Fluke Network TS19 19800009 Telephone Test Set
The Fluke Networks TS19 Test Set combines all the essential test set features at an affordable price. This test set was specifically designed for in-house telecom technicians. Its high impedance monitor prevents accidental disruption of service from clipping onto a data line while in monitor mode, thus ensuring the integrity of critical data lines. Features such as tone (DTMF) or pulse operation, talk/monitor capabilities, polarity test button and last number redial make this test set the perfect combination of features and price.
Specifications:

• Loop Limit: 2.4 KO Maximum at 48 VDC (nominal 15 mA minimum loop current)
• DC Resistance ( Talk Mode) : 150 O typical at 80 MA current
• AC Impedance ( Monitor Mode) : Low Impedance (ring position) 600 at 1 KHz
• Rotary Dial Output: 10 pps. 5 pps
• Pulsing Rate: 60% + 2%
• Percent Break: 800 ms typical
• Interdigit Internal Leakage during break: 50 KO
• DTMF Output: +1% maximum
• Tone Frequency Error Level per tone pair: dbm maximum - dbm maximum
• High versus low tone difference: 4 db maximum
• Length: 8.75" (22.2cm)
• Width: 2.375" (6.03cm)
• Height: 3.375" (8.57cm)

3M™ SLiC™ Aerial Closure has a floating bond and a rubber end seal that ensures a snug fit for cables while eliminating
the need for drip collars. This 1-piece, dual-wall, molded closure is designed for construction or maintenance situations
3M SLiC Aerial Closure has a floating bond and interlocking ends that expand to meet a sheath opening of any size
without the use of any special kits. The 1-piece construction of this closure provides complete splice access after
placement and without the removal of the closure or the bonding from a cable.
H-30SLIC-3.6X19-FB Aerial Closure Kit with Float Bond & Rubber End Seal
Specifications:

• 3M ID: 80611166804
• Applications: Aerial Strand Mount
• Bonding Type: Floating Bond
• Closure Type: Free Breathing
• Connector Type: Discrete, Modular
• Encapsulated: No
• End Seals Included: (2) triple port
• End Seal Type: Rubber End Seal
• Extendable: No
• Flame Retardant: No
• Indoor/Outdoor: Outdoor
• Maximum Cable Pair Count: 100 Pair, 200 Pair
• Maximum Discrete Pair Count: 100 Pair
• Maximum Modular Pair Count: 200 Pair
• Maximum Splice Bundle Diameter: 3.60 Inch
• Maximum Splice Opening: 14.00 Inch
• Product Type: Closure Kit
• Sheath Retention: No
• Shield Bond Connector Included: No
• Solution for: Access Network: FTTH/FTTB/CATV, Access Network: xDSL
• Trademark: SLiC

H-3M710-BC1-25 Pair Bridge Splice Connector Filled Module
Bridge connectors are used in conjunction with either straight-only connectors or straight/half-tap connectors to permit pluggable 3-way splices, 25 pairs at a time.
Features:

• Connector Pair Count: 25
• Connector Type: Bridge
• Modular Type: 710
• 26-22 Gauge, 0.40/0.65 mm (0.016/0.020 In.)

H-3M710-TC1-25 Pair Straight/Half -Tap Modular with Solid Cap Splice Connectors
Straight/Half-Tap splice connectors permit the joining of two cables, 25 pairs at a time. They may also be used for rearranging and transferring cable without interrupting service.
Features:

• Connector Pair Count: 25
• Connector Type: Straight/Half-Tap
• Modular Type: 710
• 26-24 Gauge, 0.40/0.51mm (0.016/0.020 In.)

3M™ SLiC™ Aerial Closure has a floating bond and a spiral-end seal that ensures a snug fit for cables while eliminating the need for drip collars. This 1-piece, dual-wall, molded closure is designed for construction or maintenance situations.

Closure, Aerial, Kit With Floating Bond And Spiral End Seal 3x33, 3M Closure, Aerial, Kit With Floating Bond And Spiral End Seal 3x33, 3M Features fewer parts and easier installation with the 3M SLiC Aerial Closure, Superior seal, Easily adaptable, Single piece design, Double wall molded construction, Made from durable, rugged materials, Easy to access and reenter. Additional Information Standard Package Quantity: 1.0 each Gross Weight: 5.8000 lbs Product Number SLIC3.6X33SES

SLIC AERIAL CLOSURE 400 PAIR 3MSLIC3.6X33SES