct Type: 1" SDR 11 & 13.5
  • Mean Duct OD: 1.315" (33 mm)

Our Price: $106.49
Condux 08676860, Speedball Insert Innerduct Split Coupling 1.25" Condux 08676860, Speedball Insert Innerduct Split Coupling 1.25"

Condux 08676860 Speedball Insert Split Coupling, a hinged aluminum split coupling for temporarily joining all types on Innerduct during the cable blowing process. *One Set includes Rubber Seal*
Specifications:

  • Nominal Duct Size: 1.25" (32 mm)
  • Duct Type: 1 1/4" SDR 11, 13.5
  • Mean Duct OD: 1.660" (42 mm)

Our Price: $137.42
Condux 08676861, Speedball Insert Innerduct Split Coupling 1.50" Condux 08676861, Speedball Insert Innerduct Split Coupling 1.50"

Condux 08676861 Speedball Insert Split Coupling, a hinged aluminum split coupling for temporarily joining all types on innerduct during the cable blowing process. *One Set includes Rubber Seal*
Specification:

  • Nominal Duct Size: 1.50" (38 mm)
  • Duct Type: 1-1/2" SDR 11, 13.5
  • Mean Duct OD: 19.00" (48 mm)

Our Price: $175.80
Condux 08676862, Speedball Insert Innerduct Split Coupling 2.00" Condux 08676862, Speedball Insert Innerduct Split Coupling 2.00"

Condux 08676862 Speedball Insert Innerduct Split Coupling, a hinged aluminum split coupling for temporarily joining all types on innerduct during the cable blowing process. *One Set includes Rubber Seal*
Specifications:

  • Nominal Duct Size: 2.00" (61 mm)
  • Duct Type: 2.00" SDR 11, 13.5
  • Mean Duct OD: 2.375" (60 mm)

Our Price: $153.00
Condux 08676863, Speedball Insert Innerduct Split Coupling 40mm Condux 08676863, Speedball Insert Innerduct Split Coupling 40mm

Condux 08676863 Insert Innerduct Split Coupling, a hinged aluminum split coupling for temporarily joining all types on innerduct during the cable blowing process. *One Set includes Rubber Seal*
Specification:

  • Nominal Duct Size: 1.575" (40 mm)
  • Duct Type: 40 mm
  • Mean Duct OD: 1.575" (40 mm)

Our Price: $106.49
Condux 08761439 Foam Carrier (Sponge) 1.25" Condux 08761439 Foam Carrier (Sponge) 1.25"

Condux 08761439 Foam Carrier, this foam carrier is specially designed for spreading lubricant in duct prior to fiber optic cable blowing/jetting.
Specifications:

  • Carrier Size: 1.25" (31.8 mm)
  • Duct Range (Inside) Diameter: 1" SDR 13.5, 11 (25 - 22 mm)

Our Price: $72.41
Condux 08761440 Foam Carrier (Sponge) 1.50" Condux 08761440 Foam Carrier (Sponge) 1.50"

Condux 08761440 Foam Carrier, is specially designed for spreading lubricant in duct prior to fiber-optic
cable blowing/jetting.
Specification:

  • Carrier Size: 1.50" (38.1 mm)
  • Duct Range (Inside) Diameter: 1.25" (30-39 mm) SDR 13.5", 11

Our Price: $15.53
Condux 08761441 Foam Carrier (Sponge) 1.75" Condux 08761441 Foam Carrier (Sponge) 1.75"

Condux 08761441 Foam Carrier, is specially designed for spreading lubricant in duct prior
to fiber optic cable blowing/jetting.
Specifications:

  • Carrier Size: 1.75" (44.5 mm)
  • Duct Range (Inside) Diameter: 1.50" SDR 13.5, 11 (38 - 45 mm)

Our Price: $14.23
Condux 08761442  Foam Carrier (Sponge) 2.00" Condux 08761442 Foam Carrier (Sponge) 2.00"

Condux 08761442 Foam Carrier, is specially designed for spreading lubricant in duct prior
to fiber-optic cable blowing/jetting.
Specifications:

  • Carrier Size: 2.00" (50.8 mm)
  • Duct Range (Inside) Diameter: 2.00" SDR 13.5, 11 (46 - 52 mm)

Our Price: $18.23
Coupler Condu-Grip  CG-16NR (W/O SEAL) Coupler Condu-Grip CG-16NR (W/O SEAL) PIPE O.D. 1.660"

The original Condu-Grip provides a 100% long-term airtight and watertight seal for smooth wall PE conduit.....

