The Scotchlok TM UR 2 Connector is a butt-type connector which employs a specially designed insulation

Cable Capacity: 2 (.750) produces 36” overall length loop. Easy-grip pawl ensures positive engagement into gear rack....

Cable Capacity: 2 (.750) produces 36” overall length loop. Easy-grip pawl ensures positive engagement into gear rack....

Cable Capacity: 2 (.750) produces 36” overall length loop. Easy-grip pawl ensures positive engagement into gear rack....

Cable Capacity: 2 (.750) produces 36” overall length loop. Easy-grip pawl ensures positive engagement into gear rack....

LEMCO Y-190 CENTER CONDUCTOR CLEANER.

CATV RG11 CONNECTOR Digicon PVFC11
Digicon PVFC11 RG11 Universal Compression Connector, Nickel, (EACH)

The Gator is used on any hardline cable after it has been stripped and cored to bevel and fully clean the center conductor.

• Blade locks in several positions to make longitudinal cuts for end stripping, spiral cuts for end and mid span stripping, and circular cuts for jacket removal
• Black adjustment knob allows you to set the blade at precise depths to cut cable jackets perfectly every time
• Grey knob rotates blade for three different slitting options: ring, spiral, or longitudinal
• Can cut through a variety of jacket materials such as PVC, rubber, PE, and many more
• Spring-loaded cable holder allows tool to hold cable sizes from 3/16" to 1 1/8" (4.5 mm-29 mm) in diameter
• Ergonomic handles allow you to easily open the tool to insert cable

• Strips insulation off of cables that are 1/8”-3/8” (3.2 mm-9.6 mm) in diameter
• Self-adjusting blade strips PVC, plenum, and other types of insulation quickly and easily
• Safely strips insulation without damaging inner braids, foils, or conductors of cables

• Blade can be fixed in the slitting or ringing positions using the swivel lever
• Blade height can be adjusted for precision stripping from 0 - 3 mm
• Hardened steel blade slices through hard jackets and tubes with ease
• High polymer construction for long life and durability
• Compact design is perfect for on-the-go use

The PATENTED Jonard Tools Fixed Design Long Compression Tool is designed for use on long style F connectors, such as the PPC EXXLWS Aquatight or EX-XL connectors. The tool is ideal for installing CATV network cables.

This Fixed Design Short Compression Tool is designed for use on short style F connectors, such as the PPC EX connectors. The tool is ideal for installing CATV network cables.

Jonard Tools FT-2075 Outer Conductor Flaring Tool is specially designed to flare outer conductors on Eupen 7168, A7168, and CommScope CA519 75 Ohm corrugated copper cable.
Features

• Ergonomic screwdriver-like handle for more comfortable gripping and easier flaring
• Made of high carbon steel with a black oxide finish for maximum durability

Jonard Tools FT-6 Flaring & Insertion Tool is designed to facilitate the expansion of cable. This flaring tool is the perfect tool for spreading COAX cable jackets, which allows easy insertion of F connectors.
Features

• Perfect for use on polyethylene jacketed, plenum, tri-shield, and quad-shield RG6 cables
• Alleviates the bunching of aluminum foil behind the connector, providing easy F connector installation
• Made of heat treated carbon steel with a black oxide finish for maximum durability and cold weather functionality
• Flaring end of tool is used for RG6 and Quad RG6 Cables
• Insertion end of tool is used for RG6, RG59, and RG11 F Connectors

• 12" overall length allows you to reach BNC connectors in hard-to-reach places
• Ergonomically designed handle provides increased comfort and leverage
• Made from a high-quality materials for maximum durability and long life

• Compact design allows you to reach connectors in hard-to-reach places
• Knurled handle provides a secure grip while using the tool
• Steel loop can easily attach to a carabiner or key ring and can be used to facilitate removal or installation of connectors
• Made from a high carbon steel alloy with a nickel-plated finish for maximum durability

• 12" overall length allows you to reach connectors in hard-to-reach places and head size is 7/16"
• Ideal for use with both F and BNC connectors
• Ergonomically designed handle provides increased comfort and leverage
• Back of the handle an insertion device to assist in making connections
• Made from high-quality materials for maximum durability and long life

With two 7/16” hex sockets and included LC & LG and LB & LS Slam Keys, this kit is the perfect tool for opening LB, LS, LC, and LG outdoor pedestals.

