THIMBLE OPEN 3/8 Guy Strand J1057
Thimble, Wire Rope: Type - Guy Open Wire Rope; Strand Diameter - 3/8 in; Opening Width - 5/8 in; Eye Width - 7/8 in; Eye Length - 1 7/8 in; Material - Steel, Hot Dipped Galvanized; Weight - 8.80 lb/100.
THIMBLE OPEN 3/8 Guy Strand J1057
List Price: $1.50
Our Price: $1.50
SALE Price: $1.31
You save $0.19!
THIMBLE OPEN 1/2 Guy Strand J1058
Thimble, Wire Rope: Type - Guy Open Wire Rope; Strand Diameter - 1/2 in; Opening Width - 3/4 in; Eye Width - 1 1/8 in; Eye Length - 2 in; Material - Steel, Hot Dipped Galvanized; Weight - 18.40 lb/100
THIMBLE OPEN 1/2 Guy Strand J1058
List Price: $1.56
Our Price: $1.56
SALE Price: $1.36
You save $0.20!
Thimble Clevis 5/8" H-J555
Formed steel thimble clevis provides a light duty, economical interface fitting to
deadend wire grips, guy wire, conductor or bails to eye type fittings of insulators,
eyebolts and pole eye plates. Used where 1-1⁄2" wire seat diameters are required.
Constructed of pressed high quality steel, hot-dip galvanized.
DEADEND Thimble Clevis 5/8" H-J555
Thimble Clevis Preformed TC-5F
THIMBLE CLEVIS GALVANIZED DUCTILE IRON for E-1 LINK
Thimble Clevises are used in conjunction with PREFORMED
Dead-ends on suspension-type or Dead-end insulators. The thimble is
intended to provide a smooth internal contour to prevent stress
concentration within the loop of a PREFORMED Dead-end. The 15/16" inside width Clevis
includes a 2-15/16 x 5/8 steel pin which links it through the eye of an insulator and
secures it with a humpbacked cotter key. 26,900 Lbs
ANCHOR SHACKLE PLPAS-5L
This anchor shackle can be connected to eye bolt on the structure. 1/2" (13mm) shackle 7/8 INSIDE WIDE 5/8 PIN
3.5" INSIDE LENGTH
Clevis Eye, 3/4" Eye Thickness, 20K Strength H-PLP CE-5261
H-PLP CE-5261 Clevis Eye 20,000 LBF. Strength
- Body: Ductile Iron, Hot Dip Galvanized
- Hardware: Galvanized Steel
- Cotter Pin: Stainless Steel
Conductor Diameter Range: - Minimum: .751"
- Maximum: 1.005"
General Dimensions:
- (A): 7/16" (11.2 mm)q
- (B): 1-1/2" (38.1 mm)
- Wide Clevis (C): 13/16" (20.6 mm)
- Eye Thickness (D): 3/4" (19.1 mm)
- Hole Dia. (E): 11/16" (17.5 mm)
- (F): 1-1/2" (38.1 mm)
- Center to Center (L): 3-1/8" (79.4 mm)
- Pin Diameter: 5/8" (16 mm)
- Vertical Ultimate Strength lbf. (KN): 20,000 lbf (84)
H-PLP CE-5259 Clevis Eye, 1/2" Eye Thickness, 15K Strength
H-PLP CE-5259 Clevis Eye 15,000 LBF. Strength
- Body: Ductile Iron, Hot Dip Galvanized
- Hardware: Galvanized Steel
- Cotter Pin: Stainless Steel
Conductor Diameter Range: - Minimum: .272"
- Maximum: .750"
General Dimensions: - (A): 7/16" (11.2 mm)
- (B): 1-1/2" (38.1 mm)
- Wide Clevis (C): 13/16" (20.6 mm)
- Eye Thickness (D): 1/2" (17.5 mm)
- Hole Dia. (E): 11/16" (17.5 mm)
- (F): 1-1/2" (38.1 mm)
- Center to Center (L): 3-1/8" (79.4 mm)
- Pin Diameter: 5/8" (16 mm)
- Overall Length: 4-5/8"
- Vertical Ultimate Strength lbf. (KN): 15,000 lbf (47)
ANCHOR SHACKLE " RAIN MAKER" H-ASH-55
ANCHOR SHACKLE "RAIN MAKER"
30K ULTIMATE STRENGTH
FOR 5/8"
ASH-55 30000 lb 2 3/4 long inside
5/8 diameter 7/8 opening 5/8 Dia pin 1 1/2 lug size
Material:
- Shackle - Forged Steel , Hot Dip Galvanized
- Hardware - Stainless Steel
Y CLEVIS HUBBELL YCS05
HUB YCS05 Y-Clevis Eye, Ductile Iron, 0.750" Curved Bolt, Eye: 0.625" with 0.688" Hole, UTS 20,000 lb
Y-clevis eyes are primarily used to attach clamping devices to yoke plates or other associated hardware in a bundle conductor assembly. The bent bolt in the Y-section provides an additional point of articulation within an assembly.
B Lifting Shackle GMP 07560
Allows attachment of a chain hoist to lashed aerial cable for lifting. A flat steel shackle fits between....
