You are here: Home > Pole Line Hardware > Eye Nuts
We found 29 results matching your criteria.
Eye Nuts
Sort By:
1
DEADEND BRACKET SF-YDB DEADEND BRACKET SF-YDB

ROLLER ASSEMBLIES ON EACH SIDE. 2" X 3/8 X 40-3/4 WITH 11/16 HOLE EACH SIDE 20.38 LONG USED FOR DEAD-END APPLICATIONS WITH WIRE FORMS OR STRAND VISE ON OPPOSING SIDES OF POLES YOKE or DEADEND BRACKET SF-YDB

Our Price: $185.80
Klein 66090  2-In-1 Slotted Impact Socket Set, 12-Point, 6-Piece Klein 66090 2-In-1 Slotted Impact Socket Set, 12-Point, 6-Piece

New sockets from Klein Tools coming soon

Klein Tools 2-In-1 Slotted Impact Socket Set, 12-Point, 6-Piece
  • Twelve sizes combined into six sockets including: 1-1/8 x 15/16-Inch, 1 x 13/16-Inch, 7/8 x 11/16-Inch, 3/4 x 9/16-Inch, 5/8 x 7/16-Inch, and 1/2 x 3/8-Inch
  • 1-1/8 x 15/16-Inch and 3/4 x 9/16-Inch impact sockets features an alignment slot to tighten and loosen most pole hardware
  • Single-ended impact socket wrenches with hands free adjustment between socket sizes
  • Two coaxial spring loaded sockets in one tool
  • Sockets have a high-torque, 12-Point design making it easier to position on fasteners
  • Deep socket with a 1/2-Inch drive works great for pole hardware installation and removal
  • Cross hole design helps maintain socket connection to adapter or impact wrench
  • Engineered for use with impact wrenches including Klein's 1/2-Inch Compact Impact Wrench (Cat. Nos. BAT20-CW, BAT20-CW1)
  • Sockets are color coded to quickly identify slotted and sizes
  • Includes case for storage

Wall Strap 9/16 Hole J7527 Wall Strap 9/16 Hole J7692 8" Long

Used to terminate strand at a right angle to the building wall. A wire rope thimble is recommended to protect the strand when using the wall strap. 1 7/32 X 15/64  x 8" Long W 9/16 HOLES J7692

Our Price: $10.86
Twin Eyenut 5/8" J6515 Twin Eyenut 5/8" J6515 for 5/8 Hardware

Not for any Type of Anchor rods. Twin eye-nuts accommodate double guys. For 5/8-11 hardware. Will not fit D-62 Rod .

Twin Eyenut 5/8" J6515

Our Price: $16.36
24-3/8" Wall Strap Long Thimble Eye J7696 Wall Strap 24-3/8" Long Thimble Eye J7696

Wall straps are used for guying and deadending messenger strand to building walls.

  • 24-3/8" Wall Strap Long Thimble eye
  • 2-9/16" diameter holes spaced
  • 8" from center to center.

Our Price: $18.54
Thimble Eyenut 1" J16512-ALL5095 Single Thimble Eyenut 1" J16512-ALL5095 for 1" Hardware or D100 Pisa Rods

3/4" AND 1" SINGLE EYE NUT FOR HELICAL ANCHORS

Thimble eyenuts are tapped to fit 1" hot dip galvanized bolts made to ANSI Specifications and are designed to develop strength ratings consistent with the bolts with which they are used.

*Can be use with 1" Hardware or PISA® Anchor Rod 1" X 7' D100 PISA® Anchor Rod 3/4" x 7' D75

Our Price: $7.97
Oval Eyenut 3/4" J1093 Oval Eyenut 3/4" J1093 for 3/4" Hardware

Not for any type of anchor rods. Oval eyenuts are used for deadending with suspension or strain insulators. Oval eye nuts are tapped to fit hot dip galvanized bolts made to ANSI Specifications and are designed to develop strength ratings consistent with the bolts with which they are used.

Our Price: $4.81
Thimble Eyenut 3/4" J6511 Thimble Eyenut 3/4" J6511 for 3/4" Hardware

Not for any type of anchor rods. 3/4" Thimble eyenuts are tapped to fit hot dip galvanized bolts made to ANSI Specifications and are designed to develop strength ratings consistent with the bolts with which they are used.
Thimble eye nuts are used for span, head and stub guying.

Our Price: $5.91
Thimble Eyenut 5/8" J6510 Single Thimble Eyenut 5/8" 5049 for Pisa Anchor Rod D62 ONLY *Not for 5/8 Hardware*

5/8" SINGLE EYE NUT FOR HELICAL ANCHORS D62 RODS ONLY *Not for 5/8 Hardware*

Thimble eyenuts are tapped to fit hot dip galvanized 5/8 anchor rod made to ANSI Specifications and are designed to develop strength ratings consistent with the rods with which they are used.

*Will not fit regular 5/8 hardware. The 5049 Thimble Eyenut to fit
PISA® Anchor Rod 5/8" X 7' D62

Our Price: $3.41
3/8" WIRE ROPE THIMBLE J1057 3/8" WIRE ROPE THIMBLE J1057

Used in guying applications to form an oval wire eye for securing to eye-bolts and guy rods.