Designed to be used on 7/16” hex shielded F connectors, this security shield tool is perfect for use with torque wrenches to lock security shields onto connectors.
This security shield tool features the following:

• Can be used with a torque wrench for precise torque adjustments
• Perfect for use on SS-1D and EZ-NLS security shields and NSS Notch-Trap sleeves
• Machined and heat treated steel with black oxide finish for maximum durability
• Knurled handle for secure gripping
• Steel loop included for better leverage and easy storage

Designed to be used on 9/16” hex shielded F connectors (RG11), this security shield tool is perfect for use with torque wrenches to lock security shields onto connectors.

Designed for use on various locking terminators, this terminator tool makes it easy to access ports between trap shields.
This terminator tool features the following:

• 4 1/2” length with a 2 1/2” shaft and 1” diameter handle - this tool provides easy access to hard-to-reach places
• Tip is designed to keep out foreign debris
• Compatible with: Gilbert Engineering GTP (Morlock), PRC (Production Products Company), LFT, PCT (International Technology), TPG, TR 75 GTL (Viewsonics), SV-LT and SV-LTA (Signal Vision) locking terminators, NO-3-Pedlock, NO-4-Pedlock pedestal locks
• Shaft is made of chrome vanadium steel for maximum durability

Designed for use on various locking terminators, this terminator tool has an ergonomically designed handle for enhanced grip and superior leverage.
This terminator tool features the following:

• Tip is designed to keep out foreign debris
• Compatible with: Gilbert Engineering GTP (Morlock), PRC (Production Products Company), LFT, PCT (International Technology), TPG, TR 75 GTL (Viewsonics), SV-LT and SV-LTA (Signal Vision) locking terminators, NO-3-Pedlock, NO-4-Pedlock pedestal locks
• Shaft is made of chrome vanadium steel for maximum durability

Designed for use on Viewsonics 2 and 3 prong terminators as well as other locking terminators, this terminator tool has an ergonomically designed handle for enhanced grip and superior leverage.
This terminator tool features the following:

• Prongs designed for Viewsonics 2 and 3 prong terminators
• Tip is designed to keep out foreign debris
• Compatible with: Gilbert Engineering GTP (Morlock), PRC (Production Products Company), LFT, PCT (International Technology), TPG, TR 75 GTL (Viewsonics), SV-LT and SV-LTA (Signal Vision) locking terminators, NO-3-Pedlock, NO-4-Pedlock pedestal locks
• Shaft is made of chrome vanadium steel for maximum durability

The Jonard Tools TTB-6 Barrel Lock Plunger Key is designed to unlock Channell LK03029817 and Highfield 93180775-S CATV barrel locks quickly and easily. It only works with these 2 types of locks with inside diameters from 0.176" to 0.196" (do not try to use for other purposes as it will not work).

Designed with a cam style locking terminator tip for use on Corning Gilbert style terminators, this tool is perfect for use on the Gilbert NS-5762-3 or other similar types of terminators.

Designed with a cam style locking terminator tip for use on Corning Gilbert style terminators, this tool is perfect for use on the Gilbert NS-5762-3 or other similar types of terminators.

The Jonard Tools P key (also known as a skeleton key) is designed to work with Channell locks and other similar pedestal locks. It can be used on many popular pedestals and opens most heavy duty spring-lock cabinets.
This P key features the following:

• Made of high quality brass for increased durability
• Small frame to be stored easily on a keychain for convenience

Two tools in one, the TTS-716 combines a trap wrench with a security sleeve tool to make it the perfect combo tool for all standard traps and all sizes of security sleeves.

• 50 HRC stainless steel construction for precision stripping and enhanced durability
• Ergonomic curved handle design is naturally comfortable to hold and reduces hand fatigue
• Coil spring reduces hand fatigue when using the tool for extended periods of time
• Conveniently located bending holes makes wire looping quick and easy
• Includes cutting holes for 8-32 and 10-32 threaded screws

Polywater® Type HP™ is the best option for reducing the number of different solvents used in maintenance and cleaning operations. It is excellent for termination of medium and high voltage cables, and for degreasing a wide variety of apparatus, including switchgear, contacts, transformers, and electrical motors.

The LTT-7 Locking Terminator Tool is 7" in length with a handle diameter of 1.25".
Use the LTT-7 on Corning Gilbert GTP, PCT Int'l TPG, PDI Inc PTP59/59PLR/59PB, PPC LFT
& PST, Signal Vision SV-LT/LTA, and Viewsonics TR75GLT locking terminators.

For removing residual dielectric from the conductor of all sizes of trunk and distribution cables....