Designed for use on communication and pedestal boxes, this booth wrench is perfect for opening 5/32” hex tamper-proof fasteners. This booth wrench features the following:

• Heat treated carbon steel for maximum durability
• Extra long 6” shaft and 9” overall length for greater reach

Designed for use on communication and pedestal boxes, this booth wrench is perfect for opening 5/32” hex tamper-proof fasteners. This booth wrench features the following:

• Heat treated carbon steel for maximum durability
• 6” overall length for easy portability and storage

Designed for use on 7/16” F connectors, nuts, and bolts, this combination wrench makes tightening and loosening quick and easy. This combination wrench features the following:

• Ratcheting box-end has a 15° angled head to keep hands away from work
• Ratcheting box-end also offers 12 points of contact to provide maximum torque
• Wrench-end has a 15° offset to allow easy access to connectors, nuts, and bolts
• Made of chrome plated chrome vanadium steel for maximum strength and durability

Designed for use on 7/16” F connectors, nuts, and bolts, this patented angled speed wrench makes tightening and loosening quick and easy.
This speed wrench features the following:

• Patented 15° angled speed head allows easy access to connectors, nuts, and bolts
• Double-ended design allows one end of the wrench to tighten while the other can loosen
• Made of chrome plated vanadium steel for maximum strength and durability
• Belt loop hole for convenient storage and transportation

Designed for use on 1/2” connectors, nuts, and bolts, this patented angled speed wrench makes tightening and loosening quick and easy.

This speed wrench features the following:

• Patented 15° angled speed head allows easy access to connectors, nuts, and bolts
• Double-ended design allows one end of the wrench to tighten while the other can loosen
• Made of chrome plated vanadium steel for maximum strength and durability
• Belt loop hole for convenient storage and transportation

Designed to fit over long binding posts, this can wrench is the perfect tool for opening telephone box fasteners and tightening nuts on binding-post terminals.
This tool features the following:

• Hex shape on outside of sockets can be used with a wrench to maximize torque
• 7/8” diameter impact-resistant thermoplastic handle is ergonomically designed and color-coded orange
• Thin-walled sockets access tight spaces such as locking devices on terminals and cabinets
• Total length is 7” with 1 1/4” (31.75 mm) deep sockets to fit over long binding posts
• Heat treated alloy steel sockets provide long life and durability

Designed for use on 1/2” connectors, nuts, and bolts, this patented ratcheting speed wrench makes tightening and loosening quick and easy.
This speed wrench features the following:

• Patented speed head allows easy access to connectors, nuts, and bolts
• Ratcheting box-end has 12 points of contact to provide maximum torque
• Made of chrome plated vanadium steel for maximum strength and durability
• Belt loop hole for convenient storage and transportation

Designed for use on 7/16” F connectors, nuts, and bolts, this patented ratcheting speed wrench makes tightening and loosening quick and easy.
This speed wrench features the following:

• Patented speed head allows easy access to connectors, nuts, and bolts
• Ratcheting box-end has 12 points of contact to provide maximum torque
• Made of chrome plated vanadium steel for maximum strength and durability
• Belt loop hole for convenient storage and transportation

Jonard's adjustable wrenches are made of chrome vanadium steel with a chrome plated finish. They are forged and heat treated for maximum strength.
Our adjustable wrenches feature the following:

• Precision formed knurled worm gear for smooth operation
• Extra wide jaw capacity makes this wrench ideal for bigger jobs
• Ergonomically designed vinyl-dipped wide handles for greater comfort
• English and Metric scales on each side of the wrench to allow for faster adjustments
• This product complies with ASME B107.8-2003 and ASNI standards

Designed to fit over long binding posts, this can wrench is the perfect tool for opening telephone box fasteners and tightening nuts on binding-post terminals.
This tool features the following:

• Built-in wire stripper has a slot for stripping the outside jacket of four wire "quad" cables and another for 22 AWG wire
• Hex shape on outside of sockets can be used with a wrench to maximize torque
• 7/8” diameter impact-resistant thermoplastic handle is ergonomically designed and color-coded orange
• Thin-walled sockets access tight spaces such as locking devices on terminals and cabinets
• Total length is 7” with 1 1/4” (32 mm) deep sockets to fit over long binding posts
• Heat treated alloy steel sockets provide long life and durability