  • Thimble, Wire Rope: Type - Guy Open Wire Rope
  • Strand Diameter - 3/8 in
  • Opening Width - 5/8 in
  • Eye Width - 7/8 in
  • Eye Length - 1 7/8 in
  • Material - Steel, Hot Dipped Galvanized
  • Weight - 8.80 lb/100.

THIMBLE OPEN 3/8 Guy Strand J1057

Our Price: $3.40
1/2" WIRE ROPE THIMBLE J1058 1/2" WIRE ROPE THIMBLE J1058

Used in guying applications to form an oval wire eye for securing to eye-bolts and guy rods.
  • Thimble, Wire Rope: Type - Guy Open Wire Rope
  • Strand Diameter - 1/2 in
  • Opening Width - 3/4 in
  • Eye Width - 1 1/8 in
  • Eye Length - 2 in
  • Material - Steel, Hot Dipped Galvanized
  • Weight - 18.40 lb/100

THIMBLE OPEN 1/2 Guy Strand J1058

Our Price: $3.69
ANGLE THIMBLE EYELET 5/8" J6500 ANGLE THIMBLE EYELET 5/8" J6500

Features: Eyelets, also known as Bolt Eyes, are used under the head or nut of a bolt. All are compatible with the strength of the bolts used with them. Straight thimble eyelets are used for span guys while angle thimble eyelets are used for down guys. Standard eyelets are used for deadending.Standard eyelets and straight thimble eyelets have a slotted hole for ease in inserting the bolt.
Angle Thimble Eyelets
Catalog NumberBolt Diameter (Inches)Max StrandWeight/100 (lbs)
J65005/81/2127


ANGLE THIMBLE EYELET H-J6500

Our Price: $9.53
16-7/8" Wall Strap Long Thimble Eye J7695 Wall Strap 16-7/8" Shot Thimble Eye J7695

Wall straps are used for guying and deadening messenger strand to building walls

  • 16-7/8" Wall Strap
  • 2 holes space with 9/16" diameter
  • 8" from center to center.

Our Price: $43.00
Thimble Eyenut 5/8" J6510 Thimble Eyenut 5/8" J6510 for 5/8" Hardware

Not for any type of anchor rods. Thimble Eyenut 5/8" J6510 Thimble eyenuts are tapped to fit hot dip galvanized bolts made to ANSI Specifications and are designed to develop strength ratings consistent with the bolts with which they are used.Thimble eyenuts are used for span, head and stub guying.

Thimble Eyenut 5/8" J6510

Our Price: $4.74
Oval Eyenut 5/8" J1092 Oval Eyenut 5/8" J1092 for 5/8" Hardware

Not for any type of anchor rods. Oval eyenuts are used for deadending with suspension or strain insulators. Oval eyenuts are tapped to fit hot dip galvanized bolts made to ANSI Specifications and are designed to develop strength ratings consistent with the bolts with which they are used.

Our Price: $4.13
Twin Eyenut 3/4" THIMBLE EYENUT H-J6516 THIMBLE EYENUT Twin Eyenut 3/4" J6516/All 5046 for 3/4" Hardware

Not for any Anchor Rods Twin eyenuts are tapped to fit hot dip galvanized bolts made to ANSI Specifications and are designed to develop strength ratings consistent with the bolts with which they are used. Twin eye nuts accommodate double guys. J6516 /All 5046Twin eye nut

Our Price: $5.73
1/2"-13 Oval Eye Nut  6510 ALLIED BOLT 5875 1/2"-13 Oval Eye Nut J1091 ALLIED BOLT 5875

Used for dead-ending and guying from the threaded ends of crossarm bolts. Rated to support a 22,000 lb. load. Forged from AISI 1018 Steel. Hot dip galvanized to meet ASTM Specification A153.

Our Price: $2.00
ANGLED SINGLE STRAND EYELET 3/4"  H-J65034/ALL2061 ANGLED SINGLE STRAND EYELET 3/4" H-J6501/ALL2061

3/4" ANGLED SINGLE STRAND EYELET for 3/4" Hardware
Straight thimble eyelets are used for span guys while angle thimble eyelets are used for down guys. Standard eyelets are used for deadending. Standard eyelets and straight thimble eyelets have a slotted hole for ease in inserting the bolt.
Allied Bolt part# 2061 Older Maclean part# was a J6501
Used with machine bolts or eyebolts for down guying.
Forged from high strength AISI 1018 Steel.
Hot dip galvanized to meet ASTM Specification A153.
Ultimate tensile strength is 45° is 28,000.


Our Price: $15.06
OVAL EYE BOLT  5/8 X10" J9410 5/8 X 10" OVAL EYE BOLT H-J9410

OVAL EYE BOLT H-J9410 5/8 X10"

Eyebolts are forged, one piece design and are commonly used as an attachment point to secure thimbles, clevises, links and deadend insulators. Regular oval eyebolts are supplies with a 4 or 6 inch thread length and one assembled square nut.

