• For 1/4" Strand
• A heavy duty means of securing down guys and wire rope.
  
• Comprised of a Malleable Iron base, “U” bolt, and two hex nuts.
  
• All components are hot dip galvanized to meet ASTM Specification A153.

• For 5/16 Strand
• A heavy duty means of securing down guys and wire rope.
  
• Comprised of a Malleable Iron base, “U” bolt, and two hex nuts.
  
• All components are hot dip galvanized to meet ASTM Specification A153.

Thimble Open, ADSS Drope Cable Dead-Ends 1/2 in; Opening Width - 3/4 in; Eye Width - 1 1/8 in; Eye Length - 2 in; Material - Steel, Plated

THIMBLE OPEN 1/2 Guy Strand J1058

• for 3/8 strand
• A heavy duty means of securing down guys and wire rope.
  
• Comprised of a Malleable Iron base, “U” bolt, and two hex nuts.
  
• All components are hot dip galvanized to meet ASTM Specification A153.

H-4069 Crossover Clamp for 1/4" Strand

• Used in aerial construction at the mid-span to clamp two 1/4" strands together perpendicularly
• Crossover plates are tapped to eliminate the handling of loose nuts
• Stamped from AISI 1008 Steel

Used in guying applications to form an oval wire eye for securing to eye-bolts and guy rods.

• Thimble, Wire Rope: Type - Guy Open Wire Rope
• Strand Diameter - 3/8 in
• Opening Width - 5/8 in
• Eye Width - 7/8 in
• Eye Length - 1 7/8 in
• Material - Steel, Hot Dipped Galvanized
• Weight - 8.80 lb/100.

• Used to form guy loops that attach to anchor rods or dead-ends.
• Parallel grooves accept strand without marring.
• Plate halves align evenly for ease of installation.
• Plate length is 3-3/8" and plate width is 1-9/16".
• Strand sizes accommodated are 3/16" (2.2 M) -3/8" (10 M).
• Comprised of two plates and two 1/2" X 1-5/8" Carriage Bolts with Regular Square Nuts.
• Hot dip galvanized to meet ASTM Specification A153.
• H-J1030-ALL-5058
• This is not a suspension clamp

For connecting ribbon or braid to ribbon, braid or bus.
Side Opening Jaw facilitates easy installation.

MSI H-J931 3 Bolt Marriage Guy Clamp 6", 5/16" - 1/2" Strand Range
3 Bolt Clamp Marriage Guy Clamp

Specifications/Features:

• Number of Bolts: 3
• Clamp Bolt Diameter: 5/8"
• Clamp Length: 6"
• Clamp Width: 1-21/32"
• Strand Diameter: 5/16" - 1/2"
• Rolled from carbon steel with straight parallel groove that will not damage strand
• The clamping bolts have special shoulders to prevent turning when the nuts are tightening
• Construct of high quality steel, hot-dip galvanized

Not to be used as a suspension clamp. Can also be used with the SideWalk Guy Clamp End J0522

MSI H-J929 3 Bolt Marriage Guy Clamp 4"with 1/2" Bolts, 3/16" - 7/16" Strand Range
3 Bolt Clamp Marriage Guy Clamp
Specifications/Features:

• Number of Bolts: 3
• Clamp Bolt Diameter: 1/2"
• Clamp Length: 4"
• Clamp Width: 1-9/16"
• Strand Diameter: 3/16" - 7/16"
• Rolled from carbon steel with straight parallel groove that will not damage strand
• The clamping bolts have special shoulders to prevent turning when the nuts are tightening
• Construct of high quality steel, hot-dip galvanized

Provides a 12 inch clearance from the pole and is fastened with two 5/8 inch mounting bolts. Clamp plates are reversible to accept a wide range of messenger diameters.

• Hot dip Glavanisex Ductile Iron