Our Price: $5.35
Coupler Condu-Grip  CG-19 (W/SEAL) Coupler Condu-Grip CG-19 (W/SEAL) PIPE O.D. 1.90"

The original Condu-Grip provides a 100% long-term airtight and watertight seal for smooth wall PE conduit....

Our Price: $10.20
Coupler Condu-Grip  CG-19NR (W/O SEAL) Coupler Condu-Grip CG-19NR (W/O SEAL) PIPE OD 1.90"

Pullout Strength 3000LBSThe original Condu-Grip provides a 100% long-term airtight and watertight seal for smooth wall PE conduit. The NR (no 0-ring) model provides a sufficient seal for most cable blowing applications. All models have a very high tensile pullout resistance and the Condu-Grip is completely non-corrodable an all soil conditions and is simple to install with no special tool required. The Condu-Grip can be threaded or pressed on and still provide outstanding performance.
IPS PIPE OD 1.90" FOR 1.5" PIPE/DUCT

Our Price: $8.77
Coupler Condu-Grip  CG-23NR (W/O SEAL) Coupler Condu-Grip CG-23NR (W/O SEAL) PIPE O.D. 2.375"

The original Condu-Grip provides a 100% long-term airtight and watertight seal for smooth wall PE conduit....

Our Price: $11.38
DUR 20001866 MICRODUCT COLLET UNLOCKING TOOL DUR 20001866 MICRODUCT COLLET UNLOCKING TOOL

DUR 20001866 MICRODUCT COLLET UNLOCKING TOOL.




Our Price: $18.76
Dura-Line 20003907 Nylon Split-Lock + Coupler 1" SDR Dura-Line 20003907 Nylon Split-Lock + Coupler 1" SDR

Dura-line's Split Lock + is manufactured from a glass fiber that is reinforced with nylon resin. These heat and UV stabilized couplers provide an excellent impact strength. Conveniently reusable, making it ideal for temporarily coupling conduits, especially at slack-loop locations, as well as for air-assisted jetting applications. This coupler can be is easily assembled using a 7/16" nut driver.
Size: 1.00"
Features:

No special tools required
Reusable can install with cable inside
Heat, UV stabilized
Fungus and chemical resistant
Air and water tight
No I.D. reduction
Not recommended for plow chute
Meets UL 514B pullout requirements
ETL listed to UL STD 514B and CSA STD C22.2 18.3

Sold 1 ea.

Our Price: $24.57
Dura-Line 20003908 Nylon Split-Lock + Coupler 1.25" SDR Dura-Line 20003908 Nylon Split-Lock + Coupler 1.25" SDR

Dura-line's Split Lock + is manufactured from a glass fiber that is reinforced with nylon resin. These heat and UV stabilized couplers provide an excellent impact strength. Conveniently reusable, making it ideal for temporarily coupling conduits, especially at slack-loop locations, as well as for air-assisted jetting applications. This coupler can be is easily assembled using a 7/16" nut driver.
Size: 1.25"
Features:
No special tools required
Reusable can install with cable inside
Heat, UV stabilized
Fungus and chemical resistant
Air and water tight
No I.D. reduction
Not recommended for plow chute
Meets UL 514B pullout requirements
ETL listed to UL STD 514B and CSA STD C22.2 18.3

Sold 1 ea.

Our Price: $25.29
Dura-Line 20003909 Nylon Split-Lock + Coupler 1.50" SDR Dura-Line 20003909 Nylon Split-Lock + Coupler 1.50" SDR

Dura-line's Split Lock + is manufactured from a glass fiber that is reinforced with nylon resin. These heat and UV stabilized couplers provide an excellent impact strength. Conveniently reusable, making it ideal for temporarily coupling conduits, especially at slack-loop locations, as well as for air-assisted jetting applications. This coupler can be is easily assembled using a 7/16" nut driver.
Size: 1.50"
Features:

No special tools required
Reusable can install with cable inside
Heat, UV stabilized
Fungus and chemical resistant
Air and water tight
No I.D. reduction
Not recommended for plow chute
Meets UL 514B pullout requirements
ETL listed to UL STD 514B and CSA STD C22.2 18.3

Sold 1 ea.

