You are here: Home > Underground Tools > Pulling Grips & Swivels - Cable & Fiber
We found 79 results matching your criteria.
Cable & Fiber Pulling Grips & Swivels
Sort By:
1 2
Condux 0864375 Fiber Optic Pulling Grip 0.21-0.35" Fiber Optic Pulling Grip 0.21-0.35" Condux 08643754

Double/Single weave mesh, galvanized steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip
  • Cable Diameter Range: 0.21-0.35"
  • Approx. Breaking Point: 1,400 lbs.
  • Eye Length: 7-1/2"
  • Mesh Length: 14"

Condux 0864375 Fiber Optic Pulling Grip 0.10-0.22" Fiber Optic Pulling Grip 0.10-0.22" Condux 08643753

Double/Single weave mesh, galvanized steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip

  • Cable Diameter Range: 0.10-0.22"
  • Approx. Breaking Strength: 900 lbs.
  • Eye Length: 7-1/2"
  • Mesh length: 10"

Condux 08914120 Fixed Head Innerduct Pulling Eye 1"-1.25, 1.06"-1.43" Fixed Head Innerduct Pulling Eye 1"-1.25, 1.06"-1.43" Condux 08761842

Condux 08761842 Fixed Head Innerduct Pulling Eye 1"-1 1/4", 1.06-143"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

Condux 0864375 Fiber Optic Pulling Grip 0.53-0.74" Fiber Optic Pulling Grip 0.53-0.74" Condux 08643757

Double/Single weave mesh, galvanized steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip

  • Cable Diameter Range: 0.53-0.74"
  • Approx. Breaking Strength: 3,000 lbs.
  • Eye Length: 8-1/2"
  • Mesh Length: 23"

Condux 08643756 Fiber Optic Pulling Grip 0.42-0.61" Fiber Optic Pulling Grip 0.42-0.61" Condux 08643756

Double/Single weave mesh, galvanized steel for outside plant cable. Used for installation of fiber optic communication lines either underground, overhead, through enclosures. They will fit single cables or cables bundles, are easily installed on the cable and are reusable.
Fiber Optic - Low Profile, Double/Single Weave, Low Profile Grip

  • Cable Diameter Range: 0.42-0.61"
  • Approx. Breaking Strength: 2,500 lbs.
  • Eye Length: 8-1/2"
  • Mesh Length: 21"

Condux 0864375 Fiber Optic Pulling Grip 0.75-1.00" Fiber Optic Pulling Grip 0.75-1.00" Condux 08643759

Double/Single weave mesh, galvanized steel for outside plant cable. Used for installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip

  • Cable Diameter Range: 0.75-1.00"
  • Approx. Breaking Strength: 2,500 lbs.
  • Eye Length: 8-1/2"
  • Mesh Length: 28"

GMP-70670 Double Weave-Single Flexible Pulling Grip 0.33-0.78" Double Weave-Single Flexible Pulling Grip 0.33-0.78" GMP 70670

The GMP Double Weave Pulling Grip is manufactured for high-tensile, galvanized steel wire that is evenly hand woven in a single, double or triple wire weave according to pulling tension requirements. GMP reverse weave our grips which create a loop at the end of the grip instead of being crimped or soldered together. the wire is then joined under the crimped head. This creates a higher quality product that outlasts competition.
Double Weave Single Flexible Eye
Cable Diameter: 0.33-0.78" (10-20mm)
Grip Length: 23.62" (600mm)
Min. Breaking Strength: 4101 lbs.

