Voltage Tester The Fluke Networks® C9970 High Voltage Detector detects AC and DC voltages through a long-life carbide tip. Protect yourself and other technicians by using this simple device to test conductive objects within minutes, you can avoid exposure to high voltage electrical shock. It only requires interaction with a source of energy and a pull of the trigger to use. A green LED indicates the area is free of hazardous voltage. If a red LED flashes, hazardous voltage is present. Low-voltage threshold is 50 V AC RMS and up or 6 V DC and up. High-voltage protection is up to 20,000 V AC RMS or 2000 V DC.

Voltage Tester The Fluke Networks® C9973 High Voltage Detector detects AC and DC voltages through a long-life carbide tip. It only requires interaction with a source of energy and a pull of the trigger to use. A green LED indicates the area is free of hazardous voltage. If a red LED flashes, hazardous voltage is present. Low-voltage threshold is 50 V AC RMS and up or 6 V DC and up. High-voltage protection is up to 20,000 V AC RMS or 2000 V DC.

Web-Strap Ratchet Hoist has a large, non-conductive dial (drum knob) allows web slack to be adjusted with ease. The hoist has a 360 handle rotation and a 3/4 ton single line and 1 1/2 ton double line load rating. Tight ratcheting mechanism allows precise tensioning.
Single Line Load Rating: 1500 lbs. (680 kg)
Double Line Load Rating: 3000 lbs. (1361 kg)
Weight (lbs.): 12.5 lbs. (5.7 kg)
Single Line Pulling Distance: 20'' (508 mm) - 138'' (3505 mm)
Double Line Pulling Distance: 26'' (660 mm) - 138'' (3505 mm)

HUBBELL PSC3090451 R.G Strap Hoist convertible strap hoist convertible strap hoist.
Take-up wheel cogs for hand operation and holes for extension hot sticks. Easy-access shifts and release key operate by hot sticks or by hand, even with gloves. Lifetime-lubricated (oil impregnated) bronze-sleeve bearings in hook swivels.
STRAP HOIST CHAIN HOIST 3/4 TO 1-1/2 Ton
20" handle/aluminum housing 5.5' standard lift distance 3-Ton rating 60 lbs. handle pull at rating 20" hook-to-hook minimum

Hubbell PSC3090452-HS Convertible Hot-Stick Handle Nylon-Strap 3/4 - 1-1/2
Convertible Hot Stick Nylon-Strap 3/4-1 1/2 (H/S), Adapts immediately to varying field needs. Adds 3 ft of lift-distance capability when rigged at the lower rating. To rig hoist for higher rating, keep load-hook sheave mounted midway on strap when it is becketed (doubled, with the end of strap secured to hoist frame). To convert to lower rating, secure the load hook sheave through loop in strap free end.
Specifications:

• Strength Rating - Ultimate: 3,000 lbs
• Style: Convertible Strap Hoist
• 20" handle/aluminum housing 5.5' standard lift distance 3-Ton rating 60 lbs. handle pull at rating 20" hook-to-hook minimum

Measures pole heights and conductor clearances from the ground. Universal end fitting on the insulated top section accepts a wide variety of attachments so that the lineman can disconnect switches, replace cut out tubes and reclose, remove pole covers, prune trees, etc., with one tool. Measuring scales are easy-to-read, with figures silkscreened on orange fiberglass sections. English scales are marked with each 1' increment designated in a box, each inch in bold numbers and half inches designated by intermediate bars. Metric scales similarly display meters, decimeters and centimeters. A positive spring-loaded locking-button mechanism and safety plug feature in each section prevent separation of the tool; once snapped into place, the buttons securely lock into position. Retract to approximately 5 ft. so that they can be carried on most trouble trucks, often in the cab section. Heavy duty, spring-loaded plastic buttons keep the extended tool sections securely locked in position. As each section is extended and twisted slightly, the buttons pop into place, allowing working to be done with complete control and confidence.