Our Price: $27.72
Dura-Line 20003910 Nylon Split-Lock + Coupler 2" SDR Dura-Line 20003910 Nylon Split-Lock + Coupler 2" SDR

Dura-line's Split Lock + is manufactured from a glass fiber that is reinforced with nylon resin. These heat and UV stabilized couplers provide an excellent impact strength. Conveniently reusable, making it ideal for temporarily coupling conduits, especially at slack-loop locations, as well as for air-assisted jetting applications. This coupler can be is easily assembled using a 7/16" nut driver.
Size: 2.00"
Features:

No special tools required
Reusable can install with cable inside
Heat, UV stabilized
Fungus and chemical resistant
Air and water tight
No I.D. reduction
Not recommended for plow chute
Meets UL 514B pullout requirements
ETL listed to UL STD 514B and CSA STD C22.2 18.3

Sold 1 ea.

Our Price: $28.47
Duraline 20001491 Push-Lock 3/4" HDPE Coupler Duraline 20001491 Push-Lock 3/4" HDPE Coupler

Duraline 20001491, no heat or tools are needed. Simply push the duct ends into the coupler for a locked and air-sealed assembly.The compact profile of the PUSH-LOCK is well suited for use in pull boxes, vaults, or other limited-access areas such as narrow trenches. The non-metallic construction provides excellent corrosion resistance in buried or encased applications and also has desirable dielectric properties. The PUSH-LOCK is non-transparent and contains UV inhibitors, but is not recommend for aerial applications.
Size: 3/4"(27mm)

Our Price: $7.43
E-Coated Split-Lock Coupler 1" E-Coated Split-Lock Aluminum Coupler 1"

1" E-Coated Split-Lock Coupler Features: No special tools required One person installation simplified with Conduit Assembly Vise Reusable - can install with cable inside Air and Water tight Ideal for aerial No I.D. reduction Not recommended for plow chute ETL Listed to UL-514B standards* coupler for under-ground electrical applications. * ETL Listed for underground applications, HDPE conduit, and wet locations. General Information: A split aluminum coupler with a black E-Coating for superior corrosion protection from road salts. Used mostly with air-assisted systems such as an Air-Trak. The coupler is reusable and is ideal for temporarily coupling conduits; particularly at slack-loop locations. The coupler is assembled using a 7/16" nut driver or or IA 552 PR Palm Ratchet. An IA 552 DAV Duct Assembly Vise is used to hold the coupler during assembly to permit easy, one-operator installation. Certain sizes ETL Listed to UL-514B standards for use with HDPE and PVC for underground, above-ground or premise (indoor) applications.

SOLD 1 EA.

Our Price: $26.99
GMP 70726 16mm Clear Bodied Push-on Connectors for Micro Ducts (25 Pack) GMP 70726 16mm Clear Bodied Push-on Connectors for Micro Ducts (25 Pack)

GMP 70726, clear bodied push-on connector (coupler) is a no-tool connector that make it fast and easy to join two lengths of microducts of the same size.
Size: 0.63" (16mm)
*Pack of 25*

Our Price: $208.00
JONARD RST-8514 RISER SLITTER JONARD RST-8514 RISER SLITTER

RST-8514 Riser Slitting Tool
The RST-8514 Riser Slitting Tool. It is a mid-span slitter used to create
access in round FTTH riser cables. It works with 8.5 to 14mm round cables.
Easy to use: Press the tool against the cable to be accessed,
then grip the tool and the cable firmly in one hand and pull.
Replacement blades are available order a package of 25 using part number RST-RB25.

Also works as a micrduct slitter.





Our Price: $89.85
JONARD RST-RB25 REPLACEMENT BLADES FOR RST-8514 RISER SLITTING TOOL JONARD RST-RB25 REPLACEMENT BLADES FOR RST-8514 RISER SLITTING TOOL

Jonard RST-RB25 Replacement Blades

Replacement Blades for RST-8514. Blade material is SK-5 for long life.