Our Price: $48.00
Condux 08017200 Breakaway Swivel 5/8" 600 lbs. Breakaway Swivel 5/8" 600 lbs. Condux 08017200

Condux 08017200 Breakaway Swivel 5/8" 600 lbs.
Essential for fiber optic and coaxial cable pulling, these swivels have a break load ranging from 150–1,800 pounds (667–8,006 N) and are designed to separate at ±10% of their rated break load. If the load rating is exceeded, the interior break pin fractures, the swivel separates, and the cable remains undamaged.
SUB - GMP71408

Condux 08033442 Swivel Coupling 5/16-18MF Swivel Coupling 5/16-18MF Condux 08033442

Condux 08033442 Swivel Coupling, used to connect two duct rods pushed into the conduit from the same end used when one length of duct rod is not long enough for the full conduit run. Also used as a rotating swivel when pulling or rope with pulling wire or rope with Tapered head or Mini-Harness.
USC Thread: 5/16-18

Condux 08761844 Fixed Head Innerduct Pulling Eye 1.5", 1.37"-1.68" Fixed Head Innerduct Pulling Eye 1 .5", 1.37"-1.68" Condux 08761844

Condux 08761844 Fixed Head Innerduct Pulling Eye 1.5", 1.37-1.68"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

Condux 08761846 Fixed Head Innerduct Pulling Eye 2", 1.80"-2.19" Fixed Head Innerduct Pulling Eye 2", 1.80"-2.19" Condux 08761846

Condux 08761846 Fixed Head Innerduct Pulling Eye 2", 1.80-2.19"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

Condux 08914130 Fixed Head Innerduct Pulling Eye 1-1/4", 1.06"-1.43" Fixed Head Innerduct Pulling Eye 1-1/4", 1.06"-1.43" Condux 08914130

Condux 08914130 Fixed Head Innerduct Pulling Eye 1-1/4", 1.06" -1.43"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60512

Condux 08914140 Fixed Head Innerduct Pulling Eye 1-1/2", 1.37"-1.68" Fixed Head Innerduct Pulling Eye 1-1/2", 1.37"-1.68" Condux 08914140

Condux 08914140 Fixed Head Innerduct Pulling Eye 1-1/2", 1.37"-1.68"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60515

Condux 08914150 Fixed Head Innerduct Pulling Eye 1-3/4", 1.68"-1.81" Fixed Head Innerduct Pulling Eye 1-3/4", 1.68"-1.81" Condux 08914150

Condux 08914150 Fixed Head Innerduct Pulling Eye 1-3/4", 1.68"-1.81"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

Condux 08914160 Fixed Head Innerduct Pulling Eye 2", 1.93"-2.12" Fixed Head Innerduct Pulling Eye 2", 1.93"-2.12" Condux 08914160

Condux 08914160 Fixed Head Innerduct Pulling Eye 2", 1.93"-2.12"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60520

Condux 08914120 Fixed Head Innerduct Pulling Eye 1", 0.93"-1.06" Fixed Head Innerduct Pulling Eye 1", 0.93"-1.06" Condux 08914120

Condux 08914120 Fixed Head Innerduct Pulling Eye 1", 0.93"-1.06"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60510

Condux 08960712 Pulling Eye, Inner-Duct 1-1/4" Swivel Head Pulling Eye, Inner-Duct 1-1/4" Swivel Head Condux 08960712

Condux 08960712 Pulling Eye, Inner-Duct 1-1/4" Swivel Head

The Innerduct Pulling Eye is a hybrid tool that combines features from standard innerduct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the innerduct as it is installed. It eliminates the need for a separate swivel on each pulling eye when installing single innerducts into individual conduits or multiple innerducts into a single conduit. Its short length is an advantage on tight bends compared to using a separate swivel and pulling eye. Easily installed using a 1-3⁄8" deep socket or adjustable wrench.

NOTE: To determine correct pulling eye size, obtain the actual innerduct inside diameter (I.D.). The I.D. measurement must be greater than dimension A and smaller than dimension B.
SUB - GMP61512

Specification:
ID Range: 1.00-1.25"

Condux 08960715 Pulling Eye, Inner-Duct 1-1/2" 1.37"- 1.5" Swivel Head Pulling Eye, Inner-Duct 1-1/2" 1.37" - 1.5" Swivel Head Condux 08960715

Condux 08960715 Pulling Eye, Inner-Duct 1.37" - 1.50" Swivel Head
The Inner-duct Pulling Eye is a hybrid tool that combines features from standard inner-duct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the inner-duct as it is installed. It eliminates the need for a separate swivel on each pulling eye when installing single innerducts into individual conduits or multiple inner-ducts into a single conduit. Its short length is an advantage on tight bends compared to using a separate swivel and pulling eye. Easily installed using a 1-3⁄8" deep socket or adjustable wrench.
SUB - GMP61515

