You are here: Home > Datacom-Telecom > PUNCHDOWN TOOLS
We found 5 results matching your criteria.
Punchdown Tools
Sort By:
1
Fluke Network TS19 19800009 Telephone Test Set Fluke Network TS19 19800009 Telephone Test Set

Fluke Network TS19 19800009 Telephone Test Set
The Fluke Networks TS19 Test Set combines all the essential test set features at an affordable price. This test set was specifically designed for in-house telecom technicians. Its high impedance monitor prevents accidental disruption of service from clipping onto a data line while in monitor mode, thus ensuring the integrity of critical data lines. Features such as tone (DTMF) or pulse operation, talk/monitor capabilities, polarity test button and last number redial make this test set the perfect combination of features and price.
Specifications:

  • Loop Limit: 2.4 KO Maximum at 48 VDC (nominal 15 mA minimum loop current)
  • DC Resistance ( Talk Mode) : 150 O typical at 80 MA current
  • AC Impedance ( Monitor Mode) : Low Impedance (ring position) 600 at 1 KHz
  • Rotary Dial Output: 10 pps. 5 pps
  • Pulsing Rate: 60% + 2%
  • Percent Break: 800 ms typical
  • Interdigit Internal Leakage during break: 50 KO
  • DTMF Output: +1% maximum
  • Tone Frequency Error Level per tone pair: dbm maximum - dbm maximum
  • High versus low tone difference: 4 db maximum
  • Length: 8.75" (22.2cm)
  • Width: 2.375" (6.03cm)
  • Height: 3.375" (8.57cm)
Features:
  • The LED indicates polarity
  • The red lights if the red test lead is connected to the tip (positive) side and black test lead is connected to the ring (negative) side.
Test Services:
  • Monitoring
  • Polarity Check
  • Pulse/Tone Dialing
  • Short Circuit
  • Continuity
Environmental Temperature:
  • Operating: -5 °C to °C
  • Storage: -40 °C to °C
Drop:
  • 1 meter, 4 times
Altitude:
  • To 3,000 meters (10,000') maximum
Relative Humidity:
  • 10% - 80% (non-condensing)

Our Price: $135.00
Punchdown Tool Kit JONARD TK-17 Punchdown Tool Kit JONARD TK-17

Punchdown Tool Kit JONARD TK-17

A technician's Service Kit designed for maintaining telecommunications and data communications networks.

Kit Contains:

  • EPD-914 Punchdown Tool
  • 66 Blade with & without cutter
  • 110 Blade with & without cutter
  • CST-1i Cyclops UTP/STP Cable Stripper
  • FL-2000 LED Flashlight with Zoom Lens
  • JIC-22035 Probe Pick Spudger
  • JIC-22148 Combo Crimper Long Nose Plier
  • SD-61 6-In-1 Screwdriver
  • ES-1964ERG Ergonomic Electrician Scissor
  • H-75 Molded Pouch.

Our Price: $125.23
Fluke Network JR-LEV-1 JackRapid Punch Down Tool Fluke Network JR-LEV-1 JackRapid Punch Down Tool

The Fluke Networks JR-LEV-1 JackRapid Punch Down Tool is a cable termination tool that is designed to give technicians maximal efficiency in cable maintenance. The JackRapid terminates jacks 8 times faster than normal tools by seating and terminating all wires at once with a simple handle squeeze. The JackRapids built-in blade cuts off excess wire, eliminating a secondary trim step. This device is designed in such a way that allows users make terminations in cramped spaces. Although the format of the JackRapid termination tool is designed to deal mainly with LEVITON 41106, 41108 and 5G108 ends it sports a replaceable blade head for use with other types of jacks.

Our Price: $90.00
Klein VDV427-806 Punchdown Multi-Tool with 110/66 Blade Punchdown Tool Klein VDV427-806 Multi-Tool with 1/66 Blade-discontinued-1 in stock 1/16/19

The Punchdown Multi-Tool with 110/66 blade terminates and cuts wire in one convenient step. It is spring-loaded for fast low effort seating and terminating. The included precision ground combination 66 and 110 blade and the variety of optional WorkEnds™ driver bits provide flexibility. The cut side is color coded yellow for identification.

  • Patent pending locking impact mechanism allows non-impact operation and sure driving with a variety of optional WorkEnds driver bits.
  • Terminate and cut wire in one step with included precision ground combination 66 and 110 blade.
  • Integrated Hook and Spudger for fast, easy manipulation of wire and small components.
  • Selectable (hi/low) impact-force settings meet industry standards.
  • Spring loaded for fast low effort seating and terminating.
  • Dual material contoured chassis provides greater control and enhances comfort.
  • Color coded yellow on the CUT side of the tool.
  • Hook and Spudger neatly and compactly store in the shassis, out of the way when not in use.
  • Induction hardened high-carbon steel for durability and long life.
  • Replacement blades and optional WorkEnds kit available.
  • Blade storage compartment with spring loaded locking mechanism.


List Price: $70.54
Our Price: $70.54
SALE Price: $46.56
You save $23.98!
Punchdown Tool W/ 66 & 110 Combo Blade JONARD EPD-914116 Punchdown Tool W/ 66 & 110 Combo Blade JONARD EPD-914116

Punchdown Tool W/ 66 & 110 Combo Blade JONARD EPD-914116

Punchdown Tool with Combination Blade 66 & 110.Sleek ergonomic design for easy effective wire termination. Tested up to 100,000 cycles at high-impact setting.

Features include:

  • Hi/Low impact setting
  • Combination Hook/Spudger stored in the chassis
  • Color coded yellow on the CUT side
  • Enlarged blade storage compartment
  • Lifetime Warranty (Essentially means unlimited impacts)

Use to properly set, seat and terminate wire. Simply position the wire, push tool, and listen for confirming pop. Wire is properly seated.

Our Price: $31.62
   
 
1