Eye I.D. 1-1/2" width x 2" length
  • Hot Dip Galvanized

Our Price: $6.61
OVAL EYE BOLT 5/8 X12" J9412 5/8 X 12" OVAL EYE BOLT H-J9412

OVAL EYE BOLT H-J9412 5/8 X12"

Eyebolts are forged, one piece design and are commonly used as an attachment point to secure thimbles, clevises, links and deadend insulators. Regular oval eyebolts are supplies with a 4 or 6 inch thread length and one assembled square nut.

Eye I.D. 1-1/2" width x 2" length
  • Hot Dip Galvanized

Our Price: $8.71
SALE Price: $6.78
You save $1.93!
OVAL EYE BOLT 5/8 X14" J9414 5/8 X 14" OVAL EYE BOLT J9414

OVAL EYE BOLT H-J9414 5/8 X14"

Eyebolts are forged, one piece design and are commonly used as an attachment point to secure thimbles, clevises, links and deadend insulators. Regular oval eyebolts are supplies with a 4 or 6 inch thread length and one assembled square nut.

Eye I.D. 1-1/2" width x 2" length
  • Hot Dip Galvanized

Our Price: $7.93
OVAL EYE BOLT H-J9416  5/8 X16" OVAL EYE BOLT H-J9416 5/8 X16"

OVAL EYE BOLT H-J9416 5/8 X16"

Eyebolts are forged, one piece design and are commonly used as an attachment point to secure thimbles, clevises, links and deadend insulators. Regular oval eyebolts are supplies with a 4 or 6 inch thread length and one assembled square nut.

Eye I.D. 1-1/2" width x 2" length
  • Hot Dip Galvanized

Our Price: $10.81
OVAL EYE BOLT 5/8 X18" J9418 5/8 X 18" OVAL EYE BOLT J9418

OVAL EYE BOLT H-J9418 5/8 X18"

Eyebolts are forged, one piece design and are commonly used as an attachment point to secure thimbles, clevises, links and deadend insulators. Regular oval eyebolts are supplies with a 4 or 6 inch thread length and one assembled square nut.

Eye I.D. 1-1/2" width x 2" length
  • Hot Dip Galvanized

Our Price: $13.17
OVAL EYE BOLT 5/8 X8" J9408 5/8 x 8" OVAL EYE BOLT H-J9408

OVAL EYE BOLT H-J9408 5/8 X8"

Eyebolts are forged, one piece design and are commonly used as an attachment point to secure thimbles, clevises, links and deadend insulators. Regular oval eyebolts are supplies with a 4 or 6 inch thread length and one assembled square nut.

Eye I.D. 1-1/2" width x 2" length
  • Hot Dip Galvanized

Our Price: $6.73
Straight Thimble Slip Eye 3/4" H-J6551-ALL2051 for 3/4" Hardware Straight Thimble Slip Eye 3/4" H-J6551-ALL2051 for 3/4" Hardware

Not for any type of anchor rods. Eyelets, also known as eyes, are used under the head or nut if a bolt. Straight thimble eyelets are used for span guys. EYELET 3/4" THIMBLE STRT GALV STL.

Straight Thimble Slip Eye J6551

Our Price: $8.33
Triple Eyenut  1" J12585-KOR3127 Triple Eyenut 1" J12585

Used Only in conjunction with PISA D100 1" Anchor rods , D10031C 1" x 3-1/2ft or D75 rod for helical and Manta Ray anchors.

Our Price: $12.03
Straight Thimble Slip Eye J6550C Straight Thimble Slip Eye 5/8" J6550C for 5/8" Hardware

Not for any type of anchor rods. Straight Thimble Slip Eye J6551 Eyelets, also known as Slip eyes, are used under the head or nut if a bolt. Straight thimble eyelets are used for span guys. Mounting Bolt Hole: 1"x 11/16". Bolt Size: 5/8.

Straight Thimble Slip Eye J6550C

Our Price: $9.66
SHOULDER EYEBOLT 3/4"X16"  J9536 SHOULDER EYEBOLT 3/4"X16" J9536

SHOULDER EYEBOLT 3/4 INCH DIAMETER, MINIMUM TENSILE STRENGTH 20,050 LBS

Eyebolts are forged, one piece design and are commonly used as an attachment point to secure thimbles, clevises, links and deadend insulators. Regular oval eyebolts are supplies with a 4 or 6 inch thread length and one assembled square nut.

Our Price: $18.36
PLP 0006547 Thimble 1/2" for ADSS Drop Cable Dead Ends 0006547 1/2" Open Thimble for ADSS Drop Cable Dead Ends PLP 0006547

Thimble Open, ADSS Drope Cable Dead-Ends 1/2 in; Opening Width - 3/4 in; Eye Width - 1 1/8 in; Eye Length - 2 in; Material - Steel, Plated

THIMBLE OPEN 1/2 Guy Strand J1058

Our Price: $1.10
SALE Price: $0.89
You save $0.21!
   
 
1