Specification:
ID Range: 1.37" - 1.50"
Max OD: 1.50"

Condux 08960720 Pulling Eye, Inner-Duct 2" Swivel Head Pulling Eye, Inner-Duct 2" Swivel Head Condux 08960720

Condux 08960720 Pulling Eye, Inner-Duct 2" Swivel Head
The Inner-duct Pulling Eye is a hybrid tool that combines features from standard inner-duct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the inner-duct as it is installed. It eliminates the need for a separate swivel on each pulling eye when installing single innerducts into individual conduits or multiple inner-ducts into a single conduit. Its short length is an advantage on tight bends compared to using a separate swivel and pulling eye. Easily installed using a 1-3⁄8" deep socket or adjustable wrench.
SUB - GMP61520

Specification:
ID Range: 2"


Condux 08581231 Threaded Chain Connector 5/16" 1430 Lbs Threaded Chain Connector 5/16" 1430 Lbs Condux 08581231

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Note: To be used for cable stringing or pulling only. 5/16" 1430 Lbs

Condux 08581237 Threaded Chain Connector 3/8" 1,760 Lbs Threaded Chain Connector 3/8" 1,760 Lbs Condux 08581237

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.


Note: To be used for cable stringing or pulling only. 3/8" 1,760 Lbs

Condux 08581250 Threaded Chain Connector 1/2" 2,755 Lbs Threaded Chain Connector 1/2" 2,755 Lbs Condux 08581250

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.


Note: To be used for cable stringing or pulling only. 1/2" 2,755 Lbs

Condux 08581256 Threaded Chain Connector 9/16" 4410 Lbs Threaded Chain Connector 9/16" 4410 Lbs Condux 08581256

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.


Note: To be used for cable stringing or pulling only. 4410 Lbs 14.3mm

Condux 08581262 Threaded Chain Connector 5/8" 5510 Lbs Threaded Chain Connector 5/8" 5510 Lbs Condux 08581262

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.


Note: To be used for cable stringing or pulling only. 5/8" 5510 Lbs

CONDUX 08580837 Figure 8 Swing Link 3/8" 900lbs Figure 8 Swing Link 3/8" 900lbs Condux 08580837

For quick connections to winch line or pulling harnesses.

Note: To be used for cable stringing or pulling only.

CONDUX 08580850 Figure 8 Swing Link 1/2" 1,620lbs Figure 8 Swing Link 1/2" 1,620lbs Condux 08580850

For quick connections to winch line or pulling harnesses.

Note: To be used for cable stringing or pulling only.

CONDUX 08580875 Figure 8 Swing Link 3/4" 3600lbs Figure 8 Swing Link 3/4" 3600lbs Condux 08580875

For quick connections to winch line or pulling harnesses.

Note: To be used for cable stringing or pulling only.

CONDUX 08580899 Figure 8 Swing Link 1" 8100lbs Figure 8 Swing Link 1" 8100lbs Condux 08580899

For quick connections to winch line or pulling harnesses.

Note: To be used for cable stringing or pulling only.

CONDUX 08581225 Threaded Chain Connector 1/4" 770 Lbs Threaded Chain Connector 1/4" 770 Lbs CONDUX 08581225

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.


Note: To be used for cable stringing or pulling only. 1/4" 770 Lbs 6.4mm

CONDUX 08030003 Power Dart® Blower Power Dart® Blower Condux 08030003

The Condux Power Dart Blower Is a pneumatic rodding system especially suited for long duct runs. A three-motor system allows you to choose the right speed for your needs. With all three motors engaged, it will deliver up to 300 cfm (8.5 m3/min) of
air at 3 psi (.2 bar) max. pressure, easily blowing 1⁄2" (13 mm) poly line or
measuring tape over 2,000 feet (610 m) in conduit up to 6 inches (152 mm) in diameter.
Requires a 3,000 watt generator 110 Volt model includes a 30 amp twist plug adapter.