Jonard's adjustable wrenches are made of chrome vanadium steel with a chrome plated finish. They are forged and heat treated for maximum strength.
Our adjustable wrenches feature the following:

• Precision formed knurled worm gear for smooth operation
• Extra wide jaw capacity makes this wrench ideal for bigger jobs
• Ergonomically designed vinyl-dipped wide handles for greater comfort
• English and Metric scales on each side of the wrench to allow for faster adjustments
• This product complies with ASME B107.8-2003 and ASNI standards

Designed for 7/16" F Connectors, this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening.
This torque wrench features the following:

• Provides a snug fit when used on 7/16" F Connectors
• Ergonomically designed with an angled head and cushion grip for maximum leverage and comfort
• Calibrated to 20 in-lb (2.26 N-m) to consistently meet most manufacturers' recommended torque requirements for their F Connectors
• Audible click lets you know when the connector is fully torqued to 20 in-lb
• Made of High Carbon Steel with a Black Oxide finish for maximum durability
• Lifetime Warranty

Designed for 7/16" F Connectors, this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening.
This torque wrench features the following:

• Provides a snug fit when used on 7/16" F Connectors and can also be used on bonding hardware
• Ergonomically designed with an angled head and cushion grip for maximum leverage and comfort
• Calibrated to 40 in-lb (4.52 N-m) to consistently meet most manufacturers' recommended torque requirements for their F Connectors
• Audible click lets you know when the connector is fully torqued to 40 in-lb
• Made of High Carbon Steel with a Black Oxide finish for maximum durability
• Lifetime Warranty

Designed to fit over long binding posts, this can wrench is the perfect tool for opening telephone box fasteners and tightening nuts on binding-post terminals.
This tool features the following:

• Built-in wire stripper with two slots: one for stripping the outside jacket of four wire "quad" cables and the other for 22 AWG wire
• Security key insert (SK-51632) has a double-ended hex adapter for 5/16” and 5/32” pin-in-head security fasteners
• Hex shape on outside of sockets can be used with a wrench to maximize torque
• 7/8” diameter impact-resistant thermoplastic handle is ergonomically designed and color-coded orange
• Thin-walled sockets access tight spaces such as locking devices on terminals and cabinets
• Total length is 7” with 1 1/4” (32 mm) deep sockets to fit over long binding posts
• Heat treated alloy steel sockets provide long life and durability

Designed for 7/16" F Connectors, this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening.
This torque wrench features the following:

• Provides a snug fit when used on 7/16" F Connectors
• Ergonomically designed with an angled head and cushion grip for maximum leverage and comfort
• Calibrated to 30 in-lb (3.39 N-m) to consistently meet most manufacturers' recommended torque requirements for their F Connectors
• Audible click lets you know when the connector is fully torqued to 30 in-lb
• Made of High Carbon Steel with a Black Oxide finish for maximum durability
• Lifetime Warranty

Designed for 7/16" F connectors, this speed head torque wrench skips over the corners of nuts and bolts so no repositioning of the tool is required.
This torque wrench features the following:

• Provides a snug fit when used on 7/16" F Connectors
• Acts like a ratcheting wrench to allow continuous turning of nuts and bolts
• Ergonomically designed with an angled head and cushioned grip for maximum leverage and comfort
• Calibrated to 20 in-lb (2.26 N-m) to consistently meet most manufacturers' recommended torque requirements for their F connectors
• Audible click indicates when the connector is fully torqued to 20 in-lb
• Made of high carbon steel with a black oxide finish for maximum durability
• Lifetime Warranty

Extra capacity allows use of a smaller size wrench to handle bigger jobs, especially in confined spaces. Knurl turns smoothly for easy operation. Adjustable Wrench 10" Klein 507-10

Extra capacity allows use of a smaller size wrench to handle bigger jobs, especially in confined spaces. Forged heat-treated alloy steel for maximum strength and light weight.

