Gulfstream 400 Fiber Optic Cable Blower Package 1A
(includes Cable Packs # 1-4, and Duct Packs #2-5)

Extremely easy to transport, the blower and all accessories
conveniently fit into a lightweight job box with wheels.

Designed for the installation of fiber optic cables with diameters from
0.23" (5.8 mm) to 1.13" (28.7 mm) into microduct.
Order Duct and Cable Packs separately, to ensure the
correct size for your needs.

Key Facts:

Condux 08785000 Mobiliar M17 Air Compressor with Aftercooler / Air Conditioner, with 220psi 35cfm is a rugged and dependable unit that is perfect for variety of applications with a folding handle, oversized pneumatic tires, and compact compact design, this unit is easy to move around virtually any job-site. The M17 features Kaeser's power saving Sigma Profile airend. This efficient Kaeser design maintains steady pressure and puts out more air per hp, saving you gas. Driving these airend is a quiet but powerful Honda engine with modulation control which matches air output to the load demand. It has a simple electric starter electric starter with keyed ignition and an easy-to-read control panel. The scratch, dent and impact resistant rotomolded polyethylene shell takes a beating and protects the unit. Inside, the compressor are protected by 4 micron inlet filters rated at 99.9% efficiency, allowing this unit to operate in virtually any environment
Features:
• Single stage, oil injected rotary screw airend with power-saving proprietary Sigma Profile

• 4-cycle, V-twin industrial duty Honda engine

• Engine rated 21 hp

• Uses lead-free gasoline

• Compressor and engine are disengaged for easy starting, even in cold conditions

• Convenient one-touch electric start

• Belt-driven with a three-groove power band

• Control panel displays pressure and hour meter

• Protective rotomolded polyethylene enclosure

• Vibration isolation for smooth, quiet operation

• 4 micron air intake filters protect the airend

After-cooler cools the air and removes the moisture from the air lines

Install fibre optic cable ranging from 3mm to 10mm into duct from 7mm to 18mm. The GS300
offers portability, convenience and power in a cost effective package. Features user-friendly
controls that optimize installation.

The 250CFM Compressor Aftercooler has been designed to cool compressed air and remove water droplets prior to entering a GMP Cable Blowing Machine.Features a heavy-duty moisture separator and coalescing filter to trap moisture and condensed oil.

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. ???
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. 08780930
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780375
• Duct Seal - Part No. 08780051
• Carrier - Part No. 08761255
• Foam Carrier - Part No. 08761440
• Cable Grip - Part No. 08643149
• Innerduct Eye - Part No. 08761842

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. 08780930
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. 08780930
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. 08780930
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. 08780930
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. 08780930
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. 08780930
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. ???
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. ???
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. ???
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780404
• Duct Seal - Part No. 08780398
• Carrier - Part No. 08761260
• Foam Carrier - Part No. 08761441
• Cable Grip - Part No. 08643149
• Innerduct Eye - Part No. 08761844

Each duct pack comes with:

• Duct Clamp - Part No. 08780369
• Duct Seal - Part No. 08780307
• Carrier - Part No. 08761250
• Foam Carrier - Part No. 08761439
• Cable Grip - Part No. 08643137
• Innerduct Eye - Part No. 08761842

Each duct pack comes with:

• Duct Clamp - Part No. 08780682
• Duct Seal - Part No. 08780685
• Carrier - Part No. 08780690
• Foam Carrier - Part No. 08078300
• Cable Grip - Part No. 08643137
• Innerduct Eye - Part No. 08761840

Each duct pack comes with:

• Duct Clamp - Part No. 08780791
• Duct Seal - Part No. 08780786
• Carrier - Part No. 08780793
• Foam Carrier - Part No. 08078300
• Cable Grip - Part No. 08643131
• Innerduct Eye - Part No. 08761840

CONDUX 08764130 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher

CONDUX 08764140 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher

Duct Size OD (mm):10mm
Innerduct Eye ID Range:5-9mm

Includes

CONDUX 08764150 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher

Duct Size OD (mm):12.7mm

CONDUX 08764110 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher

Condux 08764143 Seal, Inner-Duct
Duct OD: 0.39" (10mm)

Clamp, Inner-Duct
Duct OD: 0.39" (10mm)

Condux 08033488 3/4-10 USC Thread 9/16" Duct Rodder Accessory Kit
Includes:

• Canvas Bag,
• Roller Guide
• Splice Kit
• Epoxy
• Swivel Coupling
• Tapered Head
• Thread End Fittings

Condux 08033497 3/8-16 USC Thread 5/16" Duct Rodder Accessory Kit
Includes:

• Canvas Bag,
• Roller Guide
• Splice Kit
• Epoxy
• Swivel Coupling
• Tapered Head
• Thread End Fittings

Condux 08033494 3/8-16 USC Thread 7/16" Duct Rodder Accessory Kit
Includes:

• Canvas Bag,
• Roller Guide
• Splice Kit
• Epoxy
• Swivel Coupling
• Tapered Head
• Thread End Fittings

Box includes:

• Push-On Retainers
• Disc Carriers
• Loctite
• Calipers

Condux 08676861, Speed Ball Insert Innerduct Split Coupling 1.50"

Used for temporary joining all types of innerduct during the cable blowing process.