Condux 08643755 Fiber Optic Pulling Grip 0.32-0.48" Fiber Optic Pulling Grip 0.32-0.48" Condux 08643755

Double/Single weave mesh, galvanized steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip

  • Cable Diameter Range: 0.32-0.48"
  • Approx. Breaking Strength: 2,000 lbs.
  • Eye Length: 8-1/2"
  • Mesh Length: 19"

CONDUX 08030011 Carrier Kit for  Power Dart® Blower -CONDUX 08030003 Power Dart® Blower Carrier Kit for Power Dart® Blower Condux 08030011

A convenient way to order a practical assortment of carriers and seal-off products for use with the Power Dart Blower or other applications.

Condux 08643716 Fiber Optic Pulling Grip 0.38-0.49" Fiber Optic Pulling Grip 0.38-0.49" Condux 08643716

Fiber Optic Slack Grip - Split Mesh, Rod Closing, Single Weave steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.

Condux 08017000 - 808 Champion Swivel 5/8" 600 lbs. 808 Champion Swivel 5/8" 600 lbs. Condux 08017000

Condux 08017000 - 808 Champion Swivel 5/8" 600 lbs.(Not a Breakaway swivel)
Condux Ball Bearing Swivels are designed to the highest specifications for underground and overhead pulling applications. All swivels are tested and inspected to ISO 9001:2000 quality standards. This ensures the customer is getting the most reliable and safest swivel on the market.
All swivels are precision machined from high grade stainless steel. Clevis pins are heat treated to prevent pin damage when using steel shackles. Each swivel is manufactured with three angular contact or deep groove ball bearings, which allow the swivel to rotate beyond its rated load. Most manufacturers use only one bearing to handle the load, causing the swivels to stop rotating before it reaches the recommended workload.

Condux 08017205 Replacement Breakaway Pin for 5/8" Swivel 600 lbs. Replacement Breakaway Pin for 5/8" Swivel 600 lbs. Condux 08017205

Condux 08017205 Replacement Breakaway Pin for 5/8" Swivel 600 lbs.
Condux Breakaway Swivel are essential for fiber optic and coaxial cable pulling, these swivels have a break load ranging from 150-1,800 lbs. (667-8,006 N) and are designed to separate at 5 percent of their rated break load. If the load rating is exceeded, the interior break pin fractures, the swivel separates, and the cable remains undamaged.
Replacement Breakaway Pin for 5/8" Swivel
Workload: 600 lbs.

Condux 08017700 Breakaway Swivel 7/8" 1700 lbs. Breakaway Swivel 7/8" 1700 lbs. Condux 08017700

Condux 08017700 Breakaway Swivel 7/8" 1700 lbs

Essential for fiber optic and coaxial cable pulling, there swivels have a break load ranging from 150-1,800 pounds (667-8,006 N) and are designed to separate at
±10% of their rated break load. If the load rating exceeded, the interior break pin fractures, the swivel separates and the cable undamaged.

Our Price: $128.26
GMP 71408 Breakaway Swivel  5/8"600LB Breakaway Swivel 5/8" 600LB GMP 71408

GMP 71408 Breakaway Swivel 5/8"600LB
Breakaway Swivel 5/8" 600LB GMP 71408. 5/8 in. (15.88 mm) made from Steel. Our Break-away Swivels give you invaluable protection when pulling either fiber optic or coaxial cable.These simple tools provide an inexpensive fracture point between the pulling line and cable avoiding costly cable damage if the cable's rated pulling capacity is exceeded. The 5/8 in. size is extremely convenient when working with innerduct sizes below 1-5/8 in. in diameter. The design of the swivels incorporates a replaceable tension bolt that joins the barrel eye and swivel body. The bolt separates when pulling loads on the cable reach +/-5%. The damaged bolt can then be replaced in seconds using an Allen Breakaway BoltWrench (included) and screwdriver.
SUB - CON 08017200

Our Price: $108.00
GMP 53703 Breakaway Swivel 800LB 7/8" Breakaway Swivel 7/8" 800LB GMP 53703