Sold in packages of 25.









Our Price: $38.38
Microduct Endcap DUR 1-907149 ENDCAP 5MM Microduct Endcap DUR 1-907149 ENDCAP 5MM

Microduct Endcap DUR 1-907149 ENDCAP 5MM
20002863





Our Price: $5.20
Microduct Endcap DUR 1-907150 ENDCAP 7MM Microduct Endcap DUR 1-907150 ENDCAP 7MM

Microduct Endcap DUR 1-907150 ENDCAP 7MM





Our Price: $5.20
Microduct Endcap DUR 1-907151 ENDCAP 10MM CO CAPS 18MM Microduct Endcap DUR 1-907151 ENDCAP 10MM

DUR 20001482/ 1-907151 CO CAPS 10MM
Microduct Endcap 10mm




Our Price: $5.20
Microduct Endcap DUR 1-907152 ENDCAP 12MM Microduct Endcap DUR 1-907152 ENDCAP 12MM

DUR-1-907152-ENDCAP-12MM
20014004




Our Price: $5.20
Microduct Endcap DUR 1-908247 ENDCAP 16MM Microduct Endcap DUR 1-908247 ENDCAP 16MM

Microduct EndcapDUR 1-908247 ENDCAP 16MM
20001908






Our Price: $5.20
Microduct Endcap DUR 1-908811 ENDCAP 8.5MM Microduct Endcap DUR 1-908811 ENDCAP 8.5MM

Microduct Endcap DUR 1-908811 ENDCAP 8.5MM
20001819






Our Price: $5.20
Microduct Endcap DUR 20003431 Microduct Endcap DUR 20003431 CO CAPS 14mm

DUR 20003431 MICRODUCT ENDCAP 14MM



Our Price: $5.20
Microduct Endcap DUR 20001482 CO CAPS 12.7MM Microduct Endcap DUR-1-907153 CO CAPS 12.7MM

DUR 20001482/ 1-907153 CO CAPS 12.7MM
Microduct Endcap DUR 20001482 CO CAPS 12.7MM



Our Price: $5.20
Microduct EndcapDUR-1-907234 CO CAPS 18MM Microduct Endcap DUR-1-907234 CO CAPS 18MM

DUR 20001482/ 1-907234 CO CAPS 18MM
Microduct Endcap DUR 20001482CO CAPS 18mm



Our Price: $7.20
Microduct Straight Coupler DUR 20001462 5MM Coupler Microduct Straight Coupler DUR 20001462 5MM

Microduct Straight Coupler DUR 20001462 5MM Coupler
STRAIGHT COUPLER CLEAR WITH BLACK TIPS 22-14
Straight MicroDuct connector for 5mm MicroDuct. Transparency allows visual control when blowing MicroCable. Two locking clips can be ordered extra to prevent tube release. The connectors are able to be assembled and disassembled without the use of tools.





Our Price: $3.00
Microduct Straight Coupler DUR 20001463 7MM Coupler Microduct Straight Coupler DUR 20001463 7MM Coupler

Microduct Straight Coupler DUR 20001463 7MM Coupler
STRAIGHT COUPLER CLEAR WITH BLACK TIPS
Straight MicroDuct connector for 7mm MicroDuct. Transparency allows visual control when blowing MicroCable. Two locking clips can be ordered extra to prevent tube release. The connectors are able to be assembled and disassembled without the use of tools.

Our Price: $3.86
Microduct Straight Coupler DUR-20001431 CO MD 14MM STRA Microduct Straight Coupler DUR-20001431 CO MD 14MM STRA

Microduct Straight Coupler Micro duct Straight Coupler DUR-20001431-14mm
STRAIGHT COUPLER
Straight MicroDuct connector for 14mm Micro Duct. Transparency allows visual control when blowing MicroCable. Two locking clips can be ordered extra to prevent tube release. The connectors are able to be assembled and disassembled without the use of tools.

Our Price: $4.26
Microduct Straight Coupler DUR-20001517-16mm Microduct Straight Coupler DUR-20001517-16mm

Straight MicroDuct connector for 16mm MicroDuct. Transparency allows visual control when blowing MicroCable. Two locking clips can be ordered extra to prevent tube release. The connectors are able to be assembled and disassembled without the use of tools.

