18HP Arnco Power Pack TM351. Can be used with the Manta Ray Utility Anchor System.

REFURBISHED

Anchor, Tool, Drive End Wrench, Yellow Band, rated 10,000 ft-lbs, 7ft long

Hubbell C1021583 Anchor, Tool, Drive End Wrench, Orange Band, rated 10,000 ft-lbs, 7ft long

Hubbell C3030983 Anchor, Tool, Drive End Wrench, Red Band, rated 15,000 ft-lbs, 7ft long

10K Drive Wrench Assembly for installation of scew anchors. Complete tool system includes Drive Wrench options, Wrench Lock, and Adapter.

Hubbell 630013 Standard Kelly Bar Adapter 10,000 Ft Lbs (13,558 N-M) for 2" (50.8 mm) Hex Kelly Bar

Hubbell 630012HD Standard Kelly Bar Adapter 10,000 Ft Lbs (13,558 N-M) for 2 5/8" (66.7 mm) Hex Kelly Bar

Hubbell E3030255 This tool bolts directly to the installer's output flange or Kelly bar adapter having six 1/2" dia. holes on a 5-1/4" bolt circle. Adjustable pivoting plates accept rods from 3/4" to 1-1/4" diameter.

HUBBELL C3030045 Shear Pins 50lbs
Pin for Shear Torque Indicator. Sold in packs of 1,700

To be use with PISA® Anchor Rod 1" X 7' D100 PISA® Anchor Rod 1" x 3' 1/2" or PISA® Anchor Rod 3/4" x 7' D75 Only.

HUBBELL C3030045/S Shear Pin 50lbs (SURPLUS)
Pin for Shear Torque Indicator. Sold Each

To be use with PISA® Anchor Rod 1" X 7' D100 PISA® Anchor Rod 1" x 3' 1/2" or PISA® Anchor Rod 3/4" x 7' D75 Only.

Stanley Hydraulic Tools Clay Spade 8" ( 20.3 cm ) for Handheld Breakers BR45/BR50/BR67/BR87

Hubbell C3031836 Digital Torque Indicator with Display

Digital Wireless Torque Indicator with wireless display

The C-71-5H Earth Drill is the work-horse of the Ground Hog line, tried and tested for over 30 years. Also known as an " Anchor Drill". This is a two man drill. Auger Bits sold separately.

Auger Extension 3' GROU-EX3, Ground Hog offers a large range of augers and accessories for our earthdrills to cover all types of soil conditions and customer requirements.

Ground Hog offers a large range of augers and accessories for our earthdrills to cover all types of soil conditions and customer requirements

Ground Hog Pengo Drill 4" x 3'. Ground Hog offers a large range of augers and accessories for our earthdrills to cover all types of soil conditions and customer requirements.

Stanley Hydraulic Tools Heavy Duty Moil Point 18" ( 45.7 cm ) for Handheld Breakers BR45/BR50/BR67/BR87

Hubbell C3030044 Shear Pin Torque Limiter 6-Bolt, Anchor

6 1/2" BOLT 5 1/4 CENTER This is an attachment and goes with the Kelly Bar Drive End Wrench and the Kelly Bar Adapter to install anchors. The Locking dog weighs 20 pounds and is 7 inches high. C3030069HD

1-1/4" hex x 6" shank,

1-1/8" hex x 6" shank, 15-1/2" OAL

The SGC-14 drive steel kit, or a GADD set, will drive and install Manta Ray Anchors.
Designed for 1-1/4" x 6" chuck hammer/breakers

MANTA 50655 SG-4HD HEAVY DUTY COUPLER

The Stanley BR87 Hydraulic Jack Hammer is a heavy duty tool for work in the 90 pound class and above for 8+" Manta Ray Installation, & concrete applications.

Complete Kit Hydraulic Auger MANTA LB-1 50093

MANTA LB-4SSC 50102, 4 X 42" Auger with Carbide Tip for HDL-210 Replacement

MANTA LB-9054 50117 4" X 36" Auger Snap-On Extension

Manta Ray 50172 LL-2. Light Duty Hand Pump.The LL-2 Anchor Locking kit is designed to Load Lock and proof test Small Manta Ray and Duckbill anchors.

Out Of Stock

Manta Ray  Anchor Tags

The Manta Ray load locker Manta Ray LL-1 is required to load lock and proof test the anchor.

Manta Ray 50233 SG-2, a 33" Drive Steel Extension is a
patented design made of high performance materials.

Manta Ray 50424 SG-X Drive Steel Extractor Bar is used in conjunction with the LL-1 Load Locker to extract any drive steel that happens to get stuck underground.

Manta Ray Replacement (#50254) Force Gauge with Range Marking Sticker and (#50253) Coupler for
Manta LL-1 Load Locker. *REPLACEMENT PART ONLY*

Manta Ray 50127 Hydraulic Control Valve and Plate LL-1. The Manta Ray load locker Manta Ray LL-1 is required to load lock and proof test the anchor.

The Manta Ray load locker Manta Ray LL-1 is required to load lock and proof test the anchor.

Manta Ray 50236 SG-3, Radiused Drive Tip 30", this piece is shaped to fit into the anchor on one end and threaded on the other end to accept a coupler.

Complete setup to drive a Manta Ray anchor into the ground. When pulled the Manta Ray will lock horizontally into the ground never coming loose. One of the best ways to assemble a down guy.

REFURBISHED USED

The Manta 50382 Stanley GT18 hydraulic power unit is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both type 1 and 2 hydraulic tools.

The Stanley TA54103 Hydraulic Tamp is ideal for soil compaction around utility poles, sign and fence posts. It provides 1,600 blows per minute with a long 2-1/2 inch stroke for optimum compaction.

Commonly referred to as a Strand Dynaometer, the Strand Tensionmeter is used in tensioning new.

Pulling Eye 1/2" - 1" Wagner Smith PE-1 6000lbs. PE-1 AUXILIARY PULLING EYE PENGO
30,000 LB. ULTIMATE BREAK STRENGTH