GMP 53703 Breakaway Swivel 800LB 7/8"
Breakaway Swivel 7/8" 800LB GMP 53703. 7/8 in. (22.23 mm) made from high quality aluminum. Break-Away Swivels provide an inexpensive fracture point between a pulling line & fiber optic cable to protect against costly cable damage if the cable's rated pulling capacity is exceeded. The 7/8" x 4 5/8" body is made of high quality aluminum alloy with a black anodized finish for wear resistance. Steel thrust washers and bushings insure smooth rotation under load and help to keep twisting forces from reaching the cable. Each unit comes with a replaceable color-coded tension bolt. The swivel & bolt are color-coded for identification. The bolt will separate when the pulling load reaches +/-5% of the bolt rating. It can then be replaced using an Allen Wrench (included) & screwdriver.
SUB - CON 08018700


Our Price: $92.00
Replacement Bolt For 5/8" 600 LB Swivel GMP 25493 Replacement Bolt For 5/8" 450 LB Breakaway Swivel GMP 25494

Replacement Bolt For 5/8" 450 LB breakaway swivel GMP 25494.

Our Price: $13.33
Replacement Bolt For 800LB Breakaway 34342 Replacement Bolt For 7/8" 800LB Breakaway Swivel GMP 34342

Replacement bolt for 7/8" 800LB breakaway swivel GMP 34342

Our Price: $11.50
GMP 70137 Heavy Duty Ball Bearing Swivel  5000lb Heavy Duty Ball Bearing Swivel 5000lb GMP 70137

GMP70137 SWIVEL 5000 LBS
4-5/32 LENGTH, SLOT PIN
SWIVEL HEAVY DUTY 17/32
EYE WIDTH, 1-1/4 DIAMETER,

These tough swivels are designed to handle higher thrust loads for extra cable safety and faster straight pulls. These heavy-duty swivels are built with a thrust bearing for tensile load and a radial bearing for bending load.
SUB - CON08080912


Our Price: $165.00
Replacement Bolt for 450 LB Breakaway 25494 Replacement Bolt For 7/8" 450 LB Breakaway Swivel GMP 34786

Replacement bolt for 7/8" 450 LB breakaway swivel GMP 34786.

Our Price: $11.50
GMP 71406 Breakaway Swivel  5/8"450 LB Breakaway Swivel 5/8" 450 LB GMP 71406

Breakaway Swivel 5/8" 450LB GMP 71406. 5/8 in. (15.88 mm) made from Steel. Our Break-away Swivels give you invaluable protection when pulling either fiber optic or coaxial cable.These simple tools provide an inexpensive fracture point between the pulling line and cable avoiding costly cable damage if the cable's rated pulling capacity is exceeded. The 5/8 in. size is extremely convenient when working with innerduct sizes below 1-5/8 in. in diameter. The design of the swivels incorporates a replaceable tension bolt that joins the barrel eye and swivel body. The bolt separates when pulling loads on the cable reach +/-5%. The damaged bolt can then be replaced in seconds using an Allen Breakaway BoltWrench (included) and screwdriver.
SUB - CON 08016900

Our Price: $102.00
Replacement Bolt For 5/8" 600 LB Swivel GMP 25493 Replacement Bolt For 5/8" 600 LB Breakaway Swivel GMP 25493

Replacement Bolt For 5/8" 600 LB breakaway swivel GMP 25493.

Our Price: $11.50
GMP 53701 Breakaway Swivel 7/8" 450 LB Breakaway Swivel 7/8" 450LB GMP 53701

GMP 53701 Breakaway Swivel 7/8" 450 LB

Breakaway Swivel 7/8" 450LB GMP 53701. 7/8 in. (22.23 mm) made from high quality aluminum. Break-away Swivels give you invaluable protection when pulling either fiber optic or coaxial cable. These simple tools provide an inexpensive fracture point between the pulling line and cable avoiding costly cable damage if the cable's rated pulling capacity is exceeded. The design of the swivels incorporates a replaceable tension bolt that joins the barrel eye and swivel body. The bolt separates when pulling loads on the cable reach +/-5%. The damaged bolt can then be replaced in seconds using an Allen Breakaway BoltWrench (included) and screwdriver.
SUB - CON 08015800