Microduct Straight Coupler DUR-20001517-16mm

Our Price: $7.07
Microduct Straight Coupler DUR-20001518-18mm Microduct Straight Coupler DUR-20001518-18mm

Microduct Straight Coupler Microduct Straight Coupler DUR-20001518-18mm
STRAIGHT COUPLER CLEAR
Straight MicroDuct connector for 18mm MicroDuct. Transparency allows visual control when blowing MicroCable. Two locking clips can be ordered extra to prevent tube release. The connectors are able to be assembled and disassembled without the use of tools.

Our Price: $7.07
Microduct Straight Coupler DUR-20001831-10mm Microduct Straight Coupler DUR-20001831-10mm

Microduct Straight Coupler Microduct Straight CouplerDUR-20001831-10mm
STRAIGHT COUPLER CLEAR
Straight MicroDuct connector for 10mm MicroDuct. Transparency allows visual control when blowing MicroCable. Two locking clips can be ordered extra to prevent tube release. The connectors are able to be assembled and disassembled without the use of tools.

.

Our Price: $4.64
Microduct Straight Coupler DUR-20001832-12.7mm Microduct Straight Coupler DUR-20001832-12.7mm

Microduct Straight Coupler Microduct Straight CouplerDUR-20001832-12.7mm
STRAIGHT COUPLER CLEAR
Straight MicroDuct connector for 12.7mm MicroDuct. Transparency allows visual control when blowing MicroCable. Two locking clips can be ordered extra to prevent tube release. The connectors are able to be assembled and disassembled without the use of tools.

.

Our Price: $5.31
Microduct Straight Coupler DUR-20001833-12mm Microduct Straight Coupler DUR-20001833-12mm

Microduct Straight Coupler Microduct Straight CouplerDUR-20001833-12mm
STRAIGHT COUPLER CLEAR
Straight MicroDuct connector for 12mm MicroDuct. Transparency allows visual control when blowing MicroCable. Two locking clips can be ordered extra to prevent tube release. The connectors are able to be assembled and disassembled without the use of tools.


.

Our Price: $4.66
Microduct Straight Coupler DUR-20001834-8.5mm Microduct Straight Coupler DUR-20001834-8.5mm

Microduct Straight Coupler Microduct Straight CouplerDUR-20001834 -8.5mm
STRAIGHT COUPLER CLEAR
Straight MicroDuct connector for 8.5mm MicroDuct. Transparency allows visual control when blowing MicroCable. Two locking clips can be ordered extra to prevent tube release. The connectors are able to be assembled and disassembled without the use of tools
.


.

Our Price: $3.92
MICROFIT COUPLER Condux 08566318 MICROFIT COUPLER Condux 08566318 14mm

Comfit is a unique Hi-Tech coupler for HDPE cable ducts. Leak tested at 230 PSI and resistant to corrosion and most...

Our Price: $2.46
Coupler Push-Lock 1" Dura-Line 1-20001844 Push Lock Coupler HDPE 1" Duraline 1-20001844

Installation is fast and easy; no heat or tools are needed. Simply push the duct ends into the coupler for a locked and....

Our Price: $5.20
Coupler Push-Lock 1 1/4" Dura-Line 1-908354 Push Lock Coupler HDPE 1-1/2" Dura-Line 1-908354

Installation is fast and easy; no heat or tools are needed. Simply push the duct ends into the coupler for a....

Our Price: $6.49
Push Lock Coupler HDPE 1.25" Duraline 1-908355 Push Lock Coupler HDPE 1.25" Duraline 1-908355

Installation is fast and easy; no heat or tools are needed. Simply push the duct ends into the coupler for a locked and air-sealed assembly. The compact profile of the PUSH-LOCK is well suited for use in pull boxes, vaults, or other limited-access areas such as narrow trenches.

Our Price: $5.59
Coupler Push-Lock 2" Dura-Line 1-20001847 Push Lock Coupler HDPE 2" DuraLine-1-20001847

Installation is fast and easy; no heat or tools are needed. Simply push the duct ends into the coupler for a...

Our Price: $8.50
   
 
1 2