*One Insert Set includes Rubber Seal*

Specification:

• Nominal Duct Size: 1.50" (38 mm)
• Duct Type: 1-1/2" SDR 11, 13.5
• Mean Duct OD: 19.00" (48 mm)

Condux 02290222, Black Molded Case with foam insert for Fiber Optic Cable Blower and/or Insertion gun.

Condux 08676862, Speed Ball Insert Innerduct Split Coupling 2.00"

Used for temporary joining all types of innerduct during the cable blowing process.

*One Insert Set includes Rubber Seal*

Specifications:

• Nominal Duct Size: 2.00" (61 mm)
• Duct Type: 2.00" SDR 11, 13.5
• Mean Duct OD: 2.375" (60 mm)

Condux 08676860, Speed Ball Insert Innerduct Split Coupling 1.25"

Used for temporary joining all types of innerduct during the cable blowing process.

*One Insert Set includes Rubber Seal*

Specifications:

• Nominal Duct Size: 1.25" (32 mm)
• Duct Type: 1 1/4" SDR 11, 13.5
• Mean Duct OD: 1.660" (42 mm)

Condux 08037534 Flexible Leader for 9/16" rod, helps guide the duct rod around bends, sweeps, and duct misalignment.
Specifications:
Rod Diameter: 9/16"
USC Thread: 3/4-10 Thread 24" Long

Condux 08676859, Speed Ball Insert Innerduct Split Coupling 1.00",

Used for temporary joining all types of innerduct during the cable blowing process.

*One Insert Set includes Rubber Seal*

Specifications:

• Nominal Size: 1.00" (25 mm)
• Duct Type: 1" SDR 11 & 13.5
• Mean Duct OD: 1.315" (33 mm)

Condux 08676863, Speed Ball Insert Innerduct Split Coupling 40mm

Used for temporary joining all types of innerduct during the cable blowing process.

*One Insert Set includes Rubber Seal*

Specification:

• Nominal Duct Size: 1.575" (40 mm)
• Duct Type: 40 mm
• Mean Duct OD: 1.575" (40 mm)

Condux 08037538 Flexible Leader for 3/8" rod, helps guide the duct rod around bends, sweeps, and duct misalignment.
Specifications:
Rod Diameter: 3/8"
USC Thread: 3/8-16 Thread 24" Long

Condux 08761426 Cable Seals 0.49" - 0.55" , replacement cable seals  for Condux Fiber-Optic Cable Blowers are sold in packs of four. These cable seals are compatible with the according cable venturi for the HD Blowers, Deluxe Lightweight Blower, and Mini-Blower/Pusher.

Condux 08761425 Cable Seals 0.43" - 0.48", replacement cable seals for Condux FIber-Optic Cable blowers are sold in
packs of four.These seals are compatible with the according cable venturi for the HD Blowers, Deluxe Lightweight Blower, and Mini Blower/Pusher.

Cable seal for Condux GS-400 (Gulfstream) Fiber Optic Cable Blower.
Cable OD: 0.23"-0.28" (7.3-8.8)

Cable seal for Condux GS-400 (Gulfstream) Fiber Optic Cable Blower.
Cable OD: 0.29"-0.34" (7.3-8.8)

Condux 08037401 Roller Guide
The Roller Guide helps guide the duct rod around bends, sweeps, and duct misalignments. Also used when the conduit is already
occupied by other cables.
Specifications:

• US Duct Rod Diameter: 7/16"
• USC Thread: 3/8" - 16"
• Duct Range ID: 2.5-6"

Condux 08035752 5/16" Roller Guide, helps guide the duct rod around bends, sweeps, and duct misalignment. also used when the conduit is already occupied by cables.
Specifications:

• US Duct Rodder Diameter: 1/4"
• USC Thread: 5/16-18
• Duct Range ID: 1.00 - 2.50"

CONDUX 08780126 O-Ring Seal Kit for Gulfstream™ 400

Condux 08780223 Venturi Air Plug Seal Disk, blocks the the backward flow of air on the Condux Fiber-Optic Cable Blower while the user is conducting pressure tests and/or applying pre-lubricant in duct. The Seal disk is also used in conjunction with the Winch Line Blower when installing polyester pull tape.