Our Price: $92.00
Klein KPS100-2 Double Weave, Rotating-Eye Pulling Grip 1.00-1.24" Double Weave, Rotating-Eye Pulling Grip 1.00-1.24" Klein KPS100-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips ate rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

  • KPS Heavy Duty-Medium Length
  • Cable Diameter Range: 1.00-1.24"
  • Approx. Breaking Strength: 2,560 lbs.
  • Mesh Length: 20"

List Price: $243.22
Our Price: $204.82
SALE Price: $139.85
You save $103.37!
KPS050-2 Double Weave, Rotating-Eye Pulling Grip 0.50-0.61" Klein Double Weave, Rotating-Eye Pulling Grip 0.50-0.61" Klein KPS050-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

  • KPS Heavy Duty-Medium Length
  • Cable Diameter Range: 0.50-0.61"
  • Approx. Breaking Strength: 1,120 lbs.
  • Mesh Length: 16"

List Price: $214.24
Our Price: $160.15
SALE Price: $123.19
You save $91.05!
Klein KPS100-3 Double Weave, Rotating-Eye Pulling Grip 1.00-1.49" Double Weave, Rotating-Eye Pulling Grip 1.00-1.49" Klein KPS100-3

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

  • KPS Heavy Duty-Medium Length
  • Cable Diameter Range: 1.00-1.49"
  • Approx. Breaking Strength: 3,280 lbs.
  • Mesh Length: 33"

List Price: $299.48
Our Price: $223.88
SALE Price: $172.20
You save $127.28!
Klein KPJ100 Junior-Duty Single Weave, Flexible-Eye Pulling Grip 1.00-1.24" Junior-Duty Single Weave, Flexible-Eye Pulling Grip 1.00-1.24" Klein KPJ100

These junior duty, closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Single Weave, Flexible-Eye Pulling Grip

  • Cable Diameter Range: 1.00-1.24"
  • Approx. Breaking Strength: 780 lbs.
  • Mesh Length: 11.5"

List Price: $62.96
Our Price: $62.96
SALE Price: $36.20
You save $26.76!
Klein KPJ75 Junior Duty Single Weave, Flexible-Eye Pulling Grip 0.75-0.99" Junior Duty Single Weave, Flexible-Eye Pulling Grip 0.75-0.99" Klein KPJ75

These junior duty, closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Junior Duty Single Weave, Flexible-Eye Pulling Grip

  • Cable Diameter Range: 0.75"-0.99"
  • Approx. Breaking Strength: 560 lbs.
  • Mesh Length: 10"

List Price: $59.42
Our Price: $44.45
SALE Price: $34.19
You save $25.23!
Klein KPS250-2 Double Weave, Rotating-Eye Pulling Grip 2.50-2.99" Double Weave, Rotating-Eye Pulling Grip 2.50-2.99" Klein KPS250-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

  • KPS Heavy Duty-Medium Length
  • Cable Diameter Range: 2.50-2.99"
  • Approx. Breaking Strength: 6,600 lbs.
  • Mesh Length: 28"

List Price: $388.32
Our Price: $290.29
SALE Price: $223.28
You save $165.04!
Klein KPS150-2 Double Weave, Rotating-Eye Pulling Grip 1.50-1.99" Double Weave, Rotating-Eye Pulling Grip 1.50-1.99" Klein KPS150-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips ate rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

  • KPS Heavy Duty-Medium Length
  • Cable Diameter Range: 1.50-1.99"
  • Approx. Breaking Strength: 3,280 lbs.
  • Mesh Length: 25"

List Price: $290.22
Our Price: $223.88
SALE Price: $166.88
You save $123.34!
Klein KPM050  Double Weave, Flexible-Eye Pulling Grip 0.50-0.61" Double Weave, Flexible-Eye Pulling Grip 0.50-0.61" Klein KPM050

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips ate rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Flexible-Eye Pulling Grip

  • Cable Diameter Range: 0.50-0.61"
  • Approx. Breaking strength: 480 lbs.
  • Mesh Length: 13"

