Klein's precision flush cutter shears soft wire up to 18 AWG producing a flat, straight cut. The ultra slim profile makes it easier to get into tight spaces. Cushioned grips and steel spring return help reduce fatigue when making repetitive cuts. The blades are heat treated for long life. This is your go-to tool when you want precision and control when cutting soft wire.

Quickly installs and removes spring-tension hose clamps. Grips with either end or side of jaws for work in confined areas. Nickel-chrome plated for long life.

High-leverage design. Rivet is closer to the cutting edge for 36% greater cutting and gripping power than other plier designs.
Cuts ACSR, screws, nails and most hardened wire.

Hinge opening holds and cleans 5/8'' (16 mm) pole line and hardware bolts or threaded rods.
High-leverage design. Rivet is closer to the cutting edge for 46% greater cutting and gripping power than other plier designs.

The high-leverage design of these 8'' (203 mm) Diagonal-Cutting pliers provides 36% greater cutting power than other pliers. The angled head design makes work easier in confined spaces. The hot-riveted joint ensures smooth action with no handle wobble.

Angled head design for easy work in confined spaces. High-leverage design. Rivet is closer to the cutting edge for 36%. greater cutting and gripping power than other plier designs. Short jaws and beveled cutting edges permit close cutting of wire. Induction-hardened cutting knives for long life. Hot-riveted joint ensures smooth action and no handle wobble.

The Klein 288-08 Diagonal-Cutters have a high-leverage design for 36% more cutting power than other pliers. State-of-the-art, dual-material Journeyman™ handles provide a better grip without sacrificing tool strength and durability. Short jaws and beveled cutting edges let you cut wire closely. The hot-riveted joint ensures smooth action and no handle wobble while the cutting knives are induction-hardened for long life.

Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol. Two layers of insulation provide protection against electric shock. Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool. Wide range of versatile jaw positions. Secure tongue and groove design for non-slip grip - even with heavy pressure.

• Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
• Two layers of insulation provide protection against electric shock
• Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
• Wide range of versatile jaw positions
• Secure tongue and groove design for non-slip grip - even with heavy pressure
• A flame retardant, impact-resistant, bright orange outer coating
• Integral guards help prevent hand contact with conductive parts

• Type: Pump
• Application: For work near energized sources
• Overall Length: 10.25" (1.2 cm)
• Jaw Capacity: 0.484" (4.5 cm)
• Handle Color: Orange/Gray
• Handle Finish: 3-Layer
• Handle Length: 5.5" (14 cm)
• Handle Material: High-Dielectric Plastic
• Insulated: Yes

Klein Tools 10 inch (254 mm) Pump Pliers feature a secure tongue and groove design for a non-slip grip even when heavy pressure is applied. It has a tension-loaded joint to reduce handle wobble for sure gripping. Plastic-dipped handles provided added comfort and ease of identification.

• Quick-Adjust rivet allows one-handed fast, easy adjustment of plier jaws
• Smoothly adjusts between six machined tongue and groove jaw positions
• Secure tongue and groove design for non-slip grip - even with heavy pressure
• Wide range of versatile jaw positions
• Tension-loaded joint to reduce handle wobble for sure gripping
• Innovative dual material Journeyman™ handles are more comfortable and last longer than other handles

• Overall Length: 10.25" (26 cm)
• Jaw Width: 1.75" (4.5 cm)
• Jaw Capacity: 1.75" (4.5 cm)
• Hand Color: Yellow/Black
• Handle Finish: Journeyman

Klein Tools 10 inch (254 mm) Pump Pliers feature a secure tongue and groove design for a non-slip grip even when heavy pressure is applied. It has a tension-loaded joint to reduce handle wobble for sure gripping. Plastic-dipped handles provided added comfort and ease of identification.

Tightens 1/2'' and 3/4'' EMT or 1/2'' rigid locknuts. Fits liquid tight fittings and caps. Reams and smoothes both inside and outside of conduit. Knurled jaws at nose tip pull wire or fish tape. Machined nose fits snugly into locknut wings.

9" High-Leverage Lineman's Bolt-Threading
Holding Hinge opening holds and cleans 5/8" pole line and hardware and bolts or threaded rods

Quickly and easily pulls 1/8'' (3 mm) or 1/4'' (6 mm) flat steel fish tape without damaging the tape. High-leverage design. Rivet is closer to the cutting edge for 46% greater cutting and gripping power than other plier designs. Induction hardened cutting knives for long life. Hot-riveted joint ensures smooth action and no handle wobble. Streamlined design with sure-gripping, cross-hatched knurled jaws.

These Lineman's Side-Cutting pliers feature induction hardened cutting knives for long life. The 2000 series blades are designed for heavy-duty cutting of ACSR, screws, nails, and most hardened wire. The high-leverage design provides 46% greater cutting power than other plier designs. Exclusive handle tempering absorbs the ''snap'' when cutting wire. Pick up these Klein's and feel the difference.

These Long-Nose Side-Cutting Pliers are made of custom, US-made
tool steel that features induction hardened, long-lasting cutting
knives. The knurled jaws provide sure wrapping and looping.

Cleanly strips 12 AWG solid wire. Heavier design for greater cutting power. Extended handles provide added reach and leverage. Slim head design for working in confined areas. Induction hardened cutting knives for long life.

Shear-type cutter for precision wire cutting. Two versatile jaw positions. Serrated jaws provide sure-gripping power. Nickel-chrome plated for long life.

The 6-in. Long-Nose, Side-Cutting Pliers are made of the finest U.S. steel alloy. They are forged, precision machined, hardened and carefully tempered for maximum strength and faultless performance. The long nose pliers with side cutters have knives that meet at the hinge first and then meet at least one-half of the knife length. This precise knife-closing design increases knife life and facilitates resharpening. Pliers are individually adjusted to meet performance standards far exceeding application requirements.

Crimps and seats Scotchlok UG, UR, and UY connectors. Hot-riveted joint for smooth action and no handle wobble. Curved handles for greater control. Induction hardened side-cutting knives for long life. Spring-loaded action for self-opening.

.

.

Klein wire stripper6-12 AWG, Precision shear-type blades for clean cuts on stranded copper wire....

Compact, lightweight wire-stripping and cutting tool. Narrow nose fits into tight places. Hardened steel with...