Designed to reach shielded F connector fittings with a preset torque of 30 in-lb, this right angle swivel torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening.
This torque wrench features the following:

• Provides a snug fit when used on 7/16" F Connectors
• Security shield is permanently attached and pivots in 90° increments
• Calibrated to 30 in-lb (3.39 N-m) to consistently meet most manufacturers' recommended torque requirements for their F Connectors
• Audible click indicates when the connector is fully torqued to 22 in-lb
• Made of high carbon steel with a black oxide finish for maximum durability
• Lifetime Warranty

Versatile wrench fits nuts and bolts up to 1-5/16'' (33 mm). Convenient and handy size (11 total length) with a continuous-taper handle (8) for alignment of bolt and rivet holes. Forged from select alloy steel. Handy lanyard hole. Eliminates the need for carrying several fixed-size wrenches. Precision-machined jaws are individually chosen and assembled by hand for smooth operation. Heat-treated for long life. Knurl turns smoothly for easy operation.

Extra capacity allows use of a smaller size wrench to handle bigger jobs, especially in confined spaces. Forged heat-treated alloy steel for maximum strength and light weight.

Special wrench for replacing drive wheels on the J2 lasher.
Two needed to replace wheel 2 Required - J2/C2

Similar to standard lineman's wrench, but with the openings sized to NEMA hardware specifications. Large end has 1-1/16" and 1-3/16" openings. Small end has 11/16" and 7/8" openings. Bell System Type Wrench Klein 3146B

For 3/4" hardware Large end has 1-1/16" and 1-5/16" openings. Small end has 5/8" and 3/16" openings. Forged from special bar steel and heat-treated for long life. Each end has two different size openings.Hole is provided at larger end for turning-in standard pole steps. Lineman Wrench 3/4" Klein 3146A

For 5/8" hardware Large end has 29/32" and 1-3/32" openings. Small end has 5/8" and 7/8" opening. Forged from special bar steel and heat-treated for long life. Each end has two different size openings. Hole is provided at larger end for turning-in standard pole steps. Lineman Wrench 5/8 Klein 3146

• Ratcheting wrench features six sizes in one tool (6-in-1)
• 3/4-Inch, 13/16-Inch, 1-Inch and 1-1/8-Inch combination square sizes
• 9/16-Inch and 3/4-Inch hex sizes
• Works on most common utility pole hardware, such as lag bolts, ''C'' clamps and suspension bolts
• Ratcheting Wrench's bolt-through design allows bolts to pass through the socket
• Fully integrated handle for durability and non-slip grip for comfort
• Bright yellow socket for easy visibility

• Ratcheting Wrench features six sizes in one tool (6-in-1)
• 3/4-Inch, 13/16-Inch, 1-Inch and 1-1/8-Inch combination square socket sizes
• 9/16-Inch and 3/4-Inch hex sizes
• Works on most common utility pole hardware, such as lag bolts, ''C'' clamps and suspension bolts
• Fully integrated handle for durability and non-slip grip for comfort
• Heavy duty design
• Smaller gear teeth for optimal use (shorter throws) in tighter spaces
• Bright yellow socket for easy visibility

Dual End Lineman Wrench 12" Lowell 103TDE

Triple Dual End Ratcheting Lineman Wrench.
Lineman's Wrenches for high line utility pole installation and repair.
103TDE WRENCH 12 INCH HANDLE.
REVERSING CONTROL AT BOTH ENDS
BOLT-THRU DESIGN
OPENING 13/16″ x 1″ x 1-1/8″ SQ SOCKET W/ 9/16″ x 3/4″ HEX GEAR

Five socket sizes in one wrench:

-Square- 3/4"(oversize), 1" & 1-1/8"
-Hex - 9/16" & 3/4"
-(3/4" Hex also turns 5/8" square nuts)

MILWAUKEE® Lineman's 5-in-1 Ratcheting Wrench features the most durable ratchet. The ratcheting wrench has built-in strike face offered in both milled and smooth, providing you with a dedicated surface for hammering. These wrenches have large directional switches that you can easily press while wearing gloves. The durable forged steel construction provides you with longer tool life. The wrench fits 3/4", 1", and 1-1/8" square sockets and 9/16" and 3/4" standard sockets.