List Price: $112.04
Our Price: $83.75
SALE Price: $64.42
You save $47.62!
Klein KPS062-2  Double Weave, Rotating-Eye Pulling Grip 0.62-0.74" Double Weave, Rotating-Eye Pulling Grip 0.62-0.74" Klein KPS062-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating Eye Pulling Grip

  • KPS Heavy Duty Medium Length
  • Cable Diameter Range: 0.62-0.74"
  • Approx. Breaking Length: 1,360 lbs.
  • Mesh Length: 16"

List Price: $217.46
Our Price: $162.57
SALE Price: $125.04
You save $92.42!
Klein KPS200-2 Double Weave, Rotating-Eye Pulling Grip 2.00-2.49" Double Weave, Rotating-Eye Pulling Grip 2.00-2.49" Klein KPS200-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips ate rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

  • KPS Heavy Duty Medium Length
  • Cable Diameter Range: 2.00-2.49"
  • Approx. Breaking Strength: 5,440 lbs.
  • Mesh Length: 26"

List Price: $338.10
Our Price: $252.75
SALE Price: $194.41
You save $143.69!
Klein KPS350-2  Double Weave, Rotating-Eye Pulling Grip 3.50-3.99" Double Weave, Rotating-Eye Pulling Grip 3.50-3.99" Klein KPS350-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips ate rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grips

  • KPS Heavy Duty-Medium Length
  • Cable Diameter Range: 3.50-3.99"
  • Approx. Breaking Length: 9,600 lbs.
  • Mesh Length; 32"

List Price: $489.66
Our Price: $366.05
SALE Price: $281.56
You save $208.10!
Klein KPS075-2 Double Weave, Rotating-Eye Pulling Grip 0.75-0.99" Double Weave, Rotating-Eye Pulling Grip 0.75-0.99" Klein KPS075-2

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating Eye Pulling Grip

  • KPS Heavy Duty-Medium Length
  • Cable Diameter Range: 0.75-0.99"
  • Approx. Breaking Strength: 1,360 lbs.
  • Mesh Length: 20"

List Price: $241.60
Our Price: $180.62
SALE Price: $138.92
You save $102.68!
Klein KSRK075-1 Slack-Pulling, Offset Flexible Eye Pulling Split Grip 0.75-0.99" Slack-Pulling, Offset Flexible Eye Pulling Split Grip 0.75-0.99" Klein KSRK075-1

Split Mesh pulling-grips are used for pulling overhead or underground cable, stringing service or communication
lines into buildings, pulling wire through conduit,
and general underground construction.
Slack-Pulling, Offset Flexible Eye Pulling Grip

  • KSRK Light Duty-standard Length
  • Cable Diameter Range: 0.75-0.99"
  • Approx. Breaking Strength: 480 lbs.
  • Mesh Length: 12"
  • Split Grip mesh pulling Grip

List Price: $79.42
Our Price: $59.37
SALE Price: $45.67
You save $33.75!
Lewis HD-0 Ball Bearing Swivel 5400LB Ball Bearing Swivel 5400LB Lewis HD-0

Heavy Duty Ball Bearing Swivels are available in Models HD-00, HD-0, HD-1, HD-2, HD-3 and HD-4.

Each model is different in size, specifications and ratings; but they all have the same basic design. They are specifically designed for tension stringing, and assure that conductor will remain in the neutral position during stringing of transmission or distribution lines.

These twin race ball bearing swivels are manufactured from high-grade pre-stressed steel. Proper placement of thrust and radial bearing allow thrust and shock loads to be absorbed without affecting rotation of swivel. Pins are screwdriver removable.

Our Price: $201.66
Lewis SEG-3 Swivel Eye Grip 1.5"- 2.0" 11,200LBS Swivel Eye Grip 1.5"- 2.0" 11,200LBS Lewis SEG-3

Swivel Eye Pulling Grip - Lewis SEG-3
Swivel Eye Grips are available with hardened steel rotating eyes. The eyes are durable, compact, and streamlined and will thread through blocks and sheaves without binding. The rotating eye is not a ball bearing swivel and will not turn under tension.
Mesh length 48" Size Range: 1.5" - 2.0" Working load 11,200 lbs..

Our Price: $193.92
   
 
1 2