You are here: Home > Pole Line Hardware > Anchors and Rods > NO WRENCH SCREW ANCHORS
We found 9 results matching your criteria.
NO WRENCH SCREW ANCHORS
Sort By:
1
No Wrench Screw Anchor 3/4" X 66" J6526WCA No Wrench Screw Anchor 3/4" X 66" With 6" Helix J6526WCA

Used for guying wires at utility poles. Anchors are installed by simply turning anchor into ground. No Wrench Anchors may be driven by hand or with power equipment. Eye dimensions are the same as Anchor Rods. Screw anchors consist of an unthreaded triple eye rod with an angled point, and a firmly welded helix. 8" - Wrench anchor into drive head tool and secure. Helix is 1/4" thick. Hot dip galvanized to meet ASTM Specification A153, Class C. helix anchor, twist anchor, screw anchor.

Our Price: $51.87
No-Wrench Screw Anchor 1" X 66" J6528WCA No Wrench Screw Anchor 1" X 66" With 8" Helix J6528WCA

Used for guying wires at utility poles. Anchors are installed by simply turning anchor into ground. No Wrench Anchors may be driven by hand or with power equipment. Eye dimensions are the same as Anchor Rods. Screw anchors consist of an unthreaded triple eye rod with an angled point, and a firmly welded helix. 8" - Wrench anchor into drive head tool and secure. Helix is 1/4" thick. Hot dip galvanized to meet ASTM Specification A153, Class C. helix anchor, twist anchor, screw anchor.

Our Price: $72.71
No-Wrench Screw Anchor 1 1/4" X 66" J6530WCA No Wrench Screw Anchor 1 1/4" X 66" With 10" Helix J6530WCA

Used for guying wires at utility poles. Anchors are installed by simply turning anchor into ground. No Wrench Anchors may be driven by hand or with power equipment. Eye dimensions are the same as Anchor Rods. Screw anchors consist of an unthreaded triple eye rod with an angled point, and a firmly welded helix. Insert No - Wrench anchor into drive head tool and secure. Helix is 1/4" thick. Hot dip galvanized to meet ASTM Specification A153, Class C. Helix anchor, twist anchor, screw anchor.

Our Price: $118.50
SALE Price: $92.17
You save $26.33!
Little Beaver 30272 Adaptor, with Hardware, Keyed Shaft to Auger MANTA LB 30272 Little Beaver Adaptor Keyed Shaft to Auger w/Hardware for Groundhog Augers

Little Beaver Adaptor, with Hardware, Keyed Shft to Auger


Earth Drills

Our Price: $96.75
Little Beaver 9051-GHLB Adaptor with 7/8" Square Drive for Groundhog Augers MANTA 9051-GHLB Little Beaver Adaptor with 7/8" Square Drive for Groundhog Augers

This adaptor adapts Little Beaver earth drills to Groundhog brands of augers. Features a 7/8" square drive connection.

Earth Drills

Our Price: $113.50
MANTA LB-30322 Little Beaver Utility Anchor Adaptor (Fits into #30272) MANTA LB-30322 Little Beaver Utility Anchor Adaptor (Fits into #30272)

Driving utility anchors is made easier with this special adaptor. With Little Beaver’s anchor handle, hydraulic earth drill and torque tube, one-man installation of utility anchors is now possible. (60 RPM only)

Our Price: $120.00
Hubbell 402 Anchor, No Wrench, Extension, x 72in Tripleye Triple Eye Forged Extension for No Wrench Anchor 1-1/4" x 72" Hubbell 402

Anchor, No Wrench, Extension, x 72in Tripleye

No-Wrench Extension 6' (1829 mm) long Tripleye.
  • The 402 anchor rod extension is used with during installation of No-Wrench anchors to allow the anchor to be driven to greater depth to reach firmer soil.
  • Hot dipped galvanized per ASTM A153

Our Price: $132.27
No Wrench Screw Anchor 1.25X96" J6550WCA No Wrench Screw Anchor 1.25" X 96" With 10" Helix J6550WCA

Used for guying wires at utility poles. Anchors are installed by simply turning anchor into ground. No Wrench Anchors may be driven by hand or with power equipment. Eye dimensions are the same as Anchor Rods. Screw anchors consist of an unthreaded triple eye rod with an angled point, and a firmly welded helix. 10" - Wrench anchor into drive head tool and secure. Helix is 1/4" thick. Hot dip galvanized to meet ASTM Specification A153, Class C. helix anchor, twist anchor, screw anchor.

Our Price: $142.27
Anchor, Tool, No Wrench Anchor Hubbell E3030255 *Anchor, Tool, No Wrench Anchor Hubbell E3030255

Especially designed for use with the Chance portable anchor installer. This tool bolts directly to the installer's output flange or Kelly bar adapter having six 1/2" dia. holes on a 5-1/4" bolt circle. Adjustable pivoting plates accept rods from 3/4" to 1-1/4" diameter.

For manually-installed foundations, eyenut must be temporarily installed for installation. Has four holes on 5-1/4" bolt circle for attachment. Includes four 1/2" x 1-1/2" bolts, nuts and lockwashers.

Our Price: $1,